[ 16.337] Build Date: 02 June 2016 03:08:29AM
[ 16.337] Donald A. Cupp Jr.
[ 16.337] Current version of pixman: 0.34.0
[ 16.337] Before reporting problems, check www.thinstation.org
to make sure that you have the latest version.
[ 16.337] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 16.337] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 21 18:55:49 2017
[ 16.338] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 16.338] (==) No Layout section. Using the first Screen section.
[ 16.338] (**) |-->Screen "Screen0" (0)
[ 16.338] (**) | |-->Monitor "<default monitor>"
[ 16.339] (**) | |-->Device "Card0"
[ 16.339] (==) No monitor specified for screen "Screen0".
Using a default monitor configuration.
[ 16.339] (**) Option "IgnoreABI" "true"
[ 16.339] (**) Option "AutoAddDevices" "true"
[ 16.339] (**) Option "AutoEnableDevices" "true"
[ 16.339] (**) Ignoring ABI Version
[ 16.339] (**) Automatically adding devices
[ 16.339] (**) Automatically enabling devices
[ 16.339] (==) Automatically adding GPU devices
[ 16.339] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 16.340] (WW) The directory "/usr/share/fonts/X11/OTF/" does not exist.
[ 16.340] Entry deleted from font path.
[ 16.340] (WW) The directory "/usr/share/fonts/X11/Type1/" does not exist.
[ 16.340] Entry deleted from font path.
[ 16.340] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 16.340] Entry deleted from font path.
[ 16.340] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 16.340] Entry deleted from font path.
[ 16.340] (==) FontPath set to:
/usr/share/fonts/X11/misc/,
/usr/share/fonts/X11/TTF/
[ 16.340] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 16.340] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 16.340] (II) Loader magic: 0x827cb20
[ 16.340] (II) Module ABI versions:
[ 16.340] X.Org ANSI C Emulation: 0.4
[ 16.340] X.Org Video Driver: 20.0
[ 16.340] X.Org XInput driver : 22.1
[ 16.340] X.Org Server Extension : 9.0
[ 16.343] (--) PCI:*(0:0:2:0) 8086:a001:8086:a001 rev 2, Mem @ 0xfe980000/524288, 0xd0000000/268435456, 0xfe800000/1048576, I/O @ 0x0000cc00/8, BIOS @ 0x????????/131072
[ 16.343] (--) PCI: (0:0:2:1) 8086:a002:8086:a001 rev 2, Mem @ 0xfe780000/524288
[ 16.343] (II) Open ACPI successful (/var/run/acpid.socket)
[ 16.343] (II) LoadModule: "glx"
[ 16.345] (WW) Warning, couldn't open module glx
[ 16.345] (II) UnloadModule: "glx"
[ 16.345] (II) Unloading glx
[ 16.345] (EE) Failed to load module "glx" (module does not exist, 0)
[ 16.345] (II) LoadModule: "intel"
[ 16.345] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 16.361] (II) Module intel: vendor="X.Org Foundation"
[ 16.361] compiled for 1.18.3, module version = 2.99.917
[ 16.361] Module class: X.Org Video Driver
[ 16.361] ABI class: X.Org Video Driver, version 20.0
[ 16.361] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 16.362] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 16.362] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 16.362] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 16.362] (++) using VT number 5

[ 18.392] intel: waited 2020 ms for i915.ko driver to load
[ 18.394] (EE) No devices detected.
[ 18.394] (EE)
Fatal server error:
[ 18.394] (EE) no screens found(EE)
[ 18.394] (EE)

[ 10.112]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 10.112] X Protocol Version 11, Revision 0
[ 10.112] Build Operating System: ThinStation Thinstation
[ 10.112] Current Operating System: Linux ts_80ee732bccd2 4.1.1TS_SMP #1 SMP PREEMPT Sun Jul 5 21:14:08 UTC 2015 i686
[ 10.112] Kernel command line: usbhid.quirks=0x1bfd:0x3050:0x40 BOOT_IMAGE=it/vmlinuz initrd=it/initrd splash=silent,theme:default load_ramdisk=1 ramdisk_blocksize=4096 root=/dev/ram0 ramdisk_size=986432 console=tty1 vt.global_cursor_default=0 quiet loglevel=3 LM=3
[ 10.112] Build Date: 31 March 2015 01:22:27AM
[ 10.112] Donald A. Cupp Jr.
[ 10.112] Current version of pixman: 0.32.6
[ 10.112] Before reporting problems, check www.thinstation.org
to make sure that you have the latest version.
[ 10.112] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 10.113] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 22 17:33:07 2017
[ 10.114] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 10.115] (==) No Layout section. Using the first Screen section.
[ 10.115] (==) No screen section available. Using defaults.
[ 10.115] (**) |-->Screen "Default Screen Section" (0)
[ 10.115] (**) | |-->Monitor "<default monitor>"
[ 10.115] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 10.115] (**) Option "IgnoreABI" "true"
[ 10.115] (**) Option "AutoAddDevices" "true"
[ 10.115] (**) Option "AutoEnableDevices" "true"
[ 10.115] (**) Ignoring ABI Version
[ 10.115] (**) Automatically adding devices
[ 10.116] (**) Automatically enabling devices
[ 10.116] (==) Automatically adding GPU devices
[ 10.116] (WW) The directory "/usr/share/fonts/X11/TTF/" does not exist.
[ 10.116] Entry deleted from font path.
[ 10.116] (WW) The directory "/usr/share/fonts/X11/OTF/" does not exist.
[ 10.116] Entry deleted from font path.
[ 10.116] (WW) The directory "/usr/share/fonts/X11/Type1/" does not exist.
[ 10.116] Entry deleted from font path.
[ 10.116] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 10.116] Entry deleted from font path.
[ 10.117] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 10.117] Entry deleted from font path.
[ 10.117] (==) FontPath set to:
/usr/share/fonts/X11/misc/
[ 10.117] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 10.117] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 10.117] (II) Loader magic: 0x82635e0
[ 10.117] (II) Module ABI versions:
[ 10.117] X.Org ANSI C Emulation: 0.4
[ 10.117] X.Org Video Driver: 19.0
[ 10.117] X.Org XInput driver : 21.0
[ 10.117] X.Org Server Extension : 9.0
[ 10.117] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 10.121] (--) PCI:*(0:0:2:0) 8086:a001:8086:a001 rev 2, Mem @ 0xfe980000/524288, 0xd0000000/268435456, 0xfe800000/1048576, I/O @ 0x0000cc00/8
[ 10.121] (--) PCI: (0:0:2:1) 8086:a002:8086:a001 rev 2, Mem @ 0xfe780000/524288
[ 10.121] (II) Open ACPI successful (/var/run/acpid.socket)
[ 10.121] (II) LoadModule: "glx"
[ 10.122] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 10.160] (II) Module glx: vendor="X.Org Foundation"
[ 10.160] compiled for 1.17.1, module version = 1.0.0
[ 10.160] ABI class: X.Org Server Extension, version 9.0
[ 10.160] (==) AIGLX enabled
[ 10.160] (==) Matched intel as autoconfigured driver 0
[ 10.160] (==) Matched intel as autoconfigured driver 1
[ 10.160] (==) Matched modesetting as autoconfigured driver 2
[ 10.160] (==) Matched fbdev as autoconfigured driver 3
[ 10.160] (==) Matched vesa as autoconfigured driver 4
[ 10.160] (==) Assigned the driver to the xf86ConfigLayout
[ 10.160] (II) LoadModule: "intel"
[ 10.161] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 10.177] (II) Module intel: vendor="X.Org Foundation"
[ 10.177] compiled for 1.17.1, module version = 2.99.917
[ 10.177] Module class: X.Org Video Driver
[ 10.177] ABI class: X.Org Video Driver, version 19.0
[ 10.177] (II) LoadModule: "modesetting"
[ 10.177] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 10.179] (II) Module modesetting: vendor="X.Org Foundation"
[ 10.179] compiled for 1.17.1, module version = 1.17.1
[ 10.179] Module class: X.Org Video Driver
[ 10.179] ABI class: X.Org Video Driver, version 19.0
[ 10.179] (II) LoadModule: "fbdev"
[ 10.179] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 10.181] (II) Module fbdev: vendor="X.Org Foundation"
[ 10.181] compiled for 1.17.1, module version = 0.4.4
[ 10.181] Module class: X.Org Video Driver
[ 10.181] ABI class: X.Org Video Driver, version 19.0
[ 10.181] (II) LoadModule: "vesa"
[ 10.182] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 10.184] (II) Module vesa: vendor="X.Org Foundation"
[ 10.184] compiled for 1.17.1, module version = 2.3.3
[ 10.184] Module class: X.Org Video Driver
[ 10.184] ABI class: X.Org Video Driver, version 19.0
[ 10.184] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 10.185] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 10.185] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 10.185] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 10.185] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 10.185] (II) FBDEV: driver for framebuffer: fbdev
[ 10.185] (II) VESA: driver for VESA chipsets: vesa
[ 10.185] (++) using VT number 5

