|
Добро пожаловать,
Гость
|
Отключите пожалуйста ADblock, если включен...
ТЕМА: 2x client
2x client 03 Дек 2015 17:31 #3196
|
День добрый всем. Решил я тут попробовать новые версии TS 5.3 и 5.4 и вот что заметил.. 2х client собранный в этих конструкторе не работает ссылаясь на неверный параметр -s . подгружаю 2x.pkg старой версии и всё ок. пытался по разному ему расписывать конфиги иногда ссылается на какие то ошибки в QT. кто то еще сталкивался с подобным? похоже на то что новые версии клиента не совсем валидны для TS . либо требуют каких то еще зависимостей.
Ну и что бы темы не плодить плодить подскажите пожалуйста как добавить либу "libxinerama.so.1" в образ? |
|
Последнее редактирование: 03 Дек 2015 17:35 от DimonW.
Администратор запретил публиковать записи гостям.
|
2x client 03 Дек 2015 17:55 #3199
|
SCREEN=0
WORKSPACE=1 AUTOSTART=On #PKG_PACKAGES="rdesktop 2x" #PKG_PREFIX=pkg SESSION_0_TITLE="2X" SESSION_0_TYPE=2X SESSION_0_2X_OPTIONS="-m MX -C -u test -d test -s 192.168.1.10" KEYBOARD_MAP=en_us TIME_ZONE="Europe/Moscow" USB_ENABLED=On CUSTOM_CONFIG=off DONT_VT_SWITCH_STATE=FALSE SCREEN_RESOLUTION="1920x1080" X_DRIVER_NAME="intel" #X_DRIVER_OPTION1="swcursor On" В таком варианте пишет "No such signal QDBusAbstractInterface::DeviceRemoved(QDBusObjectPath) (receiver name: QT-subapplication) segmentation fault" SESSION_0_AUTOSTART=On SESSION_0_TYPE=2X SESSION_0_2X_MODE=MS SESSION_0_2X_USER=test SESSION_0_2X_PASSWORD=test SESSION_0_2X_SERVER=192.168.1.1 SESSION_0_2X_PORT=3389 SESSION_0_2X_FULL_SCREEN=Yes В таком случае ругается на параметр -s но если писать SESSION_0_2X_OPTIONS="-s 192.168.1.1" то пишет что ошибка в conf в каком то варианте получалось что на черном фоне просто отрывалась программа пустая без записей и предлагала ввести сервера RAS.. добавляем сервер ручками нажимаем подключиться. статус меняется на подключен, на экране без изменений. но если подгрузить старую версию 2х то верхний конфиг отрабатывай на ура, нижний не проверял. |
|
Последнее редактирование: 03 Дек 2015 18:05 от DimonW.
Администратор запретил публиковать записи гостям.
|
2x client 03 Дек 2015 18:08 #3200
|
Как я уже писал - попробуйте запустить 2х ручками, поедет или нет, ну и посмотрите в файлик thinstation/build/packages/2x/bin/2x, может разберётесь с конфигом.
|
|
Нужна индивидуальная помощь - обращайтесь shweew[кобель]it-advisor.ru
Реквизиты для материальной поддержки проекта =>
Администратор запретил публиковать записи гостям.
|
2x client 03 Дек 2015 18:11 #3201
|
Сравните thinstation/build/packages/2x/bin/2x с работающим, или подменить попробуйте.
|
|
Нужна индивидуальная помощь - обращайтесь shweew[кобель]it-advisor.ru
Реквизиты для материальной поддержки проекта =>
Администратор запретил публиковать записи гостям.
|
2x client 03 Дек 2015 18:20 #3202
|
admin пишет:
Сравните thinstation/build/packages/2x/bin/2x с работающим, или подменить попробуйте. \вся проблема в том что у меня из старых остался только готовый PKG. похожая проблема и с rdesktop. старые версии работают на ура, новые сыпятся. но на счет rdesktop особой любви не питаю, так как он по моему до сих пор не научился ридиректить микрофон. на эту тему пока смотрю на freerdp. но не совсем нравится что какие то щелчки. нашел #SESSION_0_FREERDP_SOUND_OLDWIN=ON но еще не пробовал. сча попробую запустить 2х как вы сказали |
|
Администратор запретил публиковать записи гостям.
|
2x client 03 Дек 2015 18:24 #3203
|
А что Вам мешает распаковать pkg? Смените ему расширение на tar.gz и делайте что хотите.
|
|
Нужна индивидуальная помощь - обращайтесь shweew[кобель]it-advisor.ru
Реквизиты для материальной поддержки проекта =>
Последнее редактирование: 03 Дек 2015 18:24 от admin.
Администратор запретил публиковать записи гостям.
|
2x client 03 Дек 2015 18:27 #3204
|
честно сказать даже не подозревал что так можно. вы мне прям антарктиду открыли.
 попробую, отпишусь. 2x/bin/2x абсолютно ничем не отличается  |
|
Последнее редактирование: 03 Дек 2015 18:30 от DimonW.
Администратор запретил публиковать записи гостям.
|
2x client 03 Дек 2015 18:31 #3205
|
Вот на всякий случай опции.
|
|
Нужна индивидуальная помощь - обращайтесь shweew[кобель]it-advisor.ru
Реквизиты для материальной поддержки проекта =>
Последнее редактирование: 03 Дек 2015 18:31 от admin.
Администратор запретил публиковать записи гостям.
Спасибо сказали: DimonW
|
2x client 03 Дек 2015 20:25 #3208
|
Посмотрите здесь, может не Вы один такой.
|
|
Нужна индивидуальная помощь - обращайтесь shweew[кобель]it-advisor.ru
Реквизиты для материальной поддержки проекта =>
Последнее редактирование: 03 Дек 2015 20:25 от admin.
Администратор запретил публиковать записи гостям.
|
2x client 15 Дек 2015 23:56 #3216
|
как оказалось проблема не в самих клиента (2х и freerdp) а из-за Xorg
2x ВНИМАНИЕ: Спойлер! [ Нажмите, чтобы развернуть ][ Нажмите, чтобы скрыть ] AUTOSTART=ON
SCREEN=0
WORKSPACE=1
AUTOSTART=ON
SESSION_0_TITLE=”2X”
SESSION_0_TYPE=2X
SESSION_0_2X_OPTIONS="-m MF -C -u support -d clinic -s 192.168.1.92"
X_DRIVER_NAME=intel
KEYBOARD_MAP=en_us
#SCREEN_RESOLUTION="1920x1080"
XRANDR_OPTIONS="--output HDMI --auto"Аналогичный для Freerdp с 2Х появляется окно reconnect yes/no а в freerdp окно с вводом login / pass ну и в обоих вариантах если ввести данные то ничего не работает. (хотя не понятно почему он спрашивает данные конда они есть в конфиге) с Vesa вообще вываливается на ошибку что проблемы с Xorg. Мат/плата MSI h81ti большое ощущение что Xorg не может запуститься на hdmi. |
|
Последнее редактирование: 15 Дек 2015 23:58 от DimonW.
