################################################
### --- Thinstation Build Config --- ###
################################################
#
#
# This is Thinstation s basic setup file. In this file you decide which
# hardware, programs and features to be included in the Thinstation
# boot image generated by running "./build".
#
# You can customize/limit the possibilities in the thinstation.conf
# files later.
#
# Anything after a "#" is a comment. You activate "things" by removing
# the "#" and remove "things" by putting a "#" in front of them.
#
# First we define which modules to include. Modules are hardware
# drivers. NEVER include more than necessary - the more modules, the
# longer boot time.
########################################################
### --- Machine Modules to include in boot image --- ###
########################################################
# A machine profile is a set of modules for a specific set of hardware
# components like a thinclient with adapters. It does not include any
# filesystem modules, those need to be selected individualy. Making a
# a machine profile is a two step process. First you will need to make
# an allmodules build like "./build --allmodules" with the extensions-x
# package included. Once the client machine is booted with that image
# you can open and xterm or telnet in and run "hwlister.sh". hwlister.sh
# will compile some lists and attempt to post them to the pxe server assigned
# to the client. If the pxe server is this workstation and you are hosting
# files directly out of this build env, you can then run
# "./mkmachine SOME-MODEL" and the files will be put into the machine folder
# under that model name. Now all you have to do is add a line to this file
# like "machine SOME-MODEL" and you will no longer have to make
# allmodules builds. If this is not the pxe server, you will have to
# move stuff around on your own, but the most important files are
# modules.list and firmware.list.
################################################
### --- Modules to include in boot image --- ###
################################################
# Any modules may be added as "module" or "module_pkg".
# If defined as a "module", the driver is included in the boot image.
# If defined as a "module_pkg", the driver is added from outside the
# image, such as from a tftp server. See note below for more details.
#
# Normally you should use "module". Only use "module_pkg" if you want
# to dynamically load modules.
# Note: If you create a module_pkg network driver, and decide to load it
# from a tftp server, it won t work. This is because the image
# won t have a network driver to get the module_pkg in the first
# place.
#!Hardware
#!!Machine module list
#machine m704 # Gigabyte m704 Rover PC
#machine WYSE9150se # WYSE 9150se Thin Client
#machine NT-A3500 # Foxconn AMD E-350 Barebone
#machine NT-535 # Foxconn Intel D525 Barebone
#machine Dell-FX170 # Dell FX170 D525 Atom Machine
#machine VMWare # A good set of modules for a VmWare Virtual Machine
#machine Virtualbox-4.1 # A good set of modules for a Virtualbox Virtual Machine
#machine qemu # A good set of modules for qemu
#machine VIA-Epia-CLE266 # VIA Epia/Eden based on the the CLE266 chip. Rather common in thin clients a few years old
#machine classic_generic # Big list of modules that you can choose by unremarking them
#machine IGEL-M300C # Igel CX700 Via
#machine HP-t5135 # HP CX700 Via
#machine HP-t620 #HP t620 Thin Client
#machine foxconn-nT-330i # Foxconn nT 330i Barebone
#machine foxconn-nT-435 # Foxconn nT 435 Barebone
#machine foxconn-nT-535 # Foxconn nT 535 Barebone
#machine foxconn-nT-A3800 # Foxconn nT A3800 Barebone
#machine foxconn-nT-i2847 # Foxconn nT i2847 Barebone
#machine foxconn-nT-iBT18 # Foxconn nT iBT18 Barebone
#machine foxconn-nT-n270 # Foxconn nT n270 Barebone
#machine Acer-Revo-M1-601 # Acer Revo M1-601
#machine Lenovo-T420s # Lenovo T420s Laptop
#machine Lenovo-T430s # Lenovo T430s Laptop
#!!Wireless Stuff
#package wpa_supplicant
#package wireless
#package wifi-connect
#!!!Misc Modules
#!!Filesystem Support
# Every mounted device needs a filesystem, so choose which ones you need.
module usb-storage
#module autofs4 # Automount and autofs support
module isofs # ISO9960 file system support for CDRoms
module udf # CDRom UDF file system support
module vfat # Fat and VFat file system support
#module ntfs # NTFS file system support
#module ext2 # Ext2 file system support
#module ext3 # Ext3 file system support
module ext4 # Ext4 file system support
#module nfs # NFS file system support
#module cifs # CIFS support (use either this or smbfs - not both)
