USE_XRANDR=TRUE
xrandr --output VGA-0 --mode 1920x1080

SCREEN_RESOLUTION="1920x1080"
SCREEN_HORIZSYNC="30-65"
SCREEN_VERTREFRESH="75"

USE_XRANDR=TRUE
xrandr --output VGA-0 --mode 1920x1080

################################################
### --- Thinstation Build Config --- ###
################################################
#
#
# This is Thinstation s basic setup file. In this file you decide which
# hardware, programs and features to be included in the Thinstation
# boot image generated by running "./build".
#
# You can customize/limit the possibilities in the thinstation.conf
# files later.
#
# Anything after a "#" is a comment. You activate "things" by removing
# the "#" and remove "things" by putting a "#" in front of them.
#
# First we define which modules to include. Modules are hardware
# drivers. NEVER include more than necessary - the more modules, the
# longer boot time.

########################################################
### --- Machine Modules to include in boot image --- ###
########################################################
# A machine profile is a set of modules for a specific set of hardware
# components like a thinclient with adapters. It does not include any
# filesystem modules, those need to be selected individualy. Making a
# a machine profile is a two step process. First you will need to make
# an allmodules build like "./build --allmodules" with the extensions-x
# package included. Once the client machine is booted with that image
# you can open and xterm or telnet in and run "hwlister.sh". hwlister.sh
# will compile some lists and attempt to post them to the pxe server assigned
# to the client. If the pxe server is this workstation and you are hosting
# files directly out of this build env, you can then run
# "./mkmachine SOME-MODEL" and the files will be put into the machine folder
# under that model name. Now all you have to do is add a line to this file
# like "machine SOME-MODEL" and you will no longer have to make
# allmodules builds. If this is not the pxe server, you will have to
# move stuff around on your own, but the most important files are
# modules.list and firmware.list.

################################################
### --- Modules to include in boot image --- ###
################################################
# Any modules may be added as "module" or "module_pkg".
# If defined as a "module", the driver is included in the boot image.
# If defined as a "module_pkg", the driver is added from outside the
# image, such as from a tftp server. See note below for more details.
#
# Normally you should use "module". Only use "module_pkg" if you want
# to dynamically load modules.
# Note: If you create a module_pkg network driver, and decide to load it
# from a tftp server, it won t work. This is because the image
# won t have a network driver to get the module_pkg in the first
# place.

#!Hardware
#!!Machine module list
#machine m704 # Gigabyte m704 Rover PC
#machine WYSE9150se # WYSE 9150se Thin Client
#machine NT-A3500 # Foxconn AMD E-350 Barebone
#machine NT-535 # Foxconn Intel D525 Barebone
#machine Dell-FX170 # Dell FX170 D525 Atom Machine
#machine VMWare # A good set of modules for a VmWare Virtual Machine
#machine Virtualbox-4.1 # A good set of modules for a Virtualbox Virtual Machine
#machine VIA-Epia-CLE266 # VIA Epia/Eden based on the the CLE266 chip. Rather common in thin clients a few years old
#machine classic_generic # Big list of modules that you can choose by unremarking them
#machine IGEL-M300C # Igel CX700 Via
#machine HP-t5135 # HP CX700 Via

#!!Wireless Stuff
#package wpa_supplicant
#package wireless
#package wifi-connect
#!!!Misc Modules

#!!Filesystem Support
# Every mounted device needs a filesystem, so choose which ones you need.
module usb-storage
module autofs4 # Automount and autofs support
module isofs # ISO9960 file system support for CDRoms
module udf # CDRom UDF file system support
module vfat # Fat and VFat file system support
module ntfs # NTFS file system support
module ext2 # Ext2 file system support
module ext3 # Ext3 file system support
module ext4 # Ext4 file system support
module nfs # NFS file system support
module cifs # CIFS support (use either this or smbfs - not both)
module squashfs

#################################################
### --- Packages to include in boot image --- ###
#################################################

# A package is a program or utility.
# Any packages may be added as "package" or "pkg".
# If defined as a "package", the program is included in the boot image.
# If defined as a "pkg", the program is added from outside the image.
# Normally, you should use "package". Only use "pkg" if you want to
# dynamically load programs.