Администратор запретил публиковать записи гостям.
|
2x client 16 Дек 2015 09:38 #3217
|
Посмотрите в /var/log на клиенте что Xorg пишет, будет понятнее.
|
|
Нужна индивидуальная помощь - обращайтесь shweew[кобель]it-advisor.ru
Реквизиты для материальной поддержки проекта =>
Администратор запретил публиковать записи гостям.
|
2x client 16 Дек 2015 11:35 #3218
|
ВНИМАНИЕ: Спойлер! [ Нажмите, чтобы развернуть ][ Нажмите, чтобы скрыть ] [ 12.282]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 12.282] X Protocol Version 11, Revision 0
[ 12.282] Build Operating System: ThinStation Thinstation
[ 12.282] Current Operating System: Linux call-07 3.18.22TS_SMP #1 SMP PREEMPT Thu Oct 8 16:18:46 UTC 2015 i686
[ 12.282] Kernel command line: usbhid.quirks=0x1bfd:0x3050:0x40 BOOT_IMAGE=::/boot/vmlinuz initrd=::/boot/initrd splash=silent,theme:default load_ramdisk=1 ramdisk_blocksize=4096 root=/dev/ram0 ramdisk_size=786432 console=tty1 vt.global_cursor_default=0 quiet loglevel=3 LM=3
[ 12.282] Build Date: 31 March 2015 01:22:27AM
[ 12.282] Donald A. Cupp Jr.
[ 12.282] Current version of pixman: 0.32.6
[ 12.282] Before reporting problems, check http://www.thinstation.org
to make sure that you have the latest version.
[ 12.282] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12.282] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 16 10:33:08 2015
[ 12.282] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 12.282] (==) No Layout section. Using the first Screen section.
[ 12.282] (==) No screen section available. Using defaults.
[ 12.282] (**) |-->Screen "Default Screen Section" (0)
[ 12.282] (**) | |-->Monitor "<default monitor>"
[ 12.282] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 12.282] (**) | |-->Device "Card0"
[ 12.282] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 12.282] (**) Option "IgnoreABI" "true"
[ 12.282] (**) Option "AutoAddDevices" "true"
[ 12.282] (**) Option "AutoEnableDevices" "true"
[ 12.282] (**) Ignoring ABI Version
[ 12.282] (**) Automatically adding devices
[ 12.282] (**) Automatically enabling devices
[ 12.282] (==) Automatically adding GPU devices
[ 12.283] (WW) The directory "/usr/share/fonts/X11/OTF/" does not exist.
[ 12.283] Entry deleted from font path.
[ 12.283] (WW) The directory "/usr/share/fonts/X11/Type1/" does not exist.
[ 12.283] Entry deleted from font path.
[ 12.283] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 12.283] Entry deleted from font path.
[ 12.283] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 12.283] Entry deleted from font path.
[ 12.283] (==) FontPath set to:
/usr/share/fonts/X11/misc/,
/usr/share/fonts/X11/TTF/
[ 12.283] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 12.283] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 12.283] (II) Loader magic: 0x82635e0
[ 12.283] (II) Module ABI versions:
[ 12.283] X.Org ANSI C Emulation: 0.4
[ 12.283] X.Org Video Driver: 19.0
[ 12.283] X.Org XInput driver : 21.0
[ 12.283] X.Org Server Extension : 9.0
[ 12.283] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 12.284] (--) PCI:*(0:0:2:0) 8086:0402:1462:7799 rev 6, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 12.284] (II) Open ACPI successful (/var/run/acpid.socket)
[ 12.284] (II) LoadModule: "glx"
[ 12.284] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 12.294] (II) Module glx: vendor="X.Org Foundation"
[ 12.294] compiled for 1.17.1, module version = 1.0.0
[ 12.294] ABI class: X.Org Server Extension, version 9.0
[ 12.294] (==) AIGLX enabled
[ 12.294] (II) LoadModule: "intel"
[ 12.294] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 12.299] (II) Module intel: vendor="X.Org Foundation"
[ 12.299] compiled for 1.17.1, module version = 2.99.917
[ 12.299] Module class: X.Org Video Driver
[ 12.299] ABI class: X.Org Video Driver, version 19.0
[ 12.299] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 12.299] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 12.299] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 12.299] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 12.299] (++) using VT number 5
[ 12.306] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140905
[ 12.308] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 12.308] (--) intel(0): CPU: x86, sse2, sse3, ssse3, sse4.1, sse4.2
[ 12.308] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 12.308] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 12.308] (==) intel(0): RGB weight 888
[ 12.308] (==) intel(0): Default visual is TrueColor
[ 12.308] (II) intel(0): Output VGA1 has no monitor section
[ 12.308] (II) intel(0): Enabled output VGA1
[ 12.308] (II) intel(0): Output HDMI1 has no monitor section
[ 12.308] (II) intel(0): Enabled output HDMI1
[ 12.308] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 12.308] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 12.308] (II) intel(0): Enabled output VIRTUAL1
[ 12.308] (--) intel(0): Output HDMI1 using initial mode 1920x1080 on pipe 0
[ 12.308] (==) intel(0): TearFree disabled
[ 12.308] (==) intel(0): DPI set to (96, 96)
[ 12.308] (II) Loading sub module "dri2"
[ 12.308] (II) LoadModule: "dri2"
[ 12.308] (II) Module "dri2" already built-in
[ 12.308] (II) Loading sub module "present"
[ 12.308] (II) LoadModule: "present"
[ 12.308] (II) Module "present" already built-in
[ 12.308] (==) Depth 24 pixmap format is 32 bpp
[ 12.316] (II) intel(0): SNA initialized with Haswell (gen7.5, gt1) backend
[ 12.316] (==) intel(0): Backing store enabled
[ 12.316] (==) intel(0): Silken mouse enabled
[ 12.316] (II) intel(0): HW Cursor enabled
[ 12.316] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 12.316] (==) intel(0): DPMS enabled
[ 12.316] (==) intel(0): display hotplug detection enabled
[ 12.316] (II) intel(0): [DRI2] Setup complete
[ 12.316] (II) intel(0): [DRI2] DRI driver: i965
[ 12.316] (II) intel(0): [DRI2] VDPAU driver: i965
[ 12.316] (II) intel(0): direct rendering: DRI2 enabled
[ 12.316] (II) intel(0): hardware support for Present enabled
[ 12.316] (--) RandR disabled
[ 12.370] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 12.370] (II) AIGLX: enabled GLX_ARB_create_context
[ 12.370] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 12.370] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 12.370] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 12.370] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 12.370] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 12.370] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 12.370] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 12.370] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 12.370] (II) AIGLX: Loaded and initialized i965
[ 12.370] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 12.372] (II) intel(0): switch to mode 1920x1080@60.0 on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 12.385] (II) intel(0): Setting screen physical size to 507 x 285
[ 12.417] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 12.418] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 12.418] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 12.418] (II) LoadModule: "evdev"
[ 12.418] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 12.420] (II) Module evdev: vendor="X.Org Foundation"
[ 12.420] compiled for 1.17.1, module version = 2.9.2
[ 12.420] Module class: X.Org XInput Driver
[ 12.420] ABI class: X.Org XInput driver, version 21.0
[ 12.420] (II) Using input driver 'evdev' for 'Power Button'
[ 12.420] (**) Power Button: always reports core events
[ 12.420] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 12.421] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 12.421] (--) evdev: Power Button: Found keys