[ 10.202] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150327
[ 10.209] (WW) Falling back to old probe method for modesetting
[ 10.209] (WW) Falling back to old probe method for fbdev
[ 10.209] (II) Loading sub module "fbdevhw"
[ 10.209] (II) LoadModule: "fbdevhw"
[ 10.210] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 10.213] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 10.214] compiled for 1.17.1, module version = 0.0.2
[ 10.214] ABI class: X.Org Video Driver, version 19.0
[ 10.214] (WW) Falling back to old probe method for vesa
[ 10.214] (--) intel(0): Integrated Graphics Chipset: Intel(R) Pineview G
[ 10.214] (--) intel(0): CPU: x86, sse2, sse3, ssse3
[ 10.214] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 10.215] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 10.215] (==) intel(0): RGB weight 888
[ 10.215] (==) intel(0): Default visual is TrueColor
[ 10.215] (II) intel(0): Output LVDS1 has no monitor section
[ 10.216] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
[ 10.216] (II) intel(0): Enabled output LVDS1
[ 10.216] (II) intel(0): Output VGA1 has no monitor section
[ 10.216] (II) intel(0): Enabled output VGA1
[ 10.216] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 10.216] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 10.216] (II) intel(0): Enabled output VIRTUAL1
[ 10.216] (--) intel(0): Output LVDS1 using initial mode 1024x768 on pipe 1
[ 10.216] (--) intel(0): Output VGA1 using initial mode 1440x900 on pipe 0
[ 10.216] (==) intel(0): TearFree disabled
[ 10.216] (==) intel(0): DPI set to (96, 96)
[ 10.216] (II) Loading sub module "dri2"
[ 10.216] (II) LoadModule: "dri2"
[ 10.216] (II) Module "dri2" already built-in
[ 10.216] (II) Loading sub module "present"
[ 10.217] (II) LoadModule: "present"
[ 10.217] (II) Module "present" already built-in
[ 10.217] (II) UnloadModule: "modesetting"
[ 10.217] (II) Unloading modesetting
[ 10.217] (II) UnloadModule: "fbdev"
[ 10.217] (II) Unloading fbdev
[ 10.217] (II) UnloadSubModule: "fbdevhw"
[ 10.217] (II) Unloading fbdevhw
[ 10.217] (II) UnloadModule: "vesa"
[ 10.217] (II) Unloading vesa
[ 10.217] (==) Depth 24 pixmap format is 32 bpp
[ 10.235] (II) intel(0): SNA initialized with Alviso (gen3) backend
[ 10.236] (==) intel(0): Backing store enabled
[ 10.236] (==) intel(0): Silken mouse enabled
[ 10.236] (II) intel(0): HW Cursor enabled
[ 10.236] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 10.236] (==) intel(0): DPMS enabled
[ 10.236] (==) intel(0): display hotplug detection enabled
[ 10.243] (II) intel(0): [XvMC] i915_xvmc driver initialized.
[ 10.243] (II) intel(0): [DRI2] Setup complete
[ 10.243] (II) intel(0): [DRI2] DRI driver: i915
[ 10.243] (II) intel(0): [DRI2] VDPAU driver: i915
[ 10.243] (II) intel(0): direct rendering: DRI2 enabled
[ 10.243] (II) intel(0): hardware support for Present enabled
[ 10.243] (--) RandR disabled
[ 10.882] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 10.882] (II) AIGLX: enabled GLX_ARB_create_context
[ 10.882] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 10.882] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 10.882] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 10.882] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 10.882] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 10.882] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 10.882] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 10.883] (II) AIGLX: Loaded and initialized i915
[ 10.883] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 10.897] (II) intel(0): switch to mode Этот адрес электронной почты защищен от спам-ботов. У вас должен быть включен JavaScript для просмотра. on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 10.913] (II) intel(0): switch to mode Этот адрес электронной почты защищен от спам-ботов. У вас должен быть включен JavaScript для просмотра. on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 10.926] (II) intel(0): Setting screen physical size to 380 x 238
[ 11.053] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 11.053] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 11.053] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 11.053] (II) LoadModule: "evdev"
[ 11.054] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 11.061] (II) Module evdev: vendor="X.Org Foundation"
[ 11.061] compiled for 1.17.1, module version = 2.9.2
[ 11.062] Module class: X.Org XInput Driver
[ 11.062] ABI class: X.Org XInput driver, version 21.0
[ 11.062] (II) Using input driver 'evdev' for 'Power Button'
[ 11.062] (**) Power Button: always reports core events
[ 11.062] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 11.062] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 11.062] (--) evdev: Power Button: Found keys
[ 11.062] (II) evdev: Power Button: Configuring as keyboard
[ 11.062] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 11.062] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 11.062] (**) Option "xkb_rules" "evdev"
[ 11.062] (**) Option "xkb_model" "pc104"
[ 11.062] (**) Option "xkb_layout" "us,ru"
[ 11.062] (**) Option "xkb_variant" ",winkeys"
[ 11.137] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 11.137] (**) Video Bus: Applying InputClass "Keyboard Defaults"
[ 11.137] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 11.137] (II) Using input driver 'evdev' for 'Video Bus'
[ 11.137] (**) Video Bus: always reports core events
[ 11.137] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 11.138] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 11.138] (--) evdev: Video Bus: Found keys
[ 11.138] (II) evdev: Video Bus: Configuring as keyboard
[ 11.138] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14/event6"
[ 11.138] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 11.138] (**) Option "xkb_rules" "evdev"
[ 11.138] (**) Option "xkb_model" "pc104"