# --- Packages to include in boot image
# --- Packages below may be "package" or "pkg"
#!!Miscellaneous
#package hwclock # Utility to set system time from hardware clock (More Complete than whats already in BusyBox)
#package rdate # Utility to obtain date & time from network
package ntp # Utility to obtain date & time from network (only use one of these)
package sound-esd # Enable sound-esd or sound-nasd if you want to be able to control
package sound-nasd # sound on your thin client from another computer or
# your remote session.
package alsa-lib
package alsa-utils
package gnome-media
package gnome-core
#package kismet
#package gst-plugins-base
#package gst-plugins-good
#package crystalhd
#package libva
package iptables # IP Tables support
#package cpufreq
#package cpuspeed
#package wine # Windows Application Execution Platform

#!!X related
# --- XOrg 7.6
#package xorg7-apm
#package xorg7-ark
#package xorg7-chips
#package xorg7-cirrus
#package xorg7-glint
#package xorg7-i128
#package xorg7-mach64
#package xorg7-mga
#package xorg7-neomagic
#package xorg7-r128
#package xorg7-rendition
#package xorg7-s3
#package xorg7-s3virge
#package xorg7-savage
#package xorg7-siliconmotion
#package xorg7-sis
#package xorg7-sisusb
#package xorg7-sun
#package xorg7-tdfx
#package xorg7-tga
#package xorg7-trident
#package xorg7-tseng
#package xorg7-v4l
package xorg7-vesa
#package xorg7-vmware
#package xorg7-ztv
package xorg7-ati
#package xorg7-nv # Xorg driver for legacy nvidia chipsets/instead of vendor driver
package xorg7-nvidia # NVIDIA accelerated vendor driver. Bigger footprint than xorg-nv
#package xorg7-openchrome
#package xorg7-geode
#package xorg7-i740
package xorg7-intel
#package xorg7-fbdev
#package xorg7-tinyx

#!!Locale or localization files for keyboard and fonts. (Language/Country)
#package locale-cs_CZ # Czech
#package locale-da_DK # Danish
#package locale-de_DE # German
#package locale-en_GB # English-Great Britain
package locale-en_US # English-US
#package locale-es_ES # Spanish
#package locale-fi_FI # Finnish
#package locale-fr_BE # French Belgium
#package locale-fr_CA # French Canadian
#package locale-fr_CH # French Switzerland
#package locale-fr_FR # French
#package locale-hr_HR # Croation
#package locale-hu_HU # Hungarian
#package locale-it_IT # Italian
#package locale-ja_JP # Japanese
#package locale-nb_NO # Norwegian (bokmål)
#package locale-pl_PL # Polish
#package locale-pt_PT # Portuguese
#package locale-pt_BR # Portuguese-Brazil
#package locale-ru_RU # Russian
#package locale-sv_SE # Swedish
#package locale-tr_TR # Turkish

#!Applications
#!!Connection Package types. Choose *at least* one!
package freerdp # X RDP Client - fork of rdesktop
#package rdesktop # X RDP client for Windows Terminal Services (ver 1.7)
#package vncviewer # VNC client (vncviewer)
#package xorg7vnc # Remote Control Client Workstation
#package ica # Citrix ICA client support
#package tarantella # Tarantella client support
#package xnest # XDM in a window client
#package urxvt # Light Xterm Client (vt102)
package xterm # Xterm Client (vt220)
#package ssh # Secure Shell client
#package tn5250 # 5250 terminal emulator
#package dillo # Dillo light web browser
#package thinlinc # Cendio ThinLinc client support
#package nx # No Machine NX client
#package 2x # 2X client
#package java # Java runtime
#package firefox_lowmem # Firefox 3 for low resource machines
#package firefox # Firefox current Web Browser
#package chrome # Google Chrome Web Browser
#package kiosk # Rkiosk Plugin for Firefox
#package flash_lowmem # Flash 9 browser plugin for firefox and low resource machines
#package flash # Flash Current
#package filezilla # FileZilla FTP Client for X
#package git # GIT Version Control System
#package giggle # Commit browser for GIT
#package gparted # Gnome Partition Manager
#package open-vm-tools
#package medit # Notepad
#package mplayer # DVD and video player
#package vmview # VMware Open-View Client, no PCoIP
#package xbmc # XBMC Media Center for X
#package xpdf # X PDF Viewer