[ 12.421] (II) evdev: Power Button: Configuring as keyboard
[ 12.421] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 12.421] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 12.421] (**) Option "xkb_rules" "evdev"
[ 12.421] (**) Option "xkb_model" "pc104"
[ 12.421] (**) Option "xkb_layout" "ru,us"
[ 12.436] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 12.436] (**) Video Bus: Applying InputClass "Keyboard Defaults"
[ 12.436] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 12.436] (II) Using input driver 'evdev' for 'Video Bus'
[ 12.436] (**) Video Bus: always reports core events
[ 12.436] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 12.436] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 12.436] (--) evdev: Video Bus: Found keys
[ 12.436] (II) evdev: Video Bus: Configuring as keyboard
[ 12.436] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event5"
[ 12.436] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 12.436] (**) Option "xkb_rules" "evdev"
[ 12.436] (**) Option "xkb_model" "pc104"
[ 12.436] (**) Option "xkb_layout" "ru,us"
[ 12.437] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 12.437] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 12.437] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 12.437] (II) Using input driver 'evdev' for 'Power Button'
[ 12.437] (**) Power Button: always reports core events
[ 12.437] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 12.437] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 12.437] (--) evdev: Power Button: Found keys
[ 12.437] (II) evdev: Power Button: Configuring as keyboard
[ 12.437] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 12.437] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 12.437] (**) Option "xkb_rules" "evdev"
[ 12.437] (**) Option "xkb_model" "pc104"
[ 12.437] (**) Option "xkb_layout" "ru,us"
[ 12.437] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event7)
[ 12.437] (II) No input driver specified, ignoring this device.
[ 12.437] (II) This device may have been added with another device file.
[ 12.437] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event8)
[ 12.437] (II) No input driver specified, ignoring this device.
[ 12.437] (II) This device may have been added with another device file.
[ 12.437] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event6)
[ 12.437] (II) No input driver specified, ignoring this device.
[ 12.437] (II) This device may have been added with another device file.
[ 12.437] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event2)
[ 12.437] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "Keyboard Defaults"
[ 12.437] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "evdev keyboard catchall"
[ 12.437] (II) Using input driver 'evdev' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[ 12.437] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[ 12.437] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Device: "/dev/input/event2"
[ 12.437] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Vendor 0x45e Product 0x745
[ 12.437] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Found keys
[ 12.437] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Configuring as keyboard
[ 12.437] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:045E:0745.0001/input/input4/event2"
[ 12.437] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: KEYBOARD, id 9)
[ 12.437] (**) Option "xkb_rules" "evdev"
[ 12.437] (**) Option "xkb_model" "pc104"
[ 12.437] (**) Option "xkb_layout" "ru,us"
[ 12.438] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event3)
[ 12.438] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "Keyboard Defaults"
[ 12.438] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "evdev pointer catchall"
[ 12.438] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "evdev keyboard catchall"
[ 12.438] (II) Using input driver 'evdev' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[ 12.438] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[ 12.438] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Device: "/dev/input/event3"
[ 12.438] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Vendor 0x45e Product 0x745
[ 12.438] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Found 9 mouse buttons
[ 12.438] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Found scroll wheel(s)
[ 12.438] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Found relative axes
[ 12.438] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Found x and y relative axes
[ 12.438] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Found absolute axes
[ 12.438] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Forcing absolute x/y axes to exist.
[ 12.438] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Found keys
[ 12.438] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Configuring as mouse
[ 12.438] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Configuring as keyboard
[ 12.438] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Adding scrollwheel support
[ 12.438] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: YAxisMapping: buttons 4 and 5
[ 12.438] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12.438] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:045E:0745.0002/input/input5/event3"
[ 12.438] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: KEYBOARD, id 10)
[ 12.438] (**) Option "xkb_rules" "evdev"
[ 12.438] (**) Option "xkb_model" "pc104"
[ 12.438] (**) Option "xkb_layout" "ru,us"
[ 12.438] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: initialized for relative axes.
[ 12.438] (WW) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: ignoring absolute axes.
[ 12.438] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) keeping acceleration scheme 1
[ 12.438] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration profile 0
[ 12.438] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration factor: 2.000
[ 12.438] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration threshold: 4
[ 12.438] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/mouse0)
[ 12.438] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "Keyboard Defaults"
[ 12.438] (II) No input driver specified, ignoring this device.
[ 12.438] (II) This device may have been added with another device file.
[ 12.439] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event4)
[ 12.439] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "Keyboard Defaults"
[ 12.439] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "evdev keyboard catchall"
[ 12.439] (II) Using input driver 'evdev' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[ 12.439] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[ 12.439] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Device: "/dev/input/event4"
[ 12.439] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Vendor 0x45e Product 0x745
[ 12.439] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Found 1 mouse buttons
[ 12.439] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Found scroll wheel(s)
[ 12.439] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Found relative axes
[ 12.439] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Found absolute axes
[ 12.439] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Found absolute multitouch axes
[ 12.439] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Found x and y absolute axes
[ 12.439] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Found keys
[ 12.439] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Forcing relative x/y axes to exist.