[ 11.138] (**) Option "xkb_layout" "us,ru"
[ 11.138] (**) Option "xkb_variant" ",winkeys"
[ 11.140] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 11.140] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 11.140] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 11.140] (II) Using input driver 'evdev' for 'Power Button'
[ 11.140] (**) Power Button: always reports core events
[ 11.140] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 11.140] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 11.140] (--) evdev: Power Button: Found keys
[ 11.140] (II) evdev: Power Button: Configuring as keyboard
[ 11.140] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 11.140] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id
[ 11.140] (**) Option "xkb_rules" "evdev"
[ 11.140] (**) Option "xkb_model" "pc104"
[ 11.140] (**) Option "xkb_layout" "us,ru"
[ 11.140] (**) Option "xkb_variant" ",winkeys"
[ 11.142] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 11.142] (**) Sleep Button: Applying InputClass "Keyboard Defaults"
[ 11.142] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 11.142] (II) Using input driver 'evdev' for 'Sleep Button'
[ 11.142] (**) Sleep Button: always reports core events
[ 11.142] (**) evdev: Sleep Button: Device: "/dev/input/event0"
[ 11.142] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 11.142] (--) evdev: Sleep Button: Found keys
[ 11.142] (II) evdev: Sleep Button: Configuring as keyboard
[ 11.142] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[ 11.142] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 11.142] (**) Option "xkb_rules" "evdev"
[ 11.143] (**) Option "xkb_model" "pc104"
[ 11.143] (**) Option "xkb_layout" "us,ru"
[ 11.143] (**) Option "xkb_variant" ",winkeys"
[ 11.145] (II) config/udev: Adding input device HID 04d9:2519 (/dev/input/event4)
[ 11.145] (**) HID 04d9:2519: Applying InputClass "Keyboard Defaults"
[ 11.145] (**) HID 04d9:2519: Applying InputClass "evdev keyboard catchall"
[ 11.145] (II) Using input driver 'evdev' for 'HID 04d9:2519'
[ 11.145] (**) HID 04d9:2519: always reports core events
[ 11.145] (**) evdev: HID 04d9:2519: Device: "/dev/input/event4"
[ 11.146] (--) evdev: HID 04d9:2519: Vendor 0x4d9 Product 0x2519
[ 11.146] (--) evdev: HID 04d9:2519: Found keys
[ 11.146] (II) evdev: HID 04d9:2519: Configuring as keyboard
[ 11.146] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:04D9:2519.0001/input/input8/event4"
[ 11.146] (II) XINPUT: Adding extended input device "HID 04d9:2519" (type: KEYBOARD, id 10)
[ 11.146] (**) Option "xkb_rules" "evdev"
[ 11.146] (**) Option "xkb_model" "pc104"
[ 11.146] (**) Option "xkb_layout" "us,ru"
[ 11.146] (**) Option "xkb_variant" ",winkeys"
[ 11.148] (II) config/udev: Adding input device HID 04d9:2519 (/dev/input/event5)
[ 11.148] (**) HID 04d9:2519: Applying InputClass "Keyboard Defaults"
[ 11.148] (**) HID 04d9:2519: Applying InputClass "evdev pointer catchall"
[ 11.148] (**) HID 04d9:2519: Applying InputClass "evdev keyboard catchall"
[ 11.148] (II) Using input driver 'evdev' for 'HID 04d9:2519'
[ 11.148] (**) HID 04d9:2519: always reports core events
[ 11.148] (**) evdev: HID 04d9:2519: Device: "/dev/input/event5"
[ 11.148] (--) evdev: HID 04d9:2519: Vendor 0x4d9 Product 0x2519
[ 11.148] (--) evdev: HID 04d9:2519: Found 9 mouse buttons
[ 11.148] (--) evdev: HID 04d9:2519: Found scroll wheel(s)
[ 11.149] (--) evdev: HID 04d9:2519: Found relative axes
[ 11.149] (--) evdev: HID 04d9:2519: Found x and y relative axes
[ 11.149] (--) evdev: HID 04d9:2519: Found absolute axes
[ 11.149] (II) evdev: HID 04d9:2519: Forcing absolute x/y axes to exist.
[ 11.149] (--) evdev: HID 04d9:2519: Found keys
[ 11.149] (II) evdev: HID 04d9:2519: Configuring as mouse
[ 11.149] (II) evdev: HID 04d9:2519: Configuring as keyboard
[ 11.149] (II) evdev: HID 04d9:2519: Adding scrollwheel support
[ 11.149] (**) evdev: HID 04d9:2519: YAxisMapping: buttons 4 and 5
[ 11.149] (**) evdev: HID 04d9:2519: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 11.149] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/0003:04D9:2519.0002/input/input9/event5"
[ 11.149] (II) XINPUT: Adding extended input device "HID 04d9:2519" (type: KEYBOARD, id 11)
[ 11.149] (**) Option "xkb_rules" "evdev"
[ 11.149] (**) Option "xkb_model" "pc104"
[ 11.149] (**) Option "xkb_layout" "us,ru"
[ 11.149] (**) Option "xkb_variant" ",winkeys"
[ 11.150] (II) evdev: HID 04d9:2519: initialized for relative axes.
[ 11.150] (WW) evdev: HID 04d9:2519: ignoring absolute axes.
[ 11.150] (**) HID 04d9:2519: (accel) keeping acceleration scheme 1
[ 11.150] (**) HID 04d9:2519: (accel) acceleration profile 0
[ 11.150] (**) HID 04d9:2519: (accel) acceleration factor: 2.000
[ 11.150] (**) HID 04d9:2519: (accel) acceleration threshold: 4
[ 11.151] (II) config/udev: Adding input device HID 04d9:2519 (/dev/input/mouse0)
[ 11.152] (**) HID 04d9:2519: Applying InputClass "Keyboard Defaults"
[ 11.152] (II) No input driver specified, ignoring this device.
[ 11.152] (II) This device may have been added with another device file.
[ 11.152] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 11.153] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[ 11.153] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 11.153] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 11.153] (**) AT Translated Set 2 keyboard: always reports core events
[ 11.153] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 11.153] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 11.153] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 11.153] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 11.153] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 11.153] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 11.153] (**) Option "xkb_rules" "evdev"
[ 11.153] (**) Option "xkb_model" "pc104"
[ 11.153] (**) Option "xkb_layout" "us,ru"
[ 11.153] (**) Option "xkb_variant" ",winkeys"

