################################################
### ---     Thinstation Build Config     --- ###
################################################
#
#
# This is Thinstation s basic setup file. In this file you decide which
# hardware, programs and features to be included in the Thinstation
# boot image generated by running "./build".
#
# You can customize/limit the possibilities in the thinstation.conf
# files later.
#
# Anything after a "#" is a comment. You activate "things" by removing
# the "#" and remove "things" by putting a "#" in front of them.
#
# First we define which modules to include. Modules are hardware
# drivers. NEVER include more than necessary - the more modules, the
# longer boot time.


########################################################
### --- Machine Modules to include in boot image --- ###
########################################################

# A machine profile is a set of modules for a specific set of hardware
# components like a thinclient with adapters. It does not include any
# filesystem modules, those need to be selected individualy. Making a
# a machine profile is a two step process. First you will need to make
# an allmodules build like "./build --allmodules" with the extensions-x
# package included. Once the client machine is booted with that image
# you can open and xterm or telnet in and run "hwlister.sh". hwlister.sh
# will compile some lists and attempt to post them to the pxe server assigned
# to the client. If the pxe server is this workstation and you are hosting
# files directly out of this build env, you can then run
# "./mkmachine SOME-MODEL" and the files will be put into the machine folder
# under that model name. Now all you have to do is add a line to this file
# like "machine SOME-MODEL" and you will no longer have to make
# allmodules builds. If this is not the pxe server, you will have to
# move stuff around on your own, but the most important files are
# modules.list and firmware.list.


################################################
### --- Modules to include in boot image --- ###
################################################

# Any modules may be added as "module" or "module_pkg".
# If defined as a "module", the driver is included in the boot image.
# If defined as a "module_pkg", the driver is added from outside the
# image, such as from a tftp server.  See note below for more details.
#
# Normally you should use "module".  Only use "module_pkg" if you want
# to dynamically load modules.
# Note: If you create a module_pkg network driver, and decide to load it
#       from a tftp server, it won t work.  This is because the image
#       won t have a network driver to get the module_pkg in the first
#       place.


#!Hardware
#!!Machine module list

#machine m704				# Gigabyte m704 Rover PC
#machine WYSE9150se			# WYSE 9150se Thin Client
#machine NT-A3500			# Foxconn AMD E-350 Barebone
#machine NT-535				# Foxconn Intel D525 Barebone
#machine Dell-FX170			# Dell FX170 D525 Atom Machine
#machine VMWare				# A good set of modules for a VmWare Virtual Machine
#machine Virtualbox-4.1			# A good set of modules for a Virtualbox Virtual Machine
#machine VIA-Epia-CLE266		# VIA Epia/Eden based on the the CLE266 chip. Rather common in thin clients a few years old
#machine classic_generic		# Big list of modules that you can choose by unremarking them
#machine IGEL-M300C                     # Igel CX700 Via
#machine HP-t5135                       # HP CX700 Via
#machine thin				# For my test thinclient

machine 3QNTP-Shell-E350D



#!!Wireless Stuff

#package wpa_supplicant
#package wireless
#package wifi-connect

#!!!Misc Modules

#!!Filesystem Support

# Every mounted device needs a filesystem, so choose which ones you need.
module usb-storage
module autofs4          	# Automount and autofs support
#module isofs            	# ISO9960 file system support for CDRoms
#module udf			# CDRom UDF file system support
module vfat             	# Fat and VFat file system support
module ntfs             	# NTFS file system support
#module ext2             	# Ext2 file system support
#module ext3	            	# Ext3 file system support
#module ext4			# Ext4 file system support
#module nfs             	# NFS file system support
#module cifs			# CIFS support (use either this or smbfs - not both)
module squashfs
module nls_cp866
package ntfs-3g 		# Read-write NTFS driver




#################################################
### --- Packages to include in boot image --- ###
#################################################


# A package is a program or utility.
# Any packages may be added as "package" or "pkg".
# If defined as a "package", the program is included in the boot image.
# If defined as a "pkg", the program is added from outside the image.
# Normally, you should use "package".  Only use "pkg" if you want to
# dynamically load programs.