#################################################
### --- Packages to include in boot image --- ###
#################################################
# A package is a program or utility.
# Any packages may be added as "package" or "pkg".
# If defined as a "package", the program is included in the boot image.
# If defined as a "pkg", the program is added from outside the image.
# Normally, you should use "package". Only use "pkg" if you want to
# dynamically load programs.
# --- Packages to include in boot image
# --- Packages below may be "package" or "pkg"
#!!Miscellaneous
#package overlayfs # This is needed in order for squashfs compression mode to work.
package ts-classic # The classic ts logic for network/netfiles/hostname/mounting/telnetd/telnet/playcd
#package automount
#package netfiles # Adds only this package instead of the whole ts-classic. netfiles lets you get thinstation.conf.xxx files
# from the TFTP-server
#package udisks
#package networkmanager
#package udisks-glue
package ntp # Utility to obtain date & time from network
#package sound-esd # Enable sound-esd or sound-nasd if you want to be able to control
#package sound-nasd # sound on your thin client from another computer or
# your remote session.
#package alsa
#package pulseaudio #Enable Pulse Audio Server. Required for Skype Virtualisation Pack in Horizon View Client 4.5+
#package gnome-media
package gnome-network-properties
package gnome-core
package volumeicon
#package kismet
#package gst-plugins-base
#package gst-plugins-good
#package crystalhd
#package libva
#package iptables # IP Tables support
#package cpufreq
#package cpuspeed
#package wine # Windows Application Execution Platform
#!!X related
# --- XOrg 7.7
#package xorg7-v4l
package xorg7-vesa #A fallback driver that works with almost everything. Does allow resolution changes
#package xorg7-vmware
#package xorg7-ati #ATI video driver for most modern ATI chipsets. Usually requires several firmwares
#package xorg7-nouveau #New opensource nvidia driver
#package xorg7_nvidia #Proprietary nvidia driver
#package xorg7_nvidia_64 # Additional 64bit module
package xorg7-openchrome #Via Video Chipsets driver
#package xorg7-intel #Intel video driver for most modern chipsets except the GMA3500/3600
#package xorg7-qxl #QEMU video driver
package xorg7-sis
#!!Locale or localization files for keyboard and fonts. (Language/Country)
#package locale-cs_CZ # Czech
#package locale-da_DK # Danish
#package locale-de_DE # German
#package locale-en_GB # English-Great Britain
package locale-en_US # English-US
#package locale-es_ES # Spanish
#package locale-fi_FI # Finnish
#package locale-fr_BE # French Belgium
#package locale-fr_CA # French Canadian
#package locale-fr_CH # French Switzerland
#package locale-fr_FR # French
#package locale-hr_HR # Croation
#package locale-hu_HU # Hungarian
#package locale-it_IT # Italian
#package locale-ja_JP # Japanese
#package locale-nb_NO # Norwegian (bokmål)
#package locale-pl_PL # Polish
#package locale-pt_PT # Portuguese
#package locale-pt_BR # Portuguese-Brazil
#package locale-ru_RU # Russian
#package locale-sv_SE # Swedish
#package locale-tr_TR # Turkish
#package locale-uk_UA # Ukrainian
#!Applications
#!!Connection Package types. Choose *at least* one!