[ 88.778]
X.Org X Server 1.18.3
Release Date: 2016-04-04
[ 88.778] X Protocol Version 11, Revision 0
[ 88.778] Build Operating System: ThinStation Thinstation
[ 88.778] Current Operating System: Linux P17_027_Comp1 4.6.3TS_SMP #1 SMP PREEMPT Mon Jun 27 14:28:25 UTC 2016 i686
[ 88.778] Kernel command line: usbhid.quirks=0x1bfd:0x3050:0x40 BOOT_IMAGE=workboot/vmlinuz initrd=workboot/initrd splash=silent,theme:default load_ramdisk=1 ramdisk_blocksize=4096 root=/dev/ram0 ramdisk_size=986432 console=tty1 vt.global_cursor_default=0 quiet loglevel=3 LM=3
[ 88.778] Build Date: 02 June 2016 03:08:29AM
[ 88.778] Donald A. Cupp Jr.
[ 88.778] Current version of pixman: 0.34.0
[ 88.778] Before reporting problems, check www.thinstation.org
to make sure that you have the latest version.
[ 88.778] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 88.779] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 22 19:21:16 2017
[ 88.779] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 88.780] (==) No Layout section. Using the first Screen section.
[ 88.780] (==) No screen section available. Using defaults.
[ 88.780] (**) |-->Screen "Default Screen Section" (0)
[ 88.780] (**) | |-->Monitor "<default monitor>"
[ 88.780] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 88.780] (**) Option "IgnoreABI" "true"
[ 88.780] (**) Option "AutoAddDevices" "true"
[ 88.780] (**) Option "AutoEnableDevices" "true"
[ 88.780] (**) Ignoring ABI Version
[ 88.780] (**) Automatically adding devices
[ 88.780] (**) Automatically enabling devices
[ 88.780] (==) Automatically adding GPU devices
[ 88.780] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 88.780] (WW) The directory "/usr/share/fonts/X11/OTF/" does not exist.
[ 88.780] Entry deleted from font path.
[ 88.780] (WW) The directory "/usr/share/fonts/X11/Type1/" does not exist.
[ 88.780] Entry deleted from font path.
[ 88.780] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 88.780] Entry deleted from font path.
[ 88.780] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 88.780] Entry deleted from font path.
[ 88.780] (==) FontPath set to:
/usr/share/fonts/X11/misc/,
/usr/share/fonts/X11/TTF/
[ 88.780] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 88.780] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 88.780] (II) Loader magic: 0x827cb20
[ 88.781] (II) Module ABI versions:
[ 88.781] X.Org ANSI C Emulation: 0.4
[ 88.781] X.Org Video Driver: 20.0
[ 88.781] X.Org XInput driver : 22.1
[ 88.781] X.Org Server Extension : 9.0
[ 88.783] (--) PCI:*(0:0:2:0) 8086:a001:8086:a001 rev 2, Mem @ 0xfe980000/524288, 0xd0000000/268435456, 0xfe800000/1048576, I/O @ 0x0000cc00/8, BIOS @ 0x????????/131072
[ 88.783] (--) PCI: (0:0:2:1) 8086:a002:8086:a001 rev 2, Mem @ 0xfe780000/524288
[ 88.784] (II) Open ACPI successful (/var/run/acpid.socket)
[ 88.784] (II) LoadModule: "glx"
[ 88.785] (WW) Warning, couldn't open module glx
[ 88.785] (II) UnloadModule: "glx"
[ 88.785] (II) Unloading glx
[ 88.785] (EE) Failed to load module "glx" (module does not exist, 0)
[ 88.785] (==) Matched intel as autoconfigured driver 0
[ 88.785] (==) Matched modesetting as autoconfigured driver 1
[ 88.785] (==) Matched fbdev as autoconfigured driver 2
[ 88.785] (==) Matched vesa as autoconfigured driver 3
[ 88.785] (==) Assigned the driver to the xf86ConfigLayout
[ 88.785] (II) LoadModule: "intel"
[ 88.785] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 88.786] (II) Module intel: vendor="X.Org Foundation"
[ 88.786] compiled for 1.18.3, module version = 2.99.917
[ 88.786] Module class: X.Org Video Driver
[ 88.786] ABI class: X.Org Video Driver, version 20.0
[ 88.786] (II) LoadModule: "modesetting"
[ 88.786] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 88.786] (II) Module modesetting: vendor="X.Org Foundation"
[ 88.786] compiled for 1.18.3, module version = 1.18.3
[ 88.786] Module class: X.Org Video Driver
[ 88.786] ABI class: X.Org Video Driver, version 20.0
[ 88.787] (II) LoadModule: "fbdev"
[ 88.787] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 88.787] (II) Module fbdev: vendor="X.Org Foundation"
[ 88.787] compiled for 1.18.3, module version = 0.4.4
[ 88.787] Module class: X.Org Video Driver
[ 88.787] ABI class: X.Org Video Driver, version 20.0
[ 88.787] (II) LoadModule: "vesa"
[ 88.787] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 88.787] (II) Module vesa: vendor="X.Org Foundation"
[ 88.787] compiled for 1.18.3, module version = 2.3.4
[ 88.787] Module class: X.Org Video Driver
[ 88.787] ABI class: X.Org Video Driver, version 20.0
[ 88.788] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 88.788] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 88.788] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 88.788] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 88.788] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 88.788] (II) FBDEV: driver for framebuffer: fbdev
[ 88.788] (II) VESA: driver for VESA chipsets: vesa
[ 88.788] (++) using VT number 5