[ 12.439] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Configuring as mouse
[ 12.439] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Configuring as keyboard
[ 12.439] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: Adding scrollwheel support
[ 12.439] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: YAxisMapping: buttons 4 and 5
[ 12.439] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12.439] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.2/0003:045E:0745.0003/input/input6/event4"
[ 12.439] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: KEYBOARD, id 11)
[ 12.439] (**) Option "xkb_rules" "evdev"
[ 12.439] (**) Option "xkb_model" "pc104"
[ 12.439] (**) Option "xkb_layout" "ru,us"
[ 12.439] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: initialized for relative axes.
[ 12.439] (WW) evdev: Microsoft Microsoft® 2.4GHz Transceiver v8.0: ignoring absolute axes.
[ 12.439] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) keeping acceleration scheme 1
[ 12.439] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration profile 0
[ 12.439] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration factor: 2.000
[ 12.439] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration threshold: 4
[ 12.439] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event9)
[ 12.439] (II) No input driver specified, ignoring this device.
[ 12.439] (II) This device may have been added with another device file.
[ 12.439] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event10)
[ 12.439] (II) No input driver specified, ignoring this device.
[ 12.439] (II) This device may have been added with another device file.
[ 12.439] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event11)
[ 12.439] (II) No input driver specified, ignoring this device.
[ 12.439] (II) This device may have been added with another device file.
[ 12.440] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event12)
[ 12.440] (II) No input driver specified, ignoring this device.
[ 12.440] (II) This device may have been added with another device file.
[ 15.422] (II) AIGLX: Suspending AIGLX clients for VT switch |
|
Администратор запретил публиковать записи гостям.
|
2x client 16 Дек 2015 11:52 #3219
|
Да вроде всё хорошо с Xorg, а сеть у Вас есть?
Попробуйте прописать весь конфиг в thinstation.conf.buildtime, если сработает - в build.conf включить ts-classic и выключить networkmanager, в thinstation.conf.buildtime прописать NET_FILE_ALTERNATE=IP.вашего.tftp.сервера и вернуть конфиги в thinstation.conf.network. |
|
Нужна индивидуальная помощь - обращайтесь shweew[кобель]it-advisor.ru
Реквизиты для материальной поддержки проекта =>
Последнее редактирование: 16 Дек 2015 12:00 от admin.
Администратор запретил публиковать записи гостям.
|
2x client 16 Дек 2015 11:59 #3220
|
ВНИМАНИЕ: Спойлер! [ Нажмите, чтобы развернуть ][ Нажмите, чтобы скрыть ]
#!!Filesystem Support
# Every mounted device needs a filesystem, so choose which ones you need.
module usb-storage
#module autofs4 # Automount and autofs support
module isofs # ISO9960 file system support for CDRoms
module udf # CDRom UDF file system support
module vfat # Fat and VFat file system support
#module ntfs # NTFS file system support
#module ext2 # Ext2 file system support
#module ext3 # Ext3 file system support
module ext4 # Ext4 file system support
#module nfs # NFS file system support
#module cifs # CIFS support (use either this or smbfs - not both)
#################################################
### --- Packages to include in boot image --- ###
#################################################
# A package is a program or utility.
# Any packages may be added as "package" or "pkg".
# If defined as a "package", the program is included in the boot image.
# If defined as a "pkg", the program is added from outside the image.
# Normally, you should use "package". Only use "pkg" if you want to
# dynamically load programs.
# --- Packages to include in boot image
# --- Packages below may be "package" or "pkg"
#!!Miscellaneous
package aufs # This is needed in order for squashfs compression mode to work.
package ts-classic # The classic ts logic for network/netfiles/hostname/mounting/telnetd/telnet/playcd
#package automount
package udisks
#package networkmanager
#package udisks-glue
package ntp # Utility to obtain date & time from network
#package sound-esd # Enable sound-esd or sound-nasd if you want to be able to control
#package sound-nasd # sound on your thin client from another computer or
# your remote session.
package alsa
package gnome-media
#package gnome-network-properties
package gnome-core
package volumeicon
#package kismet
package gst-plugins-base
package gst-plugins-good
#package crystalhd
#package libva
#package iptables # IP Tables support
package cpufreq
#package cpuspeed
#package wine # Windows Application Execution Platform
#!!X related
# --- XOrg 7.7
#package xorg7-v4l
package xorg7-vesa #A fallback driver that works with almost everything. Does allow resolution changes
package xorg7-vmware
package xorg7-ati #ATI video driver for most modern ATI chipsets. Usually requires several firmwares
package xorg7-nouveau #New opensource nvidia driver
#package xorg7_nvidia #Proprietary nvidia driver
#package xorg7_nvidia_64 # Additional 64bit module
#package xorg7-openchrome #Via Video Chipsets driver
package xorg7-intel #Intel video driver for most modern chipsets except the GMA3500/3600
#package xorg7-sis
package xorg7-via #Via driver for VX900 chipset, replaces the openchrome one
#!!Locale or localization files for keyboard and fonts. (Language/Country)
#package locale-cs_CZ # Czech
#package locale-da_DK # Danish
#package locale-de_DE # German
#package locale-en_GB # English-Great Britain
package locale-en_US # English-US
#package locale-es_ES # Spanish
#package locale-fi_FI # Finnish
#package locale-fr_BE # French Belgium
#package locale-fr_CA # French Canadian
#package locale-fr_CH # French Switzerland
#package locale-fr_FR # French
#package locale-hr_HR # Croation
#package locale-hu_HU # Hungarian
#package locale-it_IT # Italian
#package locale-ja_JP # Japanese
#package locale-nb_NO # Norwegian (bokmål)
#package locale-pl_PL # Polish
#package locale-pt_PT # Portuguese
#package locale-pt_BR # Portuguese-Brazil
package locale-ru_RU # Russian
#package locale-sv_SE # Swedish
#package locale-tr_TR # Turkish
#!Applications
#!!Connection Package types. Choose *at least* one!