# --- Packages to include in boot image
# --- Packages below may be "package" or "pkg"


#!!Miscellaneous
package hwclock		# Utility to set system time from hardware clock (More Complete than whats already in BusyBox)
#package rdate			# Utility to obtain date & time from network
#package ntp			# Utility to obtain date & time from network (only use one of these)
#package sound-esd		# Enable sound-esd or sound-nasd if you want to be able to control
package sound-nasd		#  sound on your thin client from another computer or
                        	#  your remote session.
package autofs
package alsa-lib
package alsa-utils
#package gnome-media
#package gnome-core
#package kismet
#package gst-plugins-base
#package gst-plugins-good
#package gstreamer
#package crystalhd
#package libva
#package iptables		# IP Tables support
#package cpufreq
#package cpuspeed
#package wine			# Windows Application Execution Platform


#!!X related
package 915resolution		# This software changes the resolution of an available vbios mode.
# --- XOrg 7.6
#package xorg7-ark
package xorg7-ati
#package xorg7-cirrus
#package xorg7-fbdev
#package xorg7-geode
#package xorg7-glint
#package xorg7-intel
#package xorg7-mga
package xorg7-modesetting
#package xorg7-neomagic
#package xorg7-nvidia
#package xorg7-nouveau
#package xorg7-nv
#package xorg7-openchrome
#package xorg7-savage
#package xorg7-siliconmotion
#package xorg7-tga
#package xorg7-trident
#package xorg7-v4l
package xorg7-vesa
#package xorg7-vmware
#package xorg7-ztv
#package ts-classic


#!!Locale or localization files for keyboard and fonts.  (Language/Country)
#package locale-cs_CZ  # Czech
#package locale-da_DK  # Danish
#package locale-de_DE  # German
#package locale-en_GB  # English-Great Britain
package locale-en_US  # English-US
#package locale-es_ES  # Spanish
#package locale-fi_FI  # Finnish
#package locale-fr_BE  # French Belgium
#package locale-fr_CA  # French Canadian
#package locale-fr_CH  # French Switzerland
#package locale-fr_FR  # French
#package locale-hr_HR  # Croation
#package locale-hu_HU  # Hungarian
#package locale-it_IT  # Italian
#package locale-ja_JP  # Japanese
#package locale-nb_NO  # Norwegian (bokmål)
#package locale-pl_PL  # Polish
#package locale-pt_PT  # Portuguese
#package locale-pt_BR  # Portuguese-Brazil
package locale-ru_RU  # Russian
#package locale-sv_SE  # Swedish
#package locale-tr_TR  # Turkish


#!Applications

#!!Connection Package types.  Choose *at least* one!

#package freerdp			# X RDP Client - fork of rdesktop
package rdesktop		# X RDP client for Windows Terminal Services (ver 1.7)
#package autonet
#package rdesktopsvn
#package vncviewer		# VNC client (vncviewer)
#package xorg7vnc		# Remote Control Client Workstation
#package ica			# Citrix ICA client support
#package tarantella		# Tarantella client support
#package xnest			# XDM in a window client
#package urxvt            	# Light Xterm Client (vt102)
#package xterm           	# Xterm Client (vt220)
package ssh 			# Secure Shell client
#package tn5250          	# 5250 terminal emulator
#package dillo			# Dillo light web browser
#package thinlinc		# Cendio ThinLinc client support
#package nx              	# No Machine NX client
#package 2x			# 2X client
#package java			# Java runtime
#package firefox_lowmem		# Firefox 3 for low resource machines
#package firefox		# Firefox current Web Browser
#package chrome			# Google Chrome Web Browser
#package kiosk			# Rkiosk Plugin for Firefox
#package flash_lowmem		# Flash 9 browser plugin for firefox and low resource machines
#package flash			# Flash Current
#package filezilla		# FileZilla FTP Client for X
#package git			# GIT Version Control System
#package giggle			# Commit browser for GIT
#package gparted		# Gnome Partition Manager
#package open-vm-tools
#package medit			# Notepad
#package mplayer		# DVD and video player
#package vmview                 # VMware Open-View Client, no PCoIP
#package xbmc			# XBMC Media Center for X
#package xpdf			# X PDF Viewer


#!!Window Managers. Choose no more than 1 window manager.
# Not needed if you don t want to manage windows.

#package openbox		# A spartin clean/fast window manager.
#package xdesktop-kiosk		# A locked down desktop kiosk using the openbox wm (See packages/xdesktop-kiosk/build/conf for
 				# more help.

package icewm			# "ICEWM" window manager.  Makes TS a light workstation.
package icewm-theme-xp
#package icewm-themes		# Extra IceWM themes
#package icewm-theme-bernstein
package icewm-theme-bluecrux
#package icewm-theme-liquid


#!!Window Manager Utils

#package idle-shutdown		# Package that lets you specify automatic shutdown settings and logic.
package wbar         		# Adds icons to desktop
#package idesk