[ 90.803] intel: waited 2020 ms for i915.ko driver to load
[ 90.806] (EE) open /dev/dri/card0: No such file or directory
[ 90.806] (WW) Falling back to old probe method for modesetting
[ 90.806] (EE) open /dev/dri/card0: No such file or directory
[ 90.806] (II) Loading sub module "fbdevhw"
[ 90.806] (II) LoadModule: "fbdevhw"
[ 90.806] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 90.807] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 90.807] compiled for 1.18.3, module version = 0.0.2
[ 90.807] ABI class: X.Org Video Driver, version 20.0
[ 90.807] (**) FBDEV(1): claimed PCI slot 0@0:2:0
[ 90.807] (II) FBDEV(1): using default device
[ 90.807] (WW) Falling back to old probe method for vesa
[ 90.807] (EE) Screen 0 deleted because of no matching config section.
[ 90.807] (II) UnloadModule: "modesetting"
[ 90.807] (II) FBDEV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 90.807] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[ 90.807] (==) FBDEV(0): RGB weight 888
[ 90.807] (==) FBDEV(0): Default visual is TrueColor
[ 90.807] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 90.807] (II) FBDEV(0): hardware: VESA VGA (video memory: 8128kB)
[ 90.807] (II) FBDEV(0): checking modes against framebuffer device...
[ 90.807] (II) FBDEV(0): checking modes against monitor...
[ 90.807] (--) FBDEV(0): Virtual size is 1280x1024 (pitch 1280)
[ 90.807] (**) FBDEV(0): Built-in mode "current": 135.0 MHz, 80.0 kHz, 75.0 Hz
[ 90.807] (II) FBDEV(0): Modeline "current"x0.0 135.01 1280 1296 1440 1688 1024 1025 1028 1066 -hsync +vsync -csync (80.0 kHz b)
[ 90.807] (==) FBDEV(0): DPI set to (96, 96)
[ 90.808] (II) Loading sub module "fb"
[ 90.808] (II) LoadModule: "fb"
[ 90.808] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 90.809] (II) Module fb: vendor="X.Org Foundation"
[ 90.809] compiled for 1.18.3, module version = 1.0.0
[ 90.809] ABI class: X.Org ANSI C Emulation, version 0.4
[ 90.809] (**) FBDEV(0): using shadow framebuffer
[ 90.809] (II) Loading sub module "shadow"
[ 90.809] (II) LoadModule: "shadow"
[ 90.809] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 90.810] (II) Module shadow: vendor="X.Org Foundation"
[ 90.810] compiled for 1.18.3, module version = 1.1.0
[ 90.810] ABI class: X.Org ANSI C Emulation, version 0.4
[ 90.810] (II) UnloadModule: "vesa"
[ 90.810] (II) Unloading vesa
[ 90.810] (==) Depth 24 pixmap format is 32 bpp
[ 90.811] (==) FBDEV(0): Backing store enabled
[ 90.811] (==) FBDEV(0): DPMS enabled
[ 90.811] (==) RandR enabled
[ 90.916] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 90.916] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 90.916] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 90.916] (II) LoadModule: "evdev"
[ 90.916] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 90.917] (II) Module evdev: vendor="X.Org Foundation"
[ 90.917] compiled for 1.18.3, module version = 2.10.3
[ 90.917] Module class: X.Org XInput Driver
[ 90.917] ABI class: X.Org XInput driver, version 22.1
[ 90.918] (II) Using input driver 'evdev' for 'Power Button'
[ 90.918] (**) Power Button: always reports core events
[ 90.918] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 90.918] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 90.918] (--) evdev: Power Button: Found keys
[ 90.918] (II) evdev: Power Button: Configuring as keyboard
[ 90.918] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 90.918] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 90.918] (**) Option "xkb_rules" "evdev"
[ 90.918] (**) Option "xkb_layout" "us,ru"
[ 90.918] (**) Option "xkb_variant" ",winkeys"
[ 90.918] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 90.993] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 90.993] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 90.993] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 90.993] (II) Using input driver 'evdev' for 'Power Button'
[ 90.993] (**) Power Button: always reports core events
[ 90.993] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 90.993] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 90.993] (--) evdev: Power Button: Found keys
[ 90.993] (II) evdev: Power Button: Configuring as keyboard
[ 90.993] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 90.993] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 90.993] (**) Option "xkb_rules" "evdev"
[ 90.993] (**) Option "xkb_layout" "us,ru"
[ 90.993] (**) Option "xkb_variant" ",winkeys"
[ 90.993] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 90.995] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 90.995] (**) Sleep Button: Applying InputClass "Keyboard Defaults"
[ 90.995] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 90.995] (II) Using input driver 'evdev' for 'Sleep Button'
[ 90.995] (**) Sleep Button: always reports core events
[ 90.995] (**) evdev: Sleep Button: Device: "/dev/input/event0"
[ 90.995] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 90.995] (--) evdev: Sleep Button: Found keys
[ 90.995] (II) evdev: Sleep Button: Configuring as keyboard
[ 90.995] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[ 90.995] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id
[ 90.995] (**) Option "xkb_rules" "evdev"
[ 90.995] (**) Option "xkb_layout" "us,ru"
[ 90.995] (**) Option "xkb_variant" ",winkeys"
[ 90.995] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 90.997] (II) config/udev: Adding input device HID 04d9:2519 (/dev/input/event4)
[ 90.997] (**) HID 04d9:2519: Applying InputClass "Keyboard Defaults"
[ 90.997] (**) HID 04d9:2519: Applying InputClass "evdev keyboard catchall"
[ 90.997] (II) Using input driver 'evdev' for 'HID 04d9:2519'
[ 90.997] (**) HID 04d9:2519: always reports core events
[ 90.997] (**) evdev: HID 04d9:2519: Device: "/dev/input/event4"
[ 90.997] (--) evdev: HID 04d9:2519: Vendor 0x4d9 Product 0x2519
[ 90.997] (--) evdev: HID 04d9:2519: Found keys
[ 90.997] (II) evdev: HID 04d9:2519: Configuring as keyboard
[ 90.998] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:04D9:2519.0001/input/input8/event4"
[ 90.998] (II) XINPUT: Adding extended input device "HID 04d9:2519" (type: KEYBOARD, id 9)
[ 90.998] (**) Option "xkb_rules" "evdev"
[ 90.998] (**) Option "xkb_layout" "us,ru"
[ 90.998] (**) Option "xkb_variant" ",winkeys"
[ 90.998] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 90.999] (II) config/udev: Adding input device HID 04d9:2519 (/dev/input/event5)
[ 90.999] (**) HID 04d9:2519: Applying InputClass "Keyboard Defaults"
[ 91.000] (**) HID 04d9:2519: Applying InputClass "evdev pointer catchall"
[ 91.000] (**) HID 04d9:2519: Applying InputClass "evdev keyboard catchall"
[ 91.000] (II) Using input driver 'evdev' for 'HID 04d9:2519'
[ 91.000] (**) HID 04d9:2519: always reports core events
[ 91.000] (**) evdev: HID 04d9:2519: Device: "/dev/input/event5"
[ 91.000] (--) evdev: HID 04d9:2519: Vendor 0x4d9 Product 0x2519
[ 91.000] (--) evdev: HID 04d9:2519: Found 9 mouse buttons
[ 91.000] (--) evdev: HID 04d9:2519: Found scroll wheel(s)
[ 91.000] (--) evdev: HID 04d9:2519: Found relative axes
[ 91.000] (--) evdev: HID 04d9:2519: Found x and y relative axes
[ 91.000] (--) evdev: HID 04d9:2519: Found absolute axes
[ 91.000] (II) evdev: HID 04d9:2519: Forcing absolute x/y axes to exist.
[ 91.000] (--) evdev: HID 04d9:2519: Found keys
[ 91.000] (II) evdev: HID 04d9:2519: Configuring as mouse
[ 91.000] (II) evdev: HID 04d9:2519: Configuring as keyboard
[ 91.000] (II) evdev: HID 04d9:2519: Adding scrollwheel support
[ 91.000] (**) evdev: HID 04d9:2519: YAxisMapping: buttons 4 and 5
[ 91.000] (**) evdev: HID 04d9:2519: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 91.000] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/0003:04D9:2519.0002/input/input9/event5"
[ 91.000] (II) XINPUT: Adding extended input device "HID 04d9:2519" (type: KEYBOARD, id 10)
[ 91.000] (**) Option "xkb_rules" "evdev"
[ 91.000] (**) Option "xkb_layout" "us,ru"
[ 91.000] (**) Option "xkb_variant" ",winkeys"
[ 91.000] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 91.001] (II) evdev: HID 04d9:2519: initialized for relative axes.
[ 91.001] (WW) evdev: HID 04d9:2519: ignoring absolute axes.
[ 91.001] (**) HID 04d9:2519: (accel) keeping acceleration scheme 1
[ 91.001] (**) HID 04d9:2519: (accel) acceleration profile 0
[ 91.001] (**) HID 04d9:2519: (accel) acceleration factor: 2.000
[ 91.002] (**) HID 04d9:2519: (accel) acceleration threshold: 4
[ 91.002] (II) config/udev: Adding input device HID 04d9:2519 (/dev/input/mouse0)
[ 91.003] (**) HID 04d9:2519: Applying InputClass "Keyboard Defaults"
[ 91.003] (II) No input driver specified, ignoring this device.
[ 91.003] (II) This device may have been added with another device file.
[ 91.003] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 91.003] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[ 91.003] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 91.003] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 91.004] (**) AT Translated Set 2 keyboard: always reports core events
[ 91.004] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 91.004] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 91.004] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 91.004] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 91.004] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 91.004] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 91.004] (**) Option "xkb_rules" "evdev"
[ 91.004] (**) Option "xkb_layout" "us,ru"
[ 91.004] (**) Option "xkb_variant" ",winkeys"
[ 91.004] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"