package freerdp # X RDP Client - fork of rdesktop
package rdesktop # X RDP client for Windows Terminal Services (ver 1.7)
#package vncviewer # VNC client (vncviewer)
#package xorg7vnc # Remote Control Client Workstation
#package ica # Citrix ICA client support
#package tarantella # Tarantella client support
#package xnest # XDM in a window client
#package urxvt # Light Xterm Client (vt102)
#package xterm # Xterm Client (vt220)
#package ssh # Secure Shell client
#package tn5250 # 5250 terminal emulator
#package dillo # Dillo light web browser
#package thinlinc # Cendio ThinLinc client support
#package nx # No Machine NX client
package 2x # 2X client
#package java # Java runtime
#package firefox_lowmem # Firefox 3 for low resource machines
#package firefox # Firefox current Web Browser
package chrome # Google Chrome Web Browser
#package kiosk # Rkiosk Plugin for Firefox
#package flash_lowmem # Flash 9 browser plugin for firefox and low resource machines
#package flash # Flash Current
#package filezilla # FileZilla FTP Client for X
#package git # GIT Version Control System
#package gparted # Gnome Partition Manager
package open-vm-tools
#package medit # Notepad
#package mplayer # DVD and video player
#package vmview # VMware Open-View Client, no PCoIP
#package vmviewpcoip # VMware Open-View Client, PCOIP
#package xbmc # XBMC Media Center for X
#package evince # X PDF Viewer
package tsmon
#!!Window Managers. Choose no more than 1 window manager.
# Not needed if you don t want to manage windows.
#package openbox # A spartin clean/fast window manager.
#package xdesktop-kiosk # A locked down desktop kiosk using the openbox wm (See packages/xdesktop-kiosk/build/conf for
# more help.
#package icewm # "ICEWM" window manager. Makes TS a light workstation.
#package icewm-theme-xp
#package icewm-themes # Extra IceWM themes
#package icewm-theme-bernstein
#package icewm-theme-bluecrux
#package icewm-theme-liquid
package xfwm4
#package xfwm4-extra
package xfce4-power-manager
package terminal # Terminal emulator for xfwm4 -- Pulls in xfwm4
package thunar # File Manager for xfwm4 -- Pulls in xfwm4
#!!Window Manager Utils
#package idle-shutdown # Package that lets you specify automatic shutdown settings and logic.
#package wbar # Adds icons to desktop
#package idesk
#!!Other services
#package www # Web access to client. From a browser: "http://<IP number>"
# The standard page is for general user settings, administrative access
# is on port 6800.
#package lp_server # Remote printing daemon (JetDirect compatible)
#package lpr # LPR Print Server, for use with samba-server package
#package lprng # LPRng Print Server, supports network based printing
package cups
#package sshd # Dropbear secure shell server
#package tftpd # Built in tftpd server. Useful for making a tftpserver
# for thinstation on a WAN over a slow link.
#package samba-server # Samba server FS Support, allows you to share
# local floppy/cdrom/hd/printer to other Windows
# PCs. Needs supermount for removeable media.
#package samba-client # Samba smbclient, gives a shell like environment to access an samba server
#package hdupdate # Package for updating TS images on a hardisk over a network connection
#package scp # Add ability to download files over internet using scp. This package
# adds some networking based options for downloading configuration files or
# in using hdupdate package.
#package openvpn # OpenVPN Client Support
#!!PCSCD Card Readers
#package gemplus410 # Card reader Gemplus 410 (Serial) and Gemplus 430 (USB)
#package ccidreader # Generic USB card reader
#!!Miscellaneous
package gtk-2.0 # Full gtk-2.0 plus clearlooks theme
package icons-cursor # Anti Aliased Mouse Cursor Theme
package icons-hicolor # Hi-Color icons for some applications and themes. Does not really contain any icons.
package icons-gnome # gnome Hi-Color icons theme. Needed by most other icon themes.
#package icons-tango # tango Hi-Color icons theme
#package icons-neu # neu Hi-Color icons theme
#package fonts-misc
#package fonts-jis-misc # Japanese Industrial
#package fonts-util
#package fonts-cyrillic
#package fonts-Speedo-Bitstream
package fonts-TTF-BH # This one works nicely most of the time and is small.
package fonts-TTF-vera
#package fonts-TTF-MS # Fonts for rendering documents developed on the MS Platform.
# Might want to talk to a lawyer before using these.
package fonts-TTF-liberation
#package fonts-75dpi-Adobe
#package fonts-75dpi-Adobe-Utopia
#package fonts-75dpi-BH
#package fonts-75dpi-BH-Typewriter
#package fonts-75dpi-Bitstream
#package fonts-100dpi-Adobe
#package fonts-100dpi-Adobe-Utopia
#package fonts-100dpi-BH
#package fonts-100dpi-BH-Typewriter
#package fonts-100dpi-Bitstream
#package fonts-Type1-Adobe-Utopia
#package fonts-Type1-BH
#package fonts-Type1-Bitstream
#package fonts-Type1-IBM
#package fonts-Type1-xfree86
#package lshw # list hardware
#package e3 # Basic vi like Editor
#package rox # Basic File Manager
#package debug # metapackage to include other debugging packages and stop during bootup to check things.
#package extensions # Adds various shell commands, will increase image size.
#package extensions-x # Adds various utility s for the X Environment !!!! INCLUDES hwlister.sh !!!!
#package eGalax # eGalax TouchKit Drivers/Utility for serial and usb touchscreens by EETI.
#package installer # Wipes a drive, makes partitions and downloads thinstation from a pxe server
#package devstation # Starts a tftp server that hosts files from the boot-images/pxe folder
# Parameters
########################################
### --- Miscellaneous Parameters --- ###
########################################
#!!Basic
#param fastboot true # Mangles the filesystem a special way as to improve boot spead and reduce
# memory utilization. Cool/Dangerous . Harder to dubug other packages. (Finishing Touch)
# Set to 'true' to enable or 'lotsofmem' for slightly slower booting but no squash lag on app launch.
#param tsuser tsuser # Name of the user that thinstation will run as. Needs userauto package.