#!!Other services

pkg usbsrvd			# USB devices on remote Terminal Server
#package www 			# Web access to client.  From a browser: "http://<IP number>"
                        	#  The standard page is for general user settings, administrative access
                        	#  is on port 6800.
package lp_server		# Remote printing daemon (JetDirect compatible)
#package lpr             	# LPR Print Server, for use with samba-server 
package
package lprng           	# LPRng Print Server, supports network based printing
package foo2zjs			# Firmware for HP LaserJet 1000, 1005, 1018, 1020
#package sshd 			# Dropbear secure shell server
#package tftpd 			# Built in tftpd server. Useful for making a tftpserver
				#  for thinstation on a WAN over a slow link.
#package samba-server		# Samba server FS Support, allows you to share
                        	#  local floppy/cdrom/hd/printer to other Windows
				#  PCs. Needs supermount for removeable media.
#package samba-client		# Samba smbclient, gives a shell like environment to access an samba server
#package hdupdate       	# Package for updating TS images on a hardisk over a network connection
#package scp	            	# Add ability to download files over internet using scp.  This package
                        	#  adds some networking based options for downloading configuration files or
                        	#  in using hdupdate package.
#package openvpn                # OpenVPN Client Support
package mc			# Midnight Commander



#!!PCSCD Card Readers

#package gemplus410             # Card reader Gemplus 410 (Serial) and Gemplus 430 (USB)
package ccidreader             # Generic USB card reader



#!!Miscellaneous

#package gtk-2.0			# Full gtk-2.0 plus clearlooks theme
#package icons-cursor		# Anti Aliased Mouse Cursor Theme
#package icons-hicolor		# Hi-Color icons for some applications and themes.
#package fonts-misc
#package fonts-jis-misc		# Japanese Industrial
#package fonts-util
#package fonts-cyrillic
#package fonts-Speedo-Bitstream
#package fonts-TTF-BH		# This one works nicely most of the time and is small.
#package fonts-TTF-Liberation
#package fonts-TTF-vera
#package fonts-75dpi-Adobe
#package fonts-75dpi-Adobe-Utopia
#package fonts-75dpi-BH
#package fonts-75dpi-BH-Typewriter
#package fonts-75dpi-Bitstream
#package fonts-100dpi-Adobe
#package fonts-100dpi-Adobe-Utopia
#package fonts-100dpi-BH
#package fonts-100dpi-BH-Typewriter
#package fonts-100dpi-Bitstream
#package fonts-Type1-Adobe-Utopia
#package fonts-Type1-BH
#package fonts-Type1-Bitstream
#package fonts-Type1-IBM
#package fonts-Type1-xfree86
#package lshw			# list hardware
#package e3 			# Basic vi like Editor
#package rox			# Basic File Manager
#package debug			# metapackage to include other debugging packages and stop during bootup to check things.
package extensions		# Adds various shell commands, will increase image size.
#package extensions-x		# Adds various utility s for the X Environment !!!! INCLUDES hwlister.sh !!!!
#package eGalax                 # eGalax TouchKit Drivers/Utility for serial and usb touchscreens by EETI.
#package installer		# Wipes a drive, makes partitions and downloads thinstation from a pxe server
#package devstation		# Starts a tftp server that hosts files from the boot-images/pxe folder



# Parameters

########################################
### --- Miscellaneous Parameters --- ###
########################################


#!!Basic

#param fastboot       true				# Mangles the filesystem a special way as to improve boot spead and reduce
							# memory utilization. Cool/Dangerous . Harder to dubug other packages. (Finishing Touch)
							# Set to 'true' to enable or 'lotsofmem' for slightly slower booting but no squash lag on app launch.
param rootpasswd     secretword				# Do Change!  Console/telnet password for root
                                        		# If this is enabled, Telnetd will be enabled.
param xorgvncpasswd  secretword				# VNC Access Password
param storagepasswd  secretword				# Password for storage server
param dialuppasswd   secretword				# Password for dialin account
param sambapasswd    secretword  			# Password for samba shares when using user mode security
#param kernelcmdline "radeon.modeset=0"                 # Add additional kernel command lines. e.g. disable radeon framebuffer
#param stripelf       yes				# Strip extraneous information from elf binaries (Maybe not Safe)
param acpisupport    enable				# Tells the kernel not to load acpi modules. (Breaks some Intel Chipsets if disabled)