################################################
### --- Thinstation Build Config --- ###
################################################
#
#
# This is Thinstation s basic setup file. In this file you decide which
# hardware, programs and features to be included in the Thinstation
# boot image generated by running "./build".
#
# You can customize/limit the possibilities in the thinstation.conf
# files later.
#
# Anything after a "#" is a comment. You activate "things" by removing
# the "#" and remove "things" by putting a "#" in front of them.
#
# First we define which modules to include. Modules are hardware
# drivers. NEVER include more than necessary - the more modules, the
# longer boot time.

########################################################
### --- Machine Modules to include in boot image --- ###
########################################################
# A machine profile is a set of modules for a specific set of hardware
# components like a thinclient with adapters. It does not include any
# filesystem modules, those need to be selected individualy. Making a
# a machine profile is a two step process. First you will need to make
# an allmodules build like "./build --allmodules" with the extensions-x
# package included. Once the client machine is booted with that image
# you can open and xterm or telnet in and run "hwlister.sh". hwlister.sh
# will compile some lists and attempt to post them to the pxe server assigned
# to the client. If the pxe server is this workstation and you are hosting
# files directly out of this build env, you can then run
# "./mkmachine SOME-MODEL" and the files will be put into the machine folder
# under that model name. Now all you have to do is add a line to this file
# like "machine SOME-MODEL" and you will no longer have to make
# allmodules builds. If this is not the pxe server, you will have to
# move stuff around on your own, but the most important files are
# modules.list and firmware.list.

################################################
### --- Modules to include in boot image --- ###
################################################
# Any modules may be added as "module" or "module_pkg".
# If defined as a "module", the driver is included in the boot image.
# If defined as a "module_pkg", the driver is added from outside the
# image, such as from a tftp server. See note below for more details.
#
# Normally you should use "module". Only use "module_pkg" if you want
# to dynamically load modules.
# Note: If you create a module_pkg network driver, and decide to load it
# from a tftp server, it won t work. This is because the image
# won t have a network driver to get the module_pkg in the first
# place.

#!Hardware
#!!Machine module list

machine ACER-ROMB # Машины в виде робма
machine ShuttleXS35V2 # Машины
machine Pegatron # Новые тонкие клиенты
machine Foxconn

#machine m704 # Gigabyte m704 Rover PC
#machine WYSE9150se # WYSE 9150se Thin Client
#machine NT-A3500 # Foxconn AMD E-350 Barebone
#machine NT-535 # Foxconn Intel D525 Barebone
#machine Dell-FX170 # Dell FX170 D525 Atom Machine
#machine VMWare # A good set of modules for a VmWare Virtual Machine
#machine Virtualbox-4.1 # A good set of modules for a Virtualbox Virtual Machine
#machine VIA-Epia-CLE266 # VIA Epia/Eden based on the the CLE266 chip. Rather common in thin clients a few years old
#machine classic_generic # Big list of modules that you can choose by unremarking them
#machine IGEL-M300C # Igel CX700 Via
#machine HP-t5135 # HP CX700 Via
#machine foxconn-nT-330i # Foxconn nT 330i Barebone
#machine foxconn-nT-435 # Foxconn nT 435 Barebone
#machine foxconn-nT-535 # Foxconn nT 535 Barebone
#machine foxconn-nT-A3800 # Foxconn nT A3800 Barebone
#machine foxconn-nT-i2847 # Foxconn nT i2847 Barebone
#machine foxconn-nT-iBT18 # Foxconn nT iBT18 Barebone
#machine foxconn-nT-n270 # Foxconn nT n270 Barebone

#!!Wireless Stuff
package wpa_supplicant
package wireless
package wifi-connect
#!!!Misc Modules

#!!Filesystem Support
# Every mounted device needs a filesystem, so choose which ones you need.
module usb-storage
#module autofs4 # Automount and autofs support
module isofs # ISO9960 file system support for CDRoms
module udf # CDRom UDF file system support
module vfat # Fat and VFat file system support
module ntfs # NTFS file system support
#module ext2 # Ext2 file system support
#module ext3 # Ext3 file system support
module ext4 # Ext4 file system support
#module nfs # NFS file system support
#module cifs # CIFS support (use either this or smbfs - not both)

#################################################
### --- Packages to include in boot image --- ###
#################################################

# A package is a program or utility.
# Any packages may be added as "package" or "pkg".
# If defined as a "package", the program is included in the boot image.
# If defined as a "pkg", the program is added from outside the image.
# Normally, you should use "package". Only use "pkg" if you want to
# dynamically load programs.