#!!Window Managers. Choose no more than 1 window manager.
# Not needed if you don t want to manage windows.
#package openbox # A spartin clean/fast window manager.
#package xdesktop-kiosk # A locked down desktop kiosk using the openbox wm (See packages/xdesktop-kiosk/build/conf for
# more help.
#package icewm # "ICEWM" window manager. Makes TS a light workstation.
#package icewm-theme-xp
#package icewm-themes # Extra IceWM themes
#package icewm-theme-bernstein
#package icewm-theme-bluecrux
#package icewm-theme-liquid

#!!Window Manager Utils
#package idle-shutdown # Package that lets you specify automatic shutdown settings and logic.
#package wbar # Adds icons to desktop
#package idesk

#!!Other services
#package www # Web access to client. From a browser: "http://<IP number>"
# The standard page is for general user settings, administrative access
# is on port 6800.
package lp_server # Remote printing daemon (JetDirect compatible)
#package lpr # LPR Print Server, for use with samba-server package
package lprng # LPRng Print Server, supports network based printing
#package sshd # Dropbear secure shell server
#package tftpd # Built in tftpd server. Useful for making a tftpserver
# for thinstation on a WAN over a slow link.
#package samba-server # Samba server FS Support, allows you to share
# local floppy/cdrom/hd/printer to other Windows
# PCs. Needs supermount for removeable media.
#package samba-client # Samba smbclient, gives a shell like environment to access an samba server
#package hdupdate # Package for updating TS images on a hardisk over a network connection
#package scp # Add ability to download files over internet using scp. This package
# adds some networking based options for downloading configuration files or
# in using hdupdate package.
#package openvpn # OpenVPN Client Support


#!!PCSCD Card Readers
#package gemplus410 # Card reader Gemplus 410 (Serial) and Gemplus 430 (USB)
#package ccidreader # Generic USB card reader


#!!Miscellaneous
#package gtk-2.0 # Full gtk-2.0 plus clearlooks theme #size
#package icons-cursor # Anti Aliased Mouse Cursor Theme
#package icons-hicolor # Hi-Color icons for some applications and themes.
#package fonts-misc
#package fonts-jis-misc # Japanese Industrial
#package fonts-util
#package fonts-cyrillic
#package fonts-Speedo-Bitstream
#package fonts-TTF-BH # This one works nicely most of the time and is small.
#package fonts-TTF-vera
#package fonts-75dpi-Adobe
#package fonts-75dpi-Adobe-Utopia
#package fonts-75dpi-BH
#package fonts-75dpi-BH-Typewriter
#package fonts-75dpi-Bitstream
#package fonts-100dpi-Adobe
#package fonts-100dpi-Adobe-Utopia
#package fonts-100dpi-BH
#package fonts-100dpi-BH-Typewriter
#package fonts-100dpi-Bitstream
#package fonts-Type1-Adobe-Utopia
#package fonts-Type1-BH
#package fonts-Type1-Bitstream
#package fonts-Type1-IBM
#package fonts-Type1-xfree86
#package lshw # list hardware
#package e3 # Basic vi like Editor
#package rox # Basic File Manager
#package debug # metapackage to include other debugging packages and stop during bootup to check things.
package extensions # Adds various shell commands, will increase image size.
package dbus # Попытка уменьшить размер образа
package extensions-x # Adds various utility s for the X Environment !!!! INCLUDES hwlister.sh !!!! #size
#package eGalax # eGalax TouchKit Drivers/Utility for serial and usb touchscreens by EETI.
#package installer # Wipes a drive, makes partitions and downloads thinstation from a pxe server
#package devstation # Starts a tftp server that hosts files from the boot-images/pxe folder

# Parameters
########################################
### --- Miscellaneous Parameters --- ###
########################################
#!!Basic