#param uvesafb        disable				# Disable uvesafb (legacy option like modesetfb)
#param extra_vid      LVDS-1:d				# Add an extra video= parameter to kernel cmd line (good for disabling outputs on video cards)
param bootlogo       true				# Enable or Disable the use of the Boot splash.
param boottheme	     default           			# Backgound picture during boot
#param splash	     verbose				# kernel splash setting (0=off, silent or verbose (default=silent)
param splash	     silent
param fbmtrr         0                                  # MTRR value for uvesafb (default = 0, 4 is the best) grep your log to make sure you have not set it to high
#param fbnocrtc      true                               # This is usually a good thing.
param fbsm           ywrap                              # Window scrolling method (redraw, ypan, ywrap) ywrap is best, but may not work correctly for all people
#param fbvtotal       16                                # Override Video Bios Reported Memory in MB
#param fbmaxhf        67                                # Override Video Negotiated Max Horizontal Frequency
#param fbmaxvf        61                                # Override Video Negotiated Max Vertical Frequency
#param fbmaxclk       155                               # Override Video Negotiated Max Clock Frequency
#param fbnoedid       true                              # Don t do video edid
#param bootresolution 1024x600-32                       # Resolution used during Thinstation boot.
param bootresolution 1024x768-32                        # You can wright your own resolution mode here, if you know it.
#param bootresolution 1366x768-32                       # Otherwise, you may want to refer to the vbe_modes.list you created with hwlister.sh
#param bootresolution 1280x1024-32                      # for modes that your card supports.
#param bootresolution 1400x900-32                       # It is also used by xrandr if no xrandr options are specified.
#param bootresolution 1680x1050-32
#param bootresolution 1920x1080-32
#param bootresolution 1400x1050-32
param desktop file:./backgrounds/Hive_Lite.jpg		# Custom image to load as desktop background
param defaultconfig  thinstation.conf.buildtime  	# The file with default setup.  No other config file is found
                                                 	#  during boot.

param basename       thinstation     			# Used for all config/tftp/scp file names
param basepath       .				       	# Used to determine path to tftp/scp files
#param baseurl        http://www.doncuppjr.net		# Used to determine url to wget files
#param keyfile        ./id_rsa       			# Path for private key file used for ssh/scp
#param knownhosts     ./known_hosts  			# Path for ssh known_hosts file for ssh/scp
#param localpkgs      false				# to determine is PKG files are to be loaded locally
param fulllocales    true	      			# Use full locale support for packages
#param icaencryption  false      			# Use ica encryption support, add 290k to image
param haltonerror    true				# Will halt on error, default is true
param initrdcmd	     "gzip -9"				# Compression mode and level of initrd file. none, gzip -9, lzma -9 ,bzip2 -9
param bootverbosity   63          			# Increased vebosity when booting TS
                                			#   0 no verbose messages
                                			#   1 boot
                                			#   2 network
                                			#   4 init
                                			#   8 kernel
                                			#  16 modules
                                			#  32 packages
                                			#  64 email bootlog file to SMTP server & user set in
                                		#     thinstation.conf file.  This will only work
                                			#     if networking is working.
                                			#
                                			#  Combinations can be used (e.g.12 does Kernel and Module Messages)



#!!Advanced

# Leave this alone unless you can t download (wget required on your Linux box):
#param icaurl		file://home/installs/linuxx86-12.0.0.189834.tar.gz
#param firefoxurl	http://thinstation.org/download/firefox/firefox-12.x-current.tar.bz2
#param firefox_lowmemurl	http://thinstation.org/download/firefox/firefox-3.x-current.tar.bz2
#param flashurl		http://www.thinstation.org/download/flash/install_flash_player_11.x-current.tar.gz
#param flash_lowmemurl	http://www.thinstation.org/download/flash/install_flash_player_9_linux.tar.gz
#param thinlincurl	http://www.cendio.com/downloads/clients/tl-latest-client-thinstation.tar.gz
#param nxurl		http://thinstation.org/download/nx/nxclient-3.x-current.i386.tar.gz
#param 2xurl		http://www.2x.com/downloads/AppServer-LoadBalancer/2XClient.tar.bz2
#param javaurl		http://javadl.sun.com/webapps/download/AutoDL?BundleId=49015
#param tarantellaurl	file://home/installs/tnci3li.tar
#param chromeurl		http://dl.google.com/linux/direct/google-chrome-stable_current_i386.deb
#param chromeurl 	http://media.codeweavers.com/pub/crossover/chromium/cxchromium_0.9.0-1_i386.deb
#param eGalaxurl         http://210.64.17.162/web20/drivers/touch_driver/Linux/20120202/eGalaxTouch-3.07.6014-32b-k26.tar.gz
#param httpproxy	http://192.168.1.2:8080
#param bootfssize     50%                               # Modify the size of the tmpfs filesystem
#param livecd		true		# Adds a multi-resolution boot menu to cd images.
#package alltimezone
#package allres				# Includes a lot of resolution splash images for live-cd s
#package allfirmware			# Includes a lot of firmwares for live-cd s