#param tsuserpasswd pleasechangeme # Do Change! Console/telnet password for non-root
param rootpasswd pleasechangeme # Do Change! Console/telnet password for root
# If this is enabled, Telnetd will be enabled.
param xorgvncpasswd pleasechangeme # VNC Access Password
param storagepasswd pleasechangeme # Password for storage server
param dialuppasswd pleasechangeme # Password for dialin account
param sambapasswd pleasechangeme # Password for samba shares when using user mode security
#param kernelcmdline "radeon.modeset=0" # Add additional kernel command lines. e.g. disable radeon framebuffer
#param stripelf yes # Strip extraneous information from elf binaries (Maybe not Safe)
#param acpisupport disable # Tells the kernel not to load acpi modules. (Breaks some Intel Chipsets if disabled)
#param uvesafb disable # Disable uvesafb (legacy option like modesetfb)
#param extra_vid LVDS-1:d # Add an extra video= parameter to kernel cmd line (good for disabling outputs on video cards)
param bootlogo true # Enable or Disable the use of the Boot splash.
param boottheme default # Backgound picture during boot
#param splash verbose # kernel splash setting (0=off, silent or verbose (default=silent)
param splash silent
param fbmtrr 0 # MTRR value for uvesafb (default = 0, 4 is the best) grep your log to make sure you have not set it to high
#param fbnocrtc true # This is usually a good thing.
param fbsm ywrap # Window scrolling method (redraw, ypan, ywrap) ywrap is best, but may not work correctly for all people
#param fbvtotal 16 # Override Video Bios Reported Memory in MB
#param fbmaxhf 67 # Override Video Negotiated Max Horizontal Frequency
#param fbmaxvf 61 # Override Video Negotiated Max Vertical Frequency
#param fbmaxclk 155 # Override Video Negotiated Max Clock Frequency
#param fbnoedid true # Don t do video edid
#param bootresolution 1024x600-32 # Resolution used during Thinstation boot.
#param bootresolution 1024x768-32 # You can wright your own resolution mode here, if you know it.
#param bootresolution 1152x864-32
param bootresolution 1280x768-32
#param bootresolution 1366x768-32 # Otherwise, you may want to refer to the vbe_modes.list you created with hwlister.sh
#param bootresolution 1280x1024-32 # for modes that your card supports.
#param bootresolution 1400x900-32 # It is also used by xrandr if no xrandr options are specified.
#param bootresolution 1680x1050-32
#param bootresolution 1920x1080-32
#param bootresolution 1400x1050-32
param desktop file:./backgrounds/Hive_Lite.jpg # Custom image to load as desktop background
param defaultconfig thinstation.conf.buildtime # The file with default setup. No other config file is found
# during boot.
param basename thinstation # Used for all config/tftp/scp file names
param basepath ./thinstation/config # Used to determine path to tftp/scp files
#param keyfile ./id_rsa # Path for private key file used for ssh/scp
#param knownhosts ./known_hosts # Path for ssh known_hosts file for ssh/scp
#param localpkgs false # to determine is PKG files are to be loaded locally
#param fulllocales true # Use full locale support for packages
#param icaencryption false # Use ica encryption support, add 290k to image
param haltonerror false # Will halt on error, default is true
param hardlinkfs true
param sametimestmp true # When enabled, the timestamps for all files and folders will be set to 00:00 of todays date in your timezone
param initrdcmd "squashfs" # Compression mode and level of initrd file. none, gzip -9, lzma -9 ,bzip2 -9
param bootverbosity 3 # Increased vebosity when booting TS
# 0 no verbose messages
# 1 boot
# 2 network
# 4 init
# 8 kernel
# 16 modules
# 32 packages
# 64 email bootlog file to SMTP server & user set in
# thinstation.conf file. This will only work
# if networking is working.
#
# Combinations can be used (e.g. 24 does Kernel and Module Messages)
#!!Advanced
# Leave this alone unless you can t download (wget required on your Linux box):
param downloads /downloads
param bootimages "iso syslinux pxe"
param syslinuxtheme "default"
#param httpproxy http://192.168.1.2:8080
#param bootfssize 50% # Modify the size of the tmpfs filesystem
package alltimezone
param allres false # Includes a lot of resolution splash images for live-cd s
param allfirmware false # Includes a lot of firmwares for live-cd s
param blacklist snd-pcsp.ko
param baseurl http:///tsmon/configsВНИМАНИЕ: Спойлер! [ Нажмите, чтобы развернуть ][ Нажмите, чтобы скрыть ] NET_USE=BOTH
NET_USE_DHCP=on
NET_HOSTNAME=ts_*
NET_FILE_METHOD=tftp
NET_FILE_ENABLED=On
NET_TELNETD_ENABLED=Off
TIME_ZONE=Europe/Moscow
NET_TIME_SERVER=us.pool.ntp.org
TFTP_BLOCKSIZE=1024
##TSMON_SERVER=http://Всё именно так и есть. Мне не совсем нравится этот момент Output HDMI1 using initial mode 1920x1080 on pipe 0 такое ощущение что он пытается включить режим мультимонитора.ВНИМАНИЕ: Спойлер! [ Нажмите, чтобы развернуть ][ Нажмите, чтобы скрыть ] Connection received from 192.168.32.102 on port 2070 [16/12 10:31:35.452] Read request for file <pxelinux.0>. Mode octet [16/12 10:31:35.452] OACK: <tsize=46909,> [16/12 10:31:35.452] Using local port 59055 [16/12 10:31:35.452] Peer returns ERROR <TFTP Aborted> -> aborting transfer [16/12 10:31:35.452] Connection received from 192.168.32.102 on port 2071 [16/12 10:31:35.452] Read request for file <pxelinux.0>. Mode octet [16/12 10:31:35.452] OACK: <blksize=1456,> [16/12 10:31:35.452] Using local port 59056 [16/12 10:31:35.452] <pxelinux.0>: sent 33 blks, 46909 bytes in 0 s. 0 blk resent [16/12 10:31:35.484] Connection received from 192.168.32.102 on port 49152 [16/12 10:31:35.538] Read request for file <ldlinux.c32>. Mode octet [16/12 10:31:35.539] OACK: <tsize=116652,blksize=1408,> [16/12 10:31:35.546] Using local port 59057 [16/12 10:31:35.546] <ldlinux.c32>: sent 83 blks, 116652 bytes in 0 s. 0 blk resent [16/12 10:31:35.585] Connection received from 192.168.32.102 on port 49153 [16/12 10:31:35.589] Read request for file <pxelinux.cfg/01-44-8a-5b-f8-e8-f4>. Mode octet [16/12 10:31:35.590] File <pxelinux.cfg\01-44-8a-5b-f8-e8-f4> : error 