#param fastboot true # Mangles the filesystem a special way as to improve boot spead and reduce
# memory utilization. Cool/Dangerous . Harder to dubug other packages. (Finishing Touch)
# Set to 'true' to enable or 'lotsofmem' for slightly slower booting but no squash lag on app launch.
param rootpasswd 12345 # Do Change! Console/telnet password for root
# If this is enabled, Telnetd will be enabled.
#param xorgvncpasswd 0123456789 # VNC Access Password
param storagepasswd 12345 # Password for storage server
param dialuppasswd 12345 # Password for dialin account
param sambapasswd 12345 # Password for samba shares when using user mode security
#param kernelcmdline "radeon.modeset=0" # Add additional kernel command lines. e.g. disable radeon framebuffer
#param stripelf yes # Strip extraneous information from elf binaries (Maybe not Safe)
#param acpisupport disable # Tells the kernel not to load acpi modules. (Breaks some Intel Chipsets if disabled)
#param uvesafb disable # Disable uvesafb (legacy option like modesetfb)
#param extra_vid LVDS-1:d # Add an extra video= parameter to kernel cmd line (good for disabling outputs on video cards)
param bootlogo true # Enable or Disable the use of the Boot splash.
param boottheme default # Backgound picture during boot
#param splash verbose # kernel splash setting (0=off, silent or verbose (default=silent)
param splash silent
param fbmtrr 0 # MTRR value for uvesafb (default = 0, 4 is the best) grep your log to make sure you have not set it to high
#param fbnocrtc true # This is usually a good thing.
param fbsm ywrap # Window scrolling method (redraw, ypan, ywrap) ywrap is best, but may not work correctly for all people
#param fbvtotal 16 # Override Video Bios Reported Memory in MB
#param fbmaxhf 67 # Override Video Negotiated Max Horizontal Frequency
#param fbmaxvf 61 # Override Video Negotiated Max Vertical Frequency
#param fbmaxclk 155 # Override Video Negotiated Max Clock Frequency
#param fbnoedid true # Don t do video edid
#param bootresolution 1024x600-32 # Resolution used during Thinstation boot.
param bootresolution 1024x768-32 # You can wright your own resolution mode here, if you know it.
#param bootresolution 1366x768-32 # Otherwise, you may want to refer to the vbe_modes.list you created with hwlister.sh
#param bootresolution 1280x1024-32 # for modes that your card supports.
#param bootresolution 1400x900-32 # It is also used by xrandr if no xrandr options are specified.
#param bootresolution 1680x1050-32
#param bootresolution 1920x1080-32
#param bootresolution 1400x1050-32

#param desktop file:./backgrounds/Hive_Lite.jpg # Custom image to load as desktop background
param defaultconfig thinstation.conf.buildtime # The file with default setup. No other config file is found
# during boot.
param basename thinstation # Used for all config/tftp/scp file names
param basepath . # Used to determine path to tftp/scp files
param baseurl www.doncuppjr.net # Used to determine url to wget files
#param keyfile ./id_rsa # Path for private key file used for ssh/scp
#param knownhosts ./known_hosts # Path for ssh known_hosts file for ssh/scp
#param localpkgs false # to determine is PKG files are to be loaded locally
param fulllocales true # Use full locale support for packages
#param icaencryption false # Use ica encryption support, add 290k to image
param haltonerror false # Will halt on error, default is true
param initrdcmd "gzip -9" # Compression mode and level of initrd file. none, gzip -9, lzma -9 ,bzip2 -9
param bootverbosity 3 # Increased vebosity when booting TS
# 0 no verbose messages
# 1 boot
# 2 network
# 4 init
# 8 kernel
# 16 modules
# 32 packages
# 64 email bootlog file to SMTP server & user set in
# thinstation.conf file. This will only work
# if networking is working.
#
# Combinations can be used (e.g.12 does Kernel and Module Messages)

#!!Advanced
# Leave this alone unless you can t download (wget required on your Linux box):
#param icaurl file://home/installs/linuxx86_12.1.0.203066.tar.gz
#param firefoxurl thinstation.org/download/firefox/firefox-12.x-current.tar.bz2
#param firefox_lowmemurl thinstation.org/download/firefox/firefox-3.x-current.tar.bz2
#param flashurl www.thinstation.org/download/flash/insta..._11.x-current.tar.gz
#param flash_lowmemurl www.thinstation.org/download/flash/insta...layer_9_linux.tar.gz
#param thinlincurl www.cendio.com/downloads/clients/tl-late...t-thinstation.tar.gz
#param nxurl thinstation.org/download/nx/nxclient-3.x-current.i386.tar.gz
#param 2xurl www.2x.com/downloads/AppServer-LoadBalancer/2XClient.tar.bz2
#param javaurl javadl.sun.com/webapps/download/AutoDL?BundleId=49015
#param tarantellaurl file://home/installs/tnci3li.tar
#param chromeurl dl.google.com/linux/direct/google-chrome...ble_current_i386.deb
#param eGalaxurl 210.64.17.162/web20/drivers/touch_driver....6014-32b-k26.tar.gz
#param httpproxy http://192.168.1.2:8080

