Добро пожаловать,
Гость
|
Отключите пожалуйста ADblock, если включен...
ТЕМА: Проблемы с железом
Re: Проблемы с железом 21 Фев 2013 17:15 #593
|
Пока нет.
Персобираю) Кое-что поковырял и испортил( |
Администратор запретил публиковать записи гостям.
|
Re: Проблемы с железом 21 Фев 2013 17:31 #594
|
NET_FILE_ENABLED=Off Не помогло.на NET_FILE_ENABLED=On NET_USE=BOTH
NET_USE_DHCP=on
NET_HOSTNAME=ts_*
NET_FILE_ENABLED=On
NET_TELNETD_ENABLED=ON Т.е. не завгружается автоматом (и никак вообще) терминал. хотя, в файле на серваке thinstation.conf-юзер написано: SESSION_0_TYPE=rdesktop
SESSION_0_SCREEN=1
SESSION_0_RDESKTOP_SERVER=192.168.0.3
SESSION_0_RDESKTOP_OPTIONS="-u 'terminal10' -p '12345' -a 16" package rdesktop # X RDP client for Windows Terminal Services Запустил в десктопе Thinstation эмулятор терминала и написал: ping 192.168.0.3 Получил ошибку: Network is untechable Получается, что Thinstation не видит сетку или дров на нее. Я так понял. Хочу отметить, что Thinstation будет исопльзоваться на 10-ти разных машинах, поэтому, дрова нужны разные. Вот мои файлы: build.conf ВНИМАНИЕ: Спойлер! [ Нажмите, чтобы развернуть ][ Нажмите, чтобы скрыть ] ################################################ ### --- Thinstation Build Config --- ### ################################################ # # # This is Thinstation s basic setup file. In this file you decide which # hardware, programs and features to be included in the Thinstation # boot image generated by running "./build". # # You can customize/limit the possibilities in the thinstation.conf # files later. # # Anything after a "#" is a comment. You activate "things" by removing # the "#" and remove "things" by putting a "#" in front of them. # # First we define which modules to include. Modules are hardware # drivers. NEVER include more than necessary - the more modules, the # longer boot time. ######################################################## ### --- Machine Modules to include in boot image --- ### ######################################################## # A machine profile is a set of modules for a specific set of hardware # components like a thinclient with adapters. It does not include any # filesystem modules, those need to be selected individualy. Making a # a machine profile is a two step process. First you will need to make # an allmodules build like "./build --allmodules" with the extensions-x # package included. Once the client machine is booted with that image # you can open and xterm or telnet in and run "hwlister.sh". hwlister.sh # will compile some lists and attempt to post them to the pxe server assigned # to the client. If the pxe server is this workstation and you are hosting # files directly out of this build env, you can then run # "./mkmachine SOME-MODEL" and the files will be put into the machine folder # under that model name. Now all you have to do is add a line to this file # like "machine SOME-MODEL" and you will no longer have to make # allmodules builds. If this is not the pxe server, you will have to # move stuff around on your own, but the most important files are # modules.list and firmware.list. ################################################ ### --- Modules to include in boot image --- ### ################################################ # Any modules may be added as "module" or "module_pkg". # If defined as a "module", the driver is included in the boot image. # If defined as a "module_pkg", the driver is added from outside the # image, such as from a tftp server. See note below for more details. # # Normally you should use "module". Only use "module_pkg" if you want # to dynamically load modules. # Note: If you create a module_pkg network driver, and decide to load it # from a tftp server, it won t work. This is because the image # won t have a network driver to get the module_pkg in the first # place. #!Hardware #!!Machine module list #machine m704 # Gigabyte m704 Rover PC #machine WYSE9150se # WYSE 9150se Thin Client #machine NT-A3500 # Foxconn AMD E-350 Barebone #machine NT-535 # Foxconn Intel D525 Barebone #machine Dell-FX170 # Dell FX170 D525 Atom Machine machine VMWare # A good set of modules for a VmWare Virtual Machine #machine Virtualbox-4.1 # A good set of modules for a Virtualbox Virtual Machine #machine VIA-Epia-CLE266 # VIA Epia/Eden based on the the CLE266 chip. Rather common in thin clients a few years old #machine classic_generic # Big list of modules that you can choose by unremarking them #machine IGEL-M300C # Igel CX700 Via #machine HP-t5135 # HP CX700 Via #!!Wireless Stuff #package wpa_supplicant #package wireless #package wifi-connect #!!!Misc Modules #!!Filesystem Support # Every mounted device needs a filesystem, so choose