package freerdp # X RDP Client - fork of rdesktop
package rdesktop # X RDP client for Windows Terminal Services (ver 1.7)
package vncviewer # VNC client (vncviewer)
#package xorg7vnc # Remote Control Client Workstation
#package ica # Citrix ICA client support
#package tarantella # Tarantella client support
#package xnest # XDM in a window client
#package urxvt # Light Xterm Client (vt102)
#package xterm # Xterm Client (vt220)
package ssh # Secure Shell client
#package tn5250 # 5250 terminal emulator
#package dillo # Dillo light web browser
#package thinlinc # Cendio ThinLinc client support
#package nx # No Machine NX client
#package 2x # 2X client
#package java # Java runtime
#package firefox_lowmem # Firefox 3 for low resource machines
#package firefox # Firefox current Web Browser
#package chrome # Google Chrome Web Browser
#package chromium # Chromium Web Browser
#package kiosk # Rkiosk Plugin for Firefox
#package flash_lowmem # Flash 9 browser plugin for firefox and low resource machines
#package flash # Flash Current
#package filezilla # FileZilla FTP Client for X
#package git # GIT Version Control System
#package gparted # Gnome Partition Manager
#package open-vm-tools
#package vboxguest
#package medit # Notepad
#package mplayer # DVD and video player
#package vmview # VMware Open-View Client, PCOIP
#package xbmc # XBMC Media Center for X
#package evince # X PDF Viewer
#!!Window Managers. Choose no more than 1 window manager.
# Not needed if you don t want to manage windows.
#package openbox # A spartin clean/fast window manager.
#package xdesktop-kiosk # A locked down desktop kiosk using the openbox wm (See packages/xdesktop-kiosk/build/conf for
# more help.
#package icewm # "ICEWM" window manager. Makes TS a light workstation.
#package icewm-theme-xp
#package icewm-themes # Extra IceWM themes
#package icewm-theme-bernstein
#package icewm-theme-bluecrux
#package icewm-theme-liquid
package xfwm4
#package xfwm4-extra
package xfce4-power-manager
package terminal # Terminal emulator for xfwm4 -- Pulls in xfwm4
package thunar # File Manager for xfwm4 -- Pulls in xfwm4
#!!Window Manager Utils
#package idle-shutdown # Package that lets you specify automatic shutdown settings and logic.
#package wbar # Adds icons to desktop
#package idesk
#!!Other services
#package www # Web access to client. From a browser: "http://<IP number>"
# The standard page is for general user settings, administrative access
# is on port 6800.
package lp_server # Remote printing daemon (JetDirect compatible)
#package lpr # LPR Print Server, for use with samba-server package
#package lprng # LPRng Print Server, supports network based printing
#package cups
package sshd # Dropbear secure shell server
#package tftpd # Built in tftpd server. Useful for making a tftpserver
# for thinstation on a WAN over a slow link.
#package samba-server # Samba server FS Support, allows you to share
# local floppy/cdrom/hd/printer to other Windows
# PCs. Needs supermount for removeable media.
#package samba-client # Samba smbclient, gives a shell like environment to access an samba server
#package hdupdate # Package for updating TS images on a hardisk over a network connection
#package scp # Add ability to download files over internet using scp. This package
# adds some networking based options for downloading configuration files or
# in using hdupdate package.
#package openvpn # OpenVPN Client Support
#!!PCSCD Card Readers
#package gemplus410 # Card reader Gemplus 410 (Serial) and Gemplus 430 (USB)
#package ccidreader # Generic USB card reader
#!!Miscellaneous
#package gtk-2.0 # Full gtk-2.0 plus clearlooks theme
#package icons-cursor # Anti Aliased Mouse Cursor Theme
#package icons-hicolor # Hi-Color icons for some applications and themes. Does not really contain any icons.
#package icons-gnome # gnome Hi-Color icons theme. Needed by most other icon themes.
#package icons-tango # tango Hi-Color icons theme
#package icons-neu # neu Hi-Color icons theme
#package fonts-misc
#package fonts-jis-misc # Japanese Industrial
#package fonts-util
#package fonts-cyrillic
#package fonts-Speedo-Bitstream
#package fonts-TTF-BH # This one works nicely most of the time and is small.
#package fonts-TTF-vera
#package fonts-TTF-MS # Fonts for rendering documents developed on the MS Platform.