#param bootfssize 50% # Modify the size of the tmpfs filesystem

#param livecd true # Adds a multi-resolution boot menu to cd images.
#package alltimezone
#package allres # Includes a lot of resolution splash images for live-cd s
#package allfirmware # Includes a lot of firmwares for live-cd s

SCREEN=0
WORKSPACE=1

SESSION_0_TITLE="DATSERV FREERDP TERMINAL"
SESSION_0_TYPE=freerdp
SESSION_0_SCREEN=1
SESSION_0_FREERDP_SERVER=19.18.0.3
SESSION_0_FREERDP_OPTIONS="-u пользователь -p пароль -a 24 -x -o --plugin rdpsnd --data alsa -- --plugin drdynvc --data audin --"

...
Building dependencies for Modules...

warning: output VGA-0 not found; ignoring

Setting Zone Info File to America/Los_Angeles

Building Sample Thinstation.conf File
...

#!!X related
# --- XOrg 7.6
#package xorg7-apm
#package xorg7-ark
#package xorg7-chips
#package xorg7-cirrus
#package xorg7-glint
#package xorg7-i128
#package xorg7-mach64
#package xorg7-mga
#package xorg7-neomagic
#package xorg7-r128
#package xorg7-rendition
#package xorg7-s3
#package xorg7-s3virge
#package xorg7-savage
#package xorg7-siliconmotion
#package xorg7-sis
#package xorg7-sisusb
#package xorg7-sun
#package xorg7-tdfx
#package xorg7-tga
#package xorg7-trident
#package xorg7-tseng
#package xorg7-v4l
package xorg7-vesa
#package xorg7-vmware
#package xorg7-ztv
package xorg7-ati
#package xorg7-nv # Xorg driver for legacy nvidia chipsets/instead of vendor driver
package xorg7-nvidia # NVIDIA accelerated vendor driver. Bigger footprint than xorg-nv
#package xorg7-openchrome
#package xorg7-geode
#package xorg7-i740
package xorg7-intel
#package xorg7-fbdev
#package xorg7-tinyx

#! /bin/sh

. $TS_GLOBAL
PID=$$

if [ -e /etc/$PACKAGE.functions ] ; then . /etc/$PACKAGE.functions ; fi
if [ ! -e /etc/cmd/$PACKAGE.wm ] ; then if [ -n "$WMNAME" ] ; then . /etc/$WMNAME.functions ;fi ;fi

pkg_set_init_flag $PACKAGE

if [ "$SERVER" == "." ] ; then SERVER="" ; fi
if [ "$OPTIONS" == "." ] ; then OPTIONS="" ; fi

# getfreescreen must be called before $PACKAGE.* because XNEST_NUMBER has to be defined before
if [ "$PACKAGE" = "xnest" ] ; then getfreescreen ; fi

if [ -e /etc/cmd/$PACKAGE.console ] ; then . /etc/cmd/$PACKAGE.console ; fi
if [ -e /etc/cmd/$PACKAGE.window ] ; then . /etc/cmd/$PACKAGE.window ; fi
if [ -e /etc/cmd/$PACKAGE.menu ] ; then . /etc/cmd/$PACKAGE.menu ; fi
if [ -e /etc/cmd/$PACKAGE.fullscreen ] ; then . /etc/cmd/$PACKAGE.fullscreen ; fi
if [ -e /etc/cmd/$PACKAGE.global ] ; then . /etc/cmd/$PACKAGE.global ; fi

if [ -z "$CMD_CONSOLE" ] ; then CMD_CONSOLE=$CMD_GLOBAL ; fi
if [ -z "$CMD_WINDOW" ] ; then CMD_WINDOW=$CMD_GLOBAL ; fi
if [ -z "$CMD_MENU" ] ; then CMD_MENU=$CMD_GLOBAL ; fi
if [ -z "$CMD_FULLSCREEN" ] ; then CMD_FULLSCREEN=$CMD_GLOBAL ; fi