# --- Packages to include in boot image
# --- Packages below may be "package" or "pkg"
#!!Miscellaneous
package xmenu # Наше меню для выбора сервера
package overlayfs # This is needed in order for squashfs compression mode to work.
package ts-classic # The classic ts logic for network/netfiles/hostname/mounting/telnetd/telnet/playcd
#package automount
package udisks
#package networkmanager
#package udisks-glue
package ntp # Utility to obtain date & time from network
#package sound-esd # Enable sound-esd or sound-nasd if you want to be able to control
#package sound-nasd # sound on your thin client from another computer or
# your remote session.
package alsa
#package gnome-media
#package gnome-network-properties
#package gnome-core
#package volumeicon
#package kismet
#package gst-plugins-base
#package gst-plugins-good
#package crystalhd
#package libva
#package iptables # IP Tables support
package cpufreq
#package cpuspeed
#package wine # Windows Application Execution Platform

#!!X related
# --- XOrg 7.7
#package xorg7-v4l
package xorg7-vesa #A fallback driver that works with almost everything. Does allow resolution changes
package xorg7-vmware
package xorg7-ati #ATI video driver for most modern ATI chipsets. Usually requires several firmwares
package xorg7-nouveau #New opensource nvidia driver
#package xorg7_nvidia #Proprietary nvidia driver
#package xorg7_nvidia_64 # Additional 64bit module
package xorg7-openchrome #Via Video Chipsets driver
package xorg7-intel #Intel video driver for most modern chipsets except the GMA3500/3600
#package xorg7-sis

#!!Locale or localization files for keyboard and fonts. (Language/Country)
#package locale-cs_CZ # Czech
#package locale-da_DK # Danish
#package locale-de_DE # German
#package locale-en_GB # English-Great Britain
package locale-en_US # English-US
#package locale-es_ES # Spanish
#package locale-fi_FI # Finnish
#package locale-fr_BE # French Belgium
#package locale-fr_CA # French Canadian
#package locale-fr_CH # French Switzerland
#package locale-fr_FR # French
#package locale-hr_HR # Croation
#package locale-hu_HU # Hungarian
#package locale-it_IT # Italian
#package locale-ja_JP # Japanese
#package locale-nb_NO # Norwegian (bokmål)
#package locale-pl_PL # Polish
#package locale-pt_PT # Portuguese
#package locale-pt_BR # Portuguese-Brazil
package locale-ru_RU # Russian
#package locale-sv_SE # Swedish
#package locale-tr_TR # Turkish
#package locale-uk_UA # Ukrainian

#!Applications
#!!Connection Package types. Choose *at least* one!
package freerdp # X RDP Client - fork of rdesktop
#package rdesktop # X RDP client for Windows Terminal Services (ver 1.7)
#package vncviewer # VNC client (vncviewer)
#package xorg7vnc # Remote Control Client Workstation
#package ica # Citrix ICA client support
#package tarantella # Tarantella client support
#package xnest # XDM in a window client
#package urxvt # Light Xterm Client (vt102)
package xterm # Xterm Client (vt220)
#package ssh # Secure Shell client
#package tn5250 # 5250 terminal emulator
#package dillo # Dillo light web browser
#package thinlinc # Cendio ThinLinc client support
#package nx # No Machine NX client
#package 2x # 2X client
#package java # Java runtime
#package firefox_lowmem # Firefox 3 for low resource machines
#package firefox # Firefox current Web Browser
#package chrome # Google Chrome Web Browser
#package kiosk # Rkiosk Plugin for Firefox
#package flash_lowmem # Flash 9 browser plugin for firefox and low resource machines
#package flash # Flash Current
#package filezilla # FileZilla FTP Client for X
#package git # GIT Version Control System
#package gparted # Gnome Partition Manager
#package open-vm-tools
#package vboxguest
#package medit # Notepad
#package mplayer # DVD and video player
#package vmview # VMware Open-View Client, no PCoIP
#package vmviewpcoip # VMware Open-View Client, PCOIP
#package xbmc # XBMC Media Center for X
#package evince # X PDF Viewer

#!!Window Managers. Choose no more than 1 window manager.
# Not needed if you don t want to manage windows.
#package openbox # A spartin clean/fast window manager.
#package xdesktop-kiosk # A locked down desktop kiosk using the openbox wm (See packages/xdesktop-kiosk/build/conf for
# more help.
#package icewm # "ICEWM" window manager. Makes TS a light workstation.
#package icewm-theme-xp
#package icewm-themes # Extra IceWM themes
#package icewm-theme-bernstein
#package icewm-theme-bluecrux
#package icewm-theme-liquid

package xfwm4
#package xfwm4-extra
package xfce4-power-manager
package terminal # Terminal emulator for xfwm4 -- Pulls in xfwm4
#package thunar # File Manager for xfwm4 -- Pulls in xfwm4

#!!Window Manager Utils
#package idle-shutdown # Package that lets you specify automatic shutdown settings and logic.
#package wbar # Adds icons to desktop
#package idesk

#!!Other services
#package www # Web access to client. From a browser: "http://<IP number>"
# The standard page is for general user settings, administrative access
# is on port 6800.
package lp_server # Remote printing daemon (JetDirect compatible)
#package lpr # LPR Print Server, for use with samba-server package
#package lprng # LPRng Print Server, supports network based printing
package cups
#package sshd # Dropbear secure shell server
#package tftpd # Built in tftpd server. Useful for making a tftpserver
# for thinstation on a WAN over a slow link.
#package samba-server # Samba server FS Support, allows you to share
# local floppy/cdrom/hd/printer to other Windows
# PCs. Needs supermount for removeable media.
package samba-client # Samba smbclient, gives a shell like environment to access an samba server
#package hdupdate # Package for updating TS images on a hardisk over a network connection
#package scp # Add ability to download files over internet using scp. This package
# adds some networking based options for downloading configuration files or
# in using hdupdate package.
#package openvpn # OpenVPN Client Support


#!!PCSCD Card Readers
#package gemplus410 # Card reader Gemplus 410 (Serial) and Gemplus 430 (USB)
#package ccidreader # Generic USB card reader