# Might want to talk to a lawyer before using these.
#package fonts-TTF-liberation
#package fonts-75dpi-Adobe
#package fonts-75dpi-Adobe-Utopia
#package fonts-75dpi-BH
#package fonts-75dpi-BH-Typewriter
#package fonts-75dpi-Bitstream
#package fonts-100dpi-Adobe
#package fonts-100dpi-Adobe-Utopia
#package fonts-100dpi-BH
#package fonts-100dpi-BH-Typewriter
#package fonts-100dpi-Bitstream
#package fonts-Type1-Adobe-Utopia
#package fonts-Type1-BH
#package fonts-Type1-Bitstream
#package fonts-Type1-IBM
#package fonts-Type1-xfree86
#package lshw # list hardware
#package e3 # Basic vi like Editor
#package rox # Basic File Manager
#package debug # metapackage to include other debugging packages and stop during bootup to check things.
#package extensions # Adds various shell commands, will increase image size.
#package extensions-x # Adds various utility s for the X Environment !!!! INCLUDES hwlister.sh !!!!
#package eGalax # eGalax TouchKit Drivers/Utility for serial and usb touchscreens by EETI.
#package installer # Wipes a drive, makes partitions and downloads thinstation from a pxe server
#package devstation # Starts a tftp server that hosts files from the boot-images/pxe folder
#package ca-bundle # Adds many standard SSL and PKI root certificats. Include this package if you have issues with certificate trusts.
#package set-resolution # Allows the user to change the resolution via the start-menu.
#package local-install # Makes it possible to install Thinstation locally on the machine but still have a central image
# management via automatic updates and version control when the client boots. For more information
# see /ts/build/Documentation/README.local-install and /ts/build/thinstation.conf.sample
# (generated during first build)
#package custom-idle # Shuts down the client based after X minutes if some applications/sessions are not running.
#package custom-background # Allows you to dynamically set a diffrent background in the conf-files when the client boots.
# For example have a background-image in the build with an error-message and then in
# thinstation.conf.network set the "regular" background. This way the user will receive an
# error message on the screen if the client was unable to get the config files from the
# Web- or TFTP-server when it booted.
#package hdd-spindown # Sets hard drives into sleep mode (spin down) when they are idle. See thinstation.conf.sample for info.
#package openssl # Probably needed by the Citrix Receiver 13.2 version.
# Parameters
########################################
### --- Miscellaneous Parameters --- ###
########################################
#!!Basic
#param fastboot true # Mangles the filesystem a special way as to improve boot spead and reduce
# memory utilization. Cool/Dangerous . Harder to dubug other packages. (Finishing Touch)
# Set to 'true' to enable or 'lotsofmem' for slightly slower booting but no squash lag on app launch.
#param tsuser tsuser # Name of the user that thinstation will run as. Needs userauto package.
#param tsuserpasswd pleasechangeme # Do Change! Console/telnet password for non-root
param rootpasswd pleasechangeme # Do Change! Console/telnet password for root
# If this is enabled, Telnetd will be enabled.
param xorgvncpasswd pleasechangeme # VNC Access Password
param storagepasswd pleasechangeme # Password for storage server
param dialuppasswd pleasechangeme # Password for dialin account
param sambapasswd pleasechangeme # Password for samba shares when using user mode security
#param kernelcmdline "radeon.modeset=0" # Add additional kernel command lines. e.g. disable radeon framebuffer
#param stripelf yes # Strip extraneous information from elf binaries (Maybe not Safe)
#param acpisupport disable # Tells the kernel not to load acpi modules. (Breaks some Intel Chipsets if disabled)
#param uvesafb disable # Disable uvesafb (legacy option like modesetfb)
#param extra_vid LVDS-1:d # Add an extra video= parameter to kernel cmd line (good for disabling outputs on video cards)
param bootlogo true # Enable or Disable the use of the Boot splash.
param boottheme default # Backgound picture during boot
#param splash verbose # kernel splash setting (0=off, silent or verbose (default=silent)
param splash silent
param fbmtrr 0 # MTRR value for uvesafb (default = 0, 4 is the best) grep your log to make sure you have not set it to high
#param fbnocrtc true # This is usually a good thing.