which ones you need. module usb-storage #module autofs4 # Automount and autofs support module isofs # ISO9960 file system support for CDRoms module udf # CDRom UDF file system support module vfat # Fat and VFat file system support #module ntfs # NTFS file system support #module ext2 # Ext2 file system support #module ext3 # Ext3 file system support module ext4 # Ext4 file system support #module nfs # NFS file system support #module cifs # CIFS support (use either this or smbfs - not both) module squashfs ################################################# ### --- Packages to include in boot image --- ### ################################################# # A package is a program or utility. # Any packages may be added as "package" or "pkg". # If defined as a "package", the program is included in the boot image. # If defined as a "pkg", the program is added from outside the image. # Normally, you should use "package". Only use "pkg" if you want to # dynamically load programs. # --- Packages to include in boot image # --- Packages below may be "package" or "pkg" #!!Miscellaneous package ts-classic # The classic ts logic for network/netfiles/hostname/mounting/telnetd/telnet/playcd #package automount #package networkmanager #package udisks-glue package ntp # Utility to obtain date & time from network #package sound-esd # Enable sound-esd or sound-nasd if you want to be able to control #package sound-nasd # sound on your thin client from another computer or # your remote session. #package alsa-lib package alsa-utils #package gnome-media package gnome-network-properties package gnome-core package volumeicon #package kismet #package gst-plugins-base #package gst-plugins-good #package crystalhd #package libva #package iptables # IP Tables support #package cpufreq #package cpuspeed #package wine # Windows Application Execution Platform #!!X related # --- XOrg 7.6 package xorg7-apm package xorg7-ark package xorg7-chips package xorg7-cirrus package xorg7-glint package xorg7-i128 package xorg7-mach64 package xorg7-mga package xorg7-neomagic package xorg7-r128 package xorg7-rendition package xorg7-s3 package xorg7-s3virge package xorg7-savage package xorg7-siliconmotion package xorg7-sis package xorg7-sisusb package xorg7-sun package xorg7-tdfx package xorg7-tga package xorg7-trident package xorg7-tseng package xorg7-v4l package xorg7-vesa #A fallback driver that works with almost everything. Does allow resolution changes package xorg7-vmware package xorg7-ztv package xorg7-ati #ATI video driver for most modern ATI chipsets. Usually requires several firmwares package xorg7-nv #Old opensource nvidia driver package xorg7-nouveau #New opensource nvidia driver package xorg7-nvidia #Proprietary nvidia driver package xorg7-openchrome #Via Video Chipsets driver package xorg7-geode #Geode Video driver package xorg7-i740 #Intel video driver for really old chipsets package xorg7-intel #Intel video driver for most modern chipsets except the GMA3500/3600 package xorg7-fbdev #A fallback driver that works with almost everything. Does *not* allow resolution changes #!!Locale or localization files for keyboard and fonts. (Language/Country) #package locale-cs_CZ # Czech #package locale-da_DK # Danish #package locale-de_DE # German #package locale-en_GB # English-Great Britain package locale-en_US # English-US #package locale-es_ES # Spanish #package locale-fi_FI # Finnish #package locale-fr_BE # French Belgium #package locale-fr_CA # French Canadian #package locale-fr_CH # French Switzerland #package locale-fr_FR # French #package locale-hr_HR # Croation #package locale-hu_HU # Hungarian #package locale-it_IT # Italian #package locale-ja_JP # Japanese #package locale-nb_NO # Norwegian (bokmål) #package locale-pl_PL # Polish #package locale-pt_PT # Portuguese #package locale-pt_BR # Portuguese-Brazil #package locale-ru_RU # Russian #package locale-sv_SE # Swedish #package locale-tr_TR # Turkish #!Applications #!!Connection Package types. Choose *at least* one! #package freerdp # X RDP Client - fork of rdesktop package rdesktop # X RDP client for Windows Terminal Services (ver 1.7) #package vncviewer # VNC client (vncviewer) #package xorg7vnc # Remote Control Client Workstation #package ica # Citrix ICA client support #package tarantella # Tarantella client support #package xnest # XDM in a window client #package urxvt # Light Xterm Client (vt102) #package xterm # Xterm Client (vt220) #package ssh # Secure Shell client #package tn5250 # 5250 terminal emulator #package dillo # Dillo light web browser #package thinlinc # Cendio ThinLinc client support #package nx # No Machine NX client #package 2x # 2X client #package java # Java runtime #package firefox_lowmem # Firefox 3 for low resource machines #package firefox # Firefox current Web Browser package chrome # Google Chrome Web Browser #package kiosk # Rkiosk Plugin for Firefox #package flash_lowmem # Flash 9 browser plugin for firefox and low resource machines #package flash # Flash Current #package filezilla # FileZilla FTP Client for X #package git # GIT Version Control System #package gparted # Gnome Partition Manager package open-vm-tools #package medit # Notepad #package mplayer # DVD and video player #package vmview # VMware Open-View Client, no PCoIP #package vmviewpcoip # VMware Open-View Client, PCOIP #package xbmc # XBMC Media Center for X #package xpdf # X PDF Viewer #!!Window Managers. Choose no more than 1 window manager. # Not needed if you don t want to manage windows. #package openbox # A spartin clean/fast window manager. #package xdesktop-kiosk # A locked down desktop kiosk using the openbox wm (See packages/xdesktop-kiosk/build/conf for # more help. #package icewm # "ICEWM" window manager. Makes TS a light workstation. #package icewm-theme-xp #package icewm-themes # Extra IceWM themes #package icewm-theme-bernstein #package icewm-theme-bluecrux #package icewm-theme-liquid package xfwm4 #package xfwm4-extra package terminal # Terminal emulator for xfwm4 -- Pulls in xfwm4 package thunar # File Manager for xfwm4 -- Pulls in xfwm4 #!!Window Manager Utils #package idle-shutdown # Package that lets you specify automatic shutdown settings and logic. #package wbar # Adds icons to desktop #package idesk #package conky # embeds some infos in the background of the desktop. Hostname / IP / CPU ala BGINFO for windows #!!Other services #package www # Web access to client. From a browser: "http://<IP number>" # The standard page is for general user settings, administrative access # is on port 6800. #package lp_server # Remote printing daemon (JetDirect compatible) #package lpr # LPR Print Server, for use with samba-server package #package lprng # LPRng Print Server, supports network based printing #package sshd # Dropbear secure shell server #package tftpd # Built in tftpd server. Useful for making a tftpserver # for thinstation on a WAN over a slow link. #package samba-server # Samba server FS Support, allows you to share # local floppy/cdrom/hd/printer to other Windows # PCs. Needs supermount for removeable media. #package samba-client # Samba smbclient, gives a shell like environment to access an samba server #package hdupdate # Package for updating TS images on a hardisk over a network connection #package scp # Add ability to download files over internet using scp. This package # adds some networking based options for downloading configuration files or # in using hdupdate package. #package openvpn # OpenVPN Client Support #!!PCSCD Card Readers #package gemplus410 # Card reader Gemplus 410 (Serial) and Gemplus 430 (USB) #package ccidreader # Generic USB card reader #!!Miscellaneous package gtk-2.0 # Full gtk-2.0 plus clearlooks theme package icons-cursor # Anti Aliased Mouse Cursor Theme package icons-hicolor # Hi-Color icons for some applications and themes. Does not really contain any icons. package icons-gnome # gnome Hi-Color icons theme. Needed by most other icon themes. #package icons-tango # tango Hi-Color icons theme #package icons-neu # neu Hi-Color icons theme package fonts-misc #package fonts-TTF-liberation #package fonts-jis-misc # Japanese Industrial #package fonts-util #package fonts-cyrillic package fonts-Speedo-Bitstream package fonts-TTF-BH # This one works nicely most of the time and is small. package fonts-TTF-vera #package fonts-TTF-liberation #package fonts-75dpi-Adobe #package fonts-75dpi-Adobe-Utopia #package fonts-75dpi-BH #package fonts-75dpi-BH-Typewriter #package fonts-75dpi-Bitstream #package fonts-100dpi-Adobe #package fonts-100dpi-Adobe-Utopia #package fonts-100dpi-BH #package fonts-100dpi-BH-Typewriter #package fonts-100dpi-Bitstream package fonts-Type1-Adobe-Utopia package fonts-Type1-BH package fonts-Type1-Bitstream package fonts-Type1-IBM package fonts-Type1-xfree86 #package lshw # list hardware #package e3 # Basic vi like Editor #package rox # Basic File Manager #package wgetpaste # Upload Logiles to pastebin / better debug for Mailinglist / Forum Help #package debug # metapackage to include other debugging packages and stop during bootup to check things. package extensions # Adds various shell commands, will increase image size. #package extensions-x # Adds various utility s for the X Environment !!!! INCLUDES hwlister.sh !!!! #package eGalax # eGalax TouchKit Drivers/Utility for serial and usb touchscreens by EETI. #package installer # Wipes a drive, makes partitions and downloads thinstation