#!!Miscellaneous
#package gtk-2.0 # Full gtk-2.0 plus clearlooks theme
#package icons-cursor # Anti Aliased Mouse Cursor Theme
#package icons-hicolor # Hi-Color icons for some applications and themes. Does not really contain any icons.
#package icons-gnome # gnome Hi-Color icons theme. Needed by most other icon themes.
#package icons-tango # tango Hi-Color icons theme
#package icons-neu # neu Hi-Color icons theme
#package fonts-misc
#package fonts-jis-misc # Japanese Industrial
#package fonts-util
package fonts-cyrillic
#package fonts-Speedo-Bitstream
package fonts-TTF-BH # This one works nicely most of the time and is small.
package fonts-TTF-vera
#package fonts-TTF-MS # Fonts for rendering documents developed on the MS Platform.
# Might want to talk to a lawyer before using these.
package fonts-TTF-liberation
#package fonts-75dpi-Adobe
#package fonts-75dpi-Adobe-Utopia
#package fonts-75dpi-BH
#package fonts-75dpi-BH-Typewriter
#package fonts-75dpi-Bitstream
#package fonts-100dpi-Adobe
#package fonts-100dpi-Adobe-Utopia
#package fonts-100dpi-BH
#package fonts-100dpi-BH-Typewriter
#package fonts-100dpi-Bitstream
#package fonts-Type1-Adobe-Utopia
#package fonts-Type1-BH
#package fonts-Type1-Bitstream
#package fonts-Type1-IBM
#package fonts-Type1-xfree86
#package lshw # list hardware
#package e3 # Basic vi like Editor
#package rox # Basic File Manager
#package debug # metapackage to include other debugging packages and stop during bootup to check things.
#package extensions # Adds various shell commands, will increase image size.
#package extensions-x # Adds various utility s for the X Environment !!!! INCLUDES hwlister.sh !!!!
#package eGalax # eGalax TouchKit Drivers/Utility for serial and usb touchscreens by EETI.
#package installer # Wipes a drive, makes partitions and downloads thinstation from a pxe server
#package devstation # Starts a tftp server that hosts files from the boot-images/pxe folder

# Parameters
########################################
### --- Miscellaneous Parameters --- ###
########################################
#!!Basic

#param fastboot true # Mangles the filesystem a special way as to improve boot spead and reduce
# memory utilization. Cool/Dangerous . Harder to dubug other packages. (Finishing Touch)
# Set to 'true' to enable or 'lotsofmem' for slightly slower booting but no squash lag on app launch.
#param tsuser tsuser # Name of the user that thinstation will run as. Needs userauto package.
#param tsuserpasswd pleasechangeme # Do Change! Console/telnet password for non-root

# If this is enabled, Telnetd will be enabled.
#param storagepasswd pleasechangeme # Password for storage server
#param dialuppasswd pleasechangeme # Password for dialin account
#param sambapasswd pleasechangeme # Password for samba shares when using user mode security
#param kernelcmdline "radeon.modeset=0" # Add additional kernel command lines. e.g. disable radeon framebuffer
#param stripelf yes # Strip extraneous information from elf binaries (Maybe not Safe)
#param acpisupport disable # Tells the kernel not to load acpi modules. (Breaks some Intel Chipsets if disabled)
#param uvesafb disable # Disable uvesafb (legacy option like modesetfb)
#param extra_vid LVDS-1:d # Add an extra video= parameter to kernel cmd line (good for disabling outputs on video cards)
param bootlogo true # Enable or Disable the use of the Boot splash.
param boottheme default # Backgound picture during boot
#param splash verbose # kernel splash setting (0=off, silent or verbose (default=silent)
param splash silent
param fbmtrr 0 # MTRR value for uvesafb (default = 0, 4 is the best) grep your log to make sure you have not set it to high
#param fbnocrtc true # This is usually a good thing.
param fbsm ywrap # Window scrolling method (redraw, ypan, ywrap) ywrap is best, but may not work correctly for all people
#param fbvtotal 16 # Override Video Bios Reported Memory in MB
#param fbmaxhf 67 # Override Video Negotiated Max Horizontal Frequency
#param fbmaxvf 61 # Override Video Negotiated Max Vertical Frequency
#param fbmaxclk 155 # Override Video Negotiated Max Clock Frequency
#param fbnoedid true # Don t do video edid
#param bootresolution 1024x600-32 # Resolution used during Thinstation boot.
#param bootresolution 1024x768-32 # You can wright your own resolution mode here, if you know it.
#param bootresolution 1152x864-32
param bootresolution 1280x768-32
#param bootresolution 1366x768-32 # Otherwise, you may want to refer to the vbe_modes.list you created with hwlister.sh
#param bootresolution 1280x1024-32 # for modes that your card supports.
#param bootresolution 1400x900-32 # It is also used by xrandr if no xrandr options are specified.
#param bootresolution 1680x1050-32
#param bootresolution 1920x1080-32
#param bootresolution 1400x1050-32

param desktop file:./backgrounds/Hive_Lite.jpg # Custom image to load as desktop background
param defaultconfig thinstation.conf.buildtime # The file with default setup. No other config file is found
# during boot.
param basename thinstation # Used for all config/tftp/scp file names
param basepath . # Used to determine path to tftp/scp files
#param keyfile ./id_rsa # Path for private key file used for ssh/scp
#param knownhosts ./known_hosts # Path for ssh known_hosts file for ssh/scp
#param localpkgs false # to determine is PKG files are to be loaded locally
#param fulllocales true # Use full locale support for packages
#param icaencryption false # Use ica encryption support, add 290k to image
param haltonerror false # Will halt on error, default is true
param hardlinkfs true
param sametimestmp true # When enabled, the timestamps for all files and folders will be set to 00:00 of todays date in your timezone
param initrdcmd "squashfs" # Compression mode and level of initrd file. none, gzip -9, lzma -9 ,bzip2 -9
param bootverbosity 3 # Increased vebosity when booting TS
# 0 no verbose messages
# 1 boot
# 2 network
# 4 init
# 8 kernel
# 16 modules
# 32 packages
# 64 email bootlog file to SMTP server & user set in
# thinstation.conf file. This will only work
# if networking is working.
#
# Combinations can be used (e.g. 24 does Kernel and Module Messages)

#!!Advanced
# Leave this alone unless you can t download (wget required on your Linux box):
param downloads /downloads
param bootimages "iso syslinux pxe"
#param bootimages "pxe"
param syslinuxtheme "default"
#param httpproxy http://192.168.1.2:8080

#param bootfssize 50% # Modify the size of the tmpfs filesystem

param allres true # Includes a lot of resolution splash images for live-cd s
param allfirmware true # Includes a lot of firmwares for live-cd s
param blacklist snd-pcsp.ko
param mesa_3d disable
param rootpasswd 123456
param xorgvncpasswd 123456
package tsmon
param baseurl http://192.168.1.11/tsmon/configs