param fbsm ywrap # Window scrolling method (redraw, ypan, ywrap) ywrap is best, but may not work correctly for all people
#param fbvtotal 16 # Override Video Bios Reported Memory in MB
#param fbmaxhf 67 # Override Video Negotiated Max Horizontal Frequency
#param fbmaxvf 61 # Override Video Negotiated Max Vertical Frequency
#param fbmaxclk 155 # Override Video Negotiated Max Clock Frequency
#param fbnoedid true # Don t do video edid
#param bootresolution 1024x600-32 # Resolution used during Thinstation boot.
#param bootresolution 1024x768-32 # You can wright your own resolution mode here, if you know it.
#param bootresolution 1152x864-32
#param bootresolution 1280x768-32
#param bootresolution 1366x768-32 # Otherwise, you may want to refer to the vbe_modes.list you created with hwlister.sh
#param bootresolution 1280x1024-32 # for modes that your card supports.
#param bootresolution 1400x900-32 # It is also used by xrandr if no xrandr options are specified.
#param bootresolution 1680x1050-32
#param bootresolution 1920x1080-32
#param bootresolution 1400x1050-32
#param bootresolution 1920x1200-32
#param desktop file:./backgrounds/Hive_Lite.jpg # Custom image to load as desktop background
param defaultconfig thinstation.conf.buildtime # The file with default setup. No other config file is found
# during boot.
param basename thinstation # Used for all config/tftp/scp file names
param basepath config # Used to determine path to tftp/scp files
param baseurl
www.doncuppjr.net # Used to determine url to wget files
#param baseurl http://192.168.78.17 # Used to determine url to wget/http files - your local web server
#param baseurl 'http://${SERVER_IP}' # Used to determine url to wget/http files - if you wan't to use a web server on the same server as the TFTP server
#param keyfile ./id_rsa # Path for private key file used for ssh/scp
#param knownhosts ./known_hosts # Path for ssh known_hosts file for ssh/scp
#param localpkgs false # to determine is PKG files are to be loaded locally
param fulllocales true # Use full locale support for packages
#param icaencryption false # Use ica encryption support, add 290k to image
param haltonerror false # Will halt on error, default is true
param hardlinkfs true
param sametimestmp true # When enabled, the timestamps for all files and folders will be set to 00:00 of todays date in your timezone
param initrdcmd "gzip -9" # Compression mode and level of initrd file. none, gzip -9,lzma -9 ,bzip2 -9
param bootverbosity 33 # Increased vebosity when booting TS
# 0 no verbose messages
# 1 boot
# 2 network
# 4 init
# 8 kernel
# 16 modules
# 32 packages
# 64 email bootlog file to SMTP server & user set in
# thinstation.conf file. This will only work
# if networking is working.
#
# Combinations can be used (e.g. 24 does Kernel and Module Messages)
#!!Advanced
# Leave this alone unless you can t download (wget required on your Linux box):
param downloads /downloads
param bootimages "iso pxe"
#param bootserver "192.168.1.1" # Used for the pxe image config files to specify where to download
# the syslinux image from. Result is generated in
# /ts/build/boot-images/pxe/boot/lpxelinux/pxelinux.cfg/default
# so that you can specify APPEND initrd=http://<bootserver>/boot/initrd
param syslinuxtheme "default"
#param httpproxy http://192.168.1.2:8080
#param bootfssize 50% # Modify the size of the tmpfs filesystem
#package alltimezone
param allres true # Includes a lot of resolution splash images for live-cd s
param allfirmware true # Includes a lot of firmwares for live-cd s
param earlymicrocode false # Builds microcode initramfs for early loading
# by kernel. Needs kernel with MICROCODE_EARLY=y.
param blacklist snd-pcsp.ko
на форуме которого я нашел много полезных советов (it-advisor.ru/component/content/article/...7-sborka-paketa.html). 