if [ -e /etc/cmd/$PACKAGE.getip ] ; then CMD_GETIP=TRUE; fi
if [ -e /etc/cmd/$PACKAGE.wm ] ; then wm_menu; fi

if [ -e /etc/cmd/$PACKAGE.change_server_type ] ; then SERVER="\"$2\"" ; elif [ ! -z "$2" ] ; then SERVER=$2 ; fi
if [ ! -z "$3" ] ; then OPTIONS=$3 ; fi
if [ -e /etc/cmd/$PACKAGE.server_first ] ; then REVERSE_ORDER=TRUE ; fi

console_get_ip()
{
if is_enabled $CMD_GETIP ; then
if [ -z "$SERVER" ]; then
replimenu -c $MENUCOLOUR -f $REPLIMENU/server.menu
. /tmp/RM_SERVER
sleep .2
rm /tmp/RM_SERVER
else
RM_SERVER=$2
fi
SERVER=$RM_SERVER
fi
}

x_get_ip()
{
if is_enabled $CMD_GETIP ; then
while is_enabled $ALWAYS_ENTER_SERVER || [ -z "$SERVER" ] ; do
dialog_get_server_address $PACKAGE
local ALWAYS_ENTER_SERVER=DONE
if [ -z "$SERVER" ] && is_enabled $ALLOW_EXIT ; then
exit
elif [ -z "$SERVER" ]; then
dialog_no_value
fi
done
fi
}

order_command()
{
if is_enabled $REVERSE_ORDER ; then
ORDERED_COMMAND="$SERVER $OPTIONS"
else
ORDERED_COMMAND="$OPTIONS $SERVER"
fi
}

run_command()
{
echo $CMD > /tmp/CMD$PID
if [ -e /tmp/CMD$PID ] ; then
if is_enabled $LOG_COMMANDS ; then
cat /tmp/CMD$PID >> $LOGFILE
fi
. /tmp/CMD$PID >> $LOGFILE 2>&1 &
sleep .3
rm /tmp/CMD$PID
fi
}

case "$1" in
auto)
while [ "$reconnect" != "1" ]; do
echo "Running Auto $PACKAGE" >> $LOGFILE
x_get_ip
order_command
CMD="$CMD_CONSOLE $ORDERED_COMMAND"
wm_workspaces "$CMD" $4
run_command
use_xrandr #mongol
wait
check_NX
check_reboot
check_reconnect
done
$NO_SESSION
;;
menu)
echo "Running Menu $PACKAGE" >> $LOGFILE
console_get_ip
order_command
touch /tmp/X_TERMINATE # Set flag to terminate X-Server when user exits
start_x
free_memory
rm /tmp/X_TERMINATE
# Set flag to regenerate replimenu on session exit
if [ -n "$SESSION_NUMBER" ] ; then
session=/var/sessions/SESSION$SESSION_NUMBER
CMD="(kill \`pidof replimenu\` ; touch $session ; $CMD_MENU $3 $SERVER ; rm $session ;
kill \`pidof replimenu\` ; sed_file $TS_CUSTOM '/^SESSION_'$SESSION_NUMBER'_/d' )"
else
CMD="$CMD_MENU $ORDERED_COMMAND"
fi
run_command
x_mouse
x_mod_map
x_numlock
vm_agent
;;
console)
echo "Running Console $PACKAGE" >> $LOGFILE
start_x
free_memory
x_get_ip
order_command
CMD="$CMD_CONSOLE $ORDERED_COMMAND"
while [ -e /tmp/.X11-unix/X$DISPLAY_NUMBER ] && [ "$reconnect" != "1" ]; do
run_command
x_mouse
x_mod_map
x_numlock
vm_agent
wait
check_NX
check_xrunning
check_reboot
check_reconnect
done
$NO_SESSION
;;
window|fullscreen)
echo "Running $1 $PACKAGE" >> $LOGFILE
local ALLOW_EXIT=TRUE
if ! is_disabled $ALWAYS_ENTER_SERVER ; then
local ALWAYS_ENTER_SERVER=TRUE
fi
x_get_ip
order_command
CMD='$'CMD_`make_caps $1`' '$ORDERED_COMMAND
run_command
use_xrandr #mongol
;;
help)
echo "Usage: $0 {console|menu|window|fullscreen} [server] [options]"
;;
*)
exit 1
;;
esac

exit 0