2 in system call CreateFile Не удается найти указанный файл. [16/12 10:31:35.591] Connection received from 192.168.32.102 on port 49154 [16/12 10:31:35.591] Read request for file <pxelinux.cfg/C0A82066>. Mode octet [16/12 10:31:35.592] File <pxelinux.cfg\C0A82066> : error 2 in system call CreateFile Не удается найти указанный файл. [16/12 10:31:35.592] Connection received from 192.168.32.102 on port 49155 [16/12 10:31:35.594] Read request for file <pxelinux.cfg/C0A8206>. Mode octet [16/12 10:31:35.594] File <pxelinux.cfg\C0A8206> : error 2 in system call CreateFile Не удается найти указанный файл. [16/12 10:31:35.594] Connection received from 192.168.32.102 on port 49156 [16/12 10:31:35.594] Read request for file <pxelinux.cfg/C0A820>. Mode octet [16/12 10:31:35.594] File <pxelinux.cfg\C0A820> : error 2 in system call CreateFile Не удается найти указанный файл. [16/12 10:31:35.594] Connection received from 192.168.32.102 on port 49157 [16/12 10:31:35.595] Read request for file <pxelinux.cfg/C0A82>. Mode octet [16/12 10:31:35.595] File <pxelinux.cfg\C0A82> : error 2 in system call CreateFile Не удается найти указанный файл. [16/12 10:31:35.595] Connection received from 192.168.32.102 on port 49158 [16/12 10:31:35.595] Read request for file <pxelinux.cfg/C0A8>. Mode octet [16/12 10:31:35.595] File <pxelinux.cfg\C0A8> : error 2 in system call CreateFile Не удается найти указанный файл. [16/12 10:31:35.595] Connection received from 192.168.32.102 on port 49159 [16/12 10:31:35.598] Read request for file <pxelinux.cfg/C0A>. Mode octet [16/12 10:31:35.598] File <pxelinux.cfg\C0A> : error 2 in system call CreateFile Не удается найти указанный файл. [16/12 10:31:35.598] Connection received from 192.168.32.102 on port 49160 [16/12 10:31:35.601] Read request for file <pxelinux.cfg/C0>. Mode octet [16/12 10:31:35.601] File <pxelinux.cfg\C0> : error 2 in system call CreateFile Не удается найти указанный файл. [16/12 10:31:35.601] Connection received from 192.168.32.102 on port 49161 [16/12 10:31:35.601] Read request for file <pxelinux.cfg/C>. Mode octet [16/12 10:31:35.601] File <pxelinux.cfg\C> : error 2 in system call CreateFile Не удается найти указанный файл. [16/12 10:31:35.601] Connection received from 192.168.32.102 on port 49162 [16/12 10:31:35.604] Read request for file <pxelinux.cfg/default>. Mode octet [16/12 10:31:35.604] OACK: <tsize=279,blksize=1408,> [16/12 10:31:35.606] Using local port 59067 [16/12 10:31:35.606] <pxelinux.cfg\default>: sent 1 blk, 279 bytes in 0 s. 0 blk resent [16/12 10:31:35.607] Connection received from 192.168.32.102 on port 49163 [16/12 10:31:35.607] Read request for file <product.txt>. Mode octet [16/12 10:31:35.607] OACK: <tsize=24,blksize=1408,> [16/12 10:31:35.612] Using local port 59068 [16/12 10:31:35.612] <product.txt>: sent 1 blk, 24 bytes in 0 s. 0 blk resent [16/12 10:31:35.616] Connection received from 192.168.32.102 on port 49164 [16/12 10:31:35.616] Read request for file </boot/vmlinuz>. Mode octet [16/12 10:31:35.616] OACK: <tsize=3582560,blksize=1408,> [16/12 10:31:35.705] Using local port 59069 [16/12 10:31:35.705] <\boot\vmlinuz>: sent 2545 blks, 3582560 bytes in 2 s. 0 blk resent [16/12 10:31:37.011] Connection received from 192.168.32.102 on port 49165 [16/12 10:31:37.011] Read request for file </boot/initrd>. Mode octet [16/12 10:31:37.012] OACK: <tsize=202362880,blksize=1408,> [16/12 10:31:37.014] Using local port 59070 [16/12 10:31:37.014] <\boot\initrd>: sent 143724 blks, 202362880 bytes in 65 s. 0 blk resent [16/12 10:32:42.379] Connection received from 192.168.32.102 on port 34125 [16/12 10:32:50.733] Read request for file <./thinstation/config/thinstation.conf.network>. Mode octet [16/12 10:32:50.733] OACK: <tsize=358,> [16/12 10:32:50.738] Using local port 56110 [16/12 10:32:50.738] <.\thinstation\config\thinstation.conf.network>: sent 1 blk, 358 bytes in 0 s. 0 blk resent [16/12 10:32:50.740] Connection received from 192.168.32.102 on port 35336 [16/12 10:32:50.758] Read request for file <./thinstation/config/thinstation.hosts>. Mode octet [16/12 10:32:50.758] OACK: <tsize=125,> [16/12 10:32:50.762] Using local port 56111 [16/12 10:32:50.762] <.\thinstation\config\thinstation.hosts>: sent 1 blk, 125 bytes in 0 s. 0 blk resent [16/12 10:32:50.763] Connection received from 192.168.32.102 on port 44237 [16/12 10:32:50.878] Read request for file <./thinstation/config/thinstation.conf.group-cal>. Mode octet [16/12 10:32:50.878] File <.\thinstation\config\thinstation.conf.group-cal> : error 2 in system call CreateFile Не удается найти указанный файл. [16/12 10:32:50.878] Connection received from 192.168.32.102 on port 59683 [16/12 10:32:52.878] Read request for file <./thinstation/config/thinstation.conf.group-call>. Mode octet [16/12 10:32:52.878] File <.\thinstation\config\thinstation.conf.group-call> : error 2 in system call CreateFile Не удается найти указанный файл. [16/12 10:32:52.878] Connection received from 192.168.32.102 on port 51726 [16/12 10:32:54.890] Read request for file <./thinstation/config/thinstation.conf-call-07>. Mode octet [16/12 10:32:54.906] OACK: <tsize=266,> [16/12 10:32:54.906] Using local port 65336 [16/12 10:32:54.906] <.\thinstation\config\thinstation.conf-call-07>: sent 1 blk, 266 bytes in 0 s. 0 blk resent [16/12 10:32:54.906] Connection received from 192.168.32.102 on port 33423 [16/12 10:32:54.965] Read request for file <./thinstation/config/ssh_known_hosts>. Mode octet [16/12 10:32:54.965] File <.\thinstation\config\ssh_known_hosts> : error 2 in system call CreateFile Не удается найти указанный файл. [16/12 10:32:54.965] Connection received from 192.168.32.102 on port 33042 [16/12 10:33:41.912] Write request for file <Xorg.0.log>. Mode octet [16/12 10:33:41.912] OACK: <tsize=20272,> [16/12 10:33:41.912] Using local port 50473 [16/12 10:33:41.912] <Xorg.0.log>: rcvd 40 blks, 20272 bytes in 0 s. 0 blk resent [16/12 10:33:41.928] Все конфиги "тянутся" по этому с сетью точно все ок |
|
Последнее редактирование: 16 Дек 2015 12:02 от DimonW.