AUDIO_LEVEL=90
MIC_LEVEL=10
#X_DPI=100
USE_XRANDR=TRUE
#XRANDR_OPTIONS="-s 1680x1050"
#MEMORY_CONSTRAINED="TRUE"
SESSION_0_TYPE=icewm
ICEWM_THEME=blueCrux
SESSION_0_AUTOSTART=on
SESSION_1_TYPE=rdesktopsvn
SESSION_1_TITLE="ОШИБКА. Не найдены файлы конфигурации."
#SESSION_1_RDESKTOP_SERVER=192.168.1.200
#SESSION_1_RDESKTOP_OPTIONS="-u ''"
SESSION_1_AUTOSTART=off
RDESKTOP_RAW_KEYBOARD=ON
#SESSION_1_TYPE=chrome
#SESSION_1_AUTOSTART=off
#SESSION_1_FIREFOX_HOMEPAGE=http://www.doncuppjr.net/projects
#SESSION_1_CHROME_HOMEPAGE=http://www.doncuppjr.net/projects
#SERVER=192.168.5.2
#MENU_SHOWRES=off
#MENU_SHOWAPPS=off
#MENU_SHOWABOUT=off
#MENU_SHOWLOGOUT=off
#HIDE_CONTROLS=on
#SCREEN_BLANK_TIME=0
#SCREEN_STANDBY_TIME=0
#SCREEN_SUSPEND_TIME=0
#SCREEN_OFF_TIME=0
SCREEN_HORIZSYNC="30-70 | *"
#DONT_VT_SWITCH_STATE=TRUE
#DONT_ZAP_STATE=TRUE
#ALWAYS_ENTER_SERVER=TRUE
#FASTBOOT_URL=http://192.168.21.51
NET_USE=BOTH
NET_USE_DHCP=on
NET_HOSTNAME=ts_*
NET_FILE_ENABLED=On
NET_TELNETD_ENABLED=On
#DEBUGPAUSE=TRUE
#EGALAX_DEVICE=/dev/ttyS1
#EGALAX_DEVICE=usbauto
#EGALAX_PARAMFILE=/boot/eeti.param
#RECONNECT_PROMPT=AUTO
TIME_ZONE="Europe/Yekaterinburg"
#NET_TIME_SERVER=192.168.21.197
#NET_REMOTE_ACCESS_FROM="192.168.21.8"
#X_DRIVER_OPTION1="HWcursor False"
X_DRIVER_OPTION1="swcursor On"
#X_DRIVER_OPTION2="PanelSize 1024x600"
XKEYBOARD="ru,us"
XKBVARIANT="winkeys,"
XKBOPTIONS="grp:alt_shift_toggle,grp_led:scroll"
#WIRELESS_ESSID="NeonNet"
#WIRELESS_MODE="managed"
#WIRELESS_WPAKEY="1234567899999"
#WIRELESS_DRIVER="wext"
#TFTP_BLOCKSIZE=8192
TFTP_BLOCKSIZE=1024
#BIND_MOUNT0="home:/root"
#BIND_MOUNT1="boot:/boot"
#BIND_MOUNT2="tsdev:/thinstation"
USB_STORAGE_SYNC=on
LOCALE=ru_RU

#################################### 
# Network 
#################################### 
NET_USE=LAN 
NET_USE_DHCP=off 
NET_IP_ADDRESS=192.168.1.210 
NET_MASK=255.255.255.0 
NET_GATEWAY=192.168.1.1 
NET_HOSTNAME=ts_* 
NET_FILE_ENABLED=On 
NET_FILE_METHOD=tftp 
NET_TELNETD_ENABLED=Off 
 
#################################### 
# X Related 
####################################  
X_DRIVER_OPTION1="HWcursor True" 
X_DRIVER_OPTION1="swcursor Off" 
 
#################################### 
# Sessions 
#################################### 
SESSION_0_TYPE=ICEWM 
SESSION_0_AUTOSTART=on 
ICONMODE=MANUAL 
 
SESSION_1_TYPE=rdesktop 
#SESSION_1_SCREEN=0 
SESSION_1_RDESKTOP_SERVER=192.168.1.200:3389 
SESSION_1_RDESKTOP_OPTIONS="-e -a 16 -k ru -x m -5" 
SESSION_1_AUTOSTART=on 
 
SESSION_2_TYPE=ssh 
SESSION_2_AUTOSTART=off