Администратор запретил публиковать записи гостям.
|
2x client 16 Дек 2015 12:16 #3224
|
Можно ещё попробовать:
# NET_FILE_ALTERNATE Alternate server for vmware or non-standard dhcp servers |
|
Нужна индивидуальная помощь - обращайтесь shweew[кобель]it-advisor.ru
Реквизиты для материальной поддержки проекта =>
Администратор запретил публиковать записи гостям.
|
2x client 16 Дек 2015 12:18 #3225
|
admin пишет:
Можно ещё попробовать: # NET_FILE_ALTERNATE Alternate server for vmware or non-standard dhcp servers У меня вопрос, а зачем? Connection received from 192.168.32.102 on port 51726 [16/12 10:32:54.890] Read request for file <./thinstation/config/thinstation.conf-call-07>. Mode octet [16/12 10:32:54.906] OACK: <tsize=266,> [16/12 10:32:54.906] что означает что он замечательно подгружает конфиг... могу также лог из /var/log/boot показать... там тоже видно что все подгружается сейчас попробую канеш с конфигом в thinstation.conf.buildtime но я думаю изменений не будет |
|
Администратор запретил публиковать записи гостям.
|
2x client 16 Дек 2015 12:22 #3226
|
DimonW пишет:
У меня вопрос, а зачем?.... Логично, незачем, но кто ж знал.DimonW пишет: сейчас попробую канеш с конфигом в thinstation.conf.buildtime но я думаю изменений не будет Скорее всего, раз конфиг грузится. |
|
Нужна индивидуальная помощь - обращайтесь shweew[кобель]it-advisor.ru
Реквизиты для материальной поддержки проекта =>
Последнее редактирование: 16 Дек 2015 12:25 от admin.
Администратор запретил публиковать записи гостям.
|
2x client 16 Дек 2015 12:38 #3227
|
log/boot
ВНИМАНИЕ: Спойлер! [ Нажмите, чтобы развернуть ][ Нажмите, чтобы скрыть ] Read a config file for eth0
Set DEVTYPE for eth0 to eth
Read a config file for lo
Set DEVTYPE for lo to lo
Read a config file for wlan0
No ESSID specified
Initializing rc2 packages...
S02profile_setup
S03rngd
S09syslogd
S11dbus
S11modules
Installing extra modules...
S14hostname
S15filesystem_network
S15network_files
Getting global configuration from (192.168.32.126)
./thinstation/config 100% |*******************************| 358 0:00:00 ETA
./thinstation/config 100% |*******************************| 358 0:00:00 ETA
Ok
./thinstation/config 100% |*******************************| 125 0:00:00 ETA
./thinstation/config 100% |*******************************| 125 0:00:00 ETA
Read a config file for eth0
Found a previous udhcpc session for eth0
udhcpc (v1.23.1) started
Sending discover...
Sending select for 192.168.32.102...
Lease of 192.168.32.102 obtained, lease time 600
Getting group configurations...
ERROR: cal not found!
ERROR: call not found!
Getting configuration for hostname call-07...
./thinstation/config 100% |*******************************| 266 0:00:00 ETA
./thinstation/config 100% |*******************************| 266 0:00:00 ETA
Ok
tftp: server error: (1) File not found
S16pkg
S17profile_setup
S20session
S25ntpd
crontab: can't open 'root': No such file or directory
S25playcd
S25sh
S25smtp
S25telnetd
S31console-keymap
Extended locale support enabled
Loading /lib/kbd/keymaps/ru.map.gz
Loading console font: default8x16.psfu.gz
S32audio
alsactl: sysfs_init:48: sysfs path '/sys' is invalid
Found hardware: "HDA-Intel" "Intel Haswell HDMI" "HDA:80862807,80860101,00100000" "0x1462" "0x7799"
Hardware is initialized using a generic method
S35autofs
Starting automounter: loading autofs4 kernel module, done.
S40cpufreq
S45acpi
S80crond
S81cups
Initializing rc5 packages...
S102x.init
S10chrome.init
S10open-vm-tools
Not starting as we're not running in a vm.
S10samba-base
S10sshd.init
S10xconf
S15x11vnc.init
S20pcscd
S25xinetd
S50gnome-core.init
S60tsmon
wget: bad address ''
grep: /tmp/tsmon: No such file or directory
S80session-setup
S85freerdp.init
Object::connect: No such signal QDBusAbstractInterface::DeviceRemoved(QDBusObjectPath)
Object::connect: (receiver name: 'Qt-subapplication')
Segmentation fault
Object::connect: No such signal QDBusAbstractInterface::DeviceRemoved(QDBusObjectPath)
Object::connect: (receiver name: 'Qt-subapplication')
Segmentation fault
Object::connect: No such signal QDBusAbstractInterface::DeviceRemoved(QDBusObjectPath)
Object::connect: (receiver name: 'Qt-subapplication')
Segmentation fault
Object::connect: No such signal QDBusAbstractInterface::DeviceRemoved(QDBusObjectPath)
Object::connect: (receiver name: 'Qt-subapplication')
Segmentation faultвот так это выглядит попробовал с конфигом в thinstation.conf.buildtime, без изменений. будут еще варианты? мне кажется что дело все же с настройками Xorg, но я честно не знаю что писать И как настраивать 
Это сообщение содержит прикрепленные изображения.
|
|
Последнее редактирование: 16 Дек 2015 12:44 от DimonW.
Администратор запретил публиковать записи гостям.
|
2x client 16 Дек 2015 12:52 #3228
|
С Xorg нормально, окошко то с реконнектом отображается.
Для эксперимента: Раскомментируйте в build.conf пакет xterm, в thinstation.conf.buildtime пропишите SESSION_0_TYPE=xterm
SESSION_0_AUTOSTART=On |
|
Нужна индивидуальная помощь - обращайтесь shweew[кобель]it-advisor.ru
Реквизиты для материальной поддержки проекта =>
Последнее редактирование: 16 Дек 2015 12:54 от admin.
Администратор запретил публиковать записи гостям.
|
2x client 16 Дек 2015 16:13 #3229
|
С сетью точно все хорошо, через xterm xfreerdp /V:srv работает, в чем тогда может быть проблема?
|
|
Администратор запретил публиковать записи гостям.
|