from a pxe server #package devstation # Starts a tftp server that hosts files from the boot-images/pxe folder # Parameters ######################################## ### --- Miscellaneous Parameters --- ### ######################################## #!!Basic #param fastboot true # Mangles the filesystem a special way as to improve boot spead and reduce # memory utilization. Cool/Dangerous . Harder to dubug other packages. (Finishing Touch) # Set to 'true' to enable or 'lotsofmem' for slightly slower booting but no squash lag on app launch. param rootpasswd pleasechangeme # Do Change! Console/telnet password for root # If this is enabled, Telnetd will be enabled. param xorgvncpasswd pleasechangeme # VNC Access Password param storagepasswd pleasechangeme # Password for storage server param dialuppasswd pleasechangeme # Password for dialin account param sambapasswd pleasechangeme # Password for samba shares when using user mode security #param kernelcmdline "radeon.modeset=0" # Add additional kernel command lines. e.g. disable radeon framebuffer #param stripelf yes # Strip extraneous information from elf binaries (Maybe not Safe) #param acpisupport disable # Tells the kernel not to load acpi modules. (Breaks some Intel Chipsets if disabled) #param uvesafb disable # Disable uvesafb (legacy option like modesetfb) #param extra_vid LVDS-1:d # Add an extra video= parameter to kernel cmd line (good for disabling outputs on video cards) param bootlogo true # Enable or Disable the use of the Boot splash. param boottheme default # Backgound picture during boot #param splash verbose # kernel splash setting (0=off, silent or verbose (default=silent) param splash silent param fbmtrr 0 # MTRR value for uvesafb (default = 0, 4 is the best) grep your log to make sure you have not set it to high #param fbnocrtc true # This is usually a good thing. param fbsm ywrap # Window scrolling method (redraw, ypan, ywrap) ywrap is best, but may not work correctly for all people #param fbvtotal 16 # Override Video Bios Reported Memory in MB #param fbmaxhf 67 # Override Video Negotiated Max Horizontal Frequency #param fbmaxvf 61 # Override Video Negotiated Max Vertical Frequency #param fbmaxclk 155 # Override Video Negotiated Max Clock Frequency #param fbnoedid true # Don t do video edid #param bootresolution 1024x600-32 # Resolution used during Thinstation boot. #param bootresolution 1024x768-32 # You can wright your own resolution mode here, if you know it. #param bootresolution 1152x864-32 param bootresolution 1280x768-32 #param bootresolution 1366x768-32 # Otherwise, you may want to refer to the vbe_modes.list you created with hwlister.sh #param bootresolution 1280x1024-32 # for modes that your card supports. #param bootresolution 1400x900-32 # It is also used by xrandr if no xrandr options are specified. #param bootresolution 1680x1050-32 #param bootresolution 1920x1080-32 #param bootresolution 1400x1050-32 param desktop file:./backgrounds/Hive_Lite.jpg # Custom image to load as desktop background param defaultconfig thinstation.conf.buildtime # The file with default setup. No other config file is found # during boot. param basename thinstation # Used for all config/tftp/scp file names param basepath ts5.0 # Used to determine path to tftp/scp files param baseurl www.doncuppjr.net # Used to determine url to wget files #param keyfile ./id_rsa # Path for private key file used for ssh/scp #param knownhosts ./known_hosts # Path for ssh known_hosts file for ssh/scp #param localpkgs false # to determine is PKG files are to be loaded locally param fulllocales true # Use full locale support for packages #param icaencryption false # Use ica encryption support, add 290k to image param haltonerror false # Will halt on error, default is true param hardlinkfs true param sametimestmp true # When enabled, the timestamps for all files and folders will be set to 00:00 of todays date in your timezone param initrdcmd "gzip -9" # Compression mode and level of initrd file. none, gzip -9, lzma -9 ,bzip2 -9 param bootverbosity 3 # Increased vebosity when booting TS # 0 no verbose messages # 1 boot # 2 network # 4 init # 8 kernel # 16 modules # 32 packages # 64 email bootlog file to SMTP server & user set in # thinstation.conf file. This will only work # if networking is working. # # Combinations can be used (e.g.12 does Kernel and Module Messages) #!!Advanced # Leave this alone unless you can t download (wget required on your Linux box): param downloads /downloads param bootimages "iso syslinux pxe" param syslinuxtheme "default" #param httpproxy http://192.168.1.2:8080 #param bootfssize 50% # Modify the size of the tmpfs filesystem #param livecd true # Adds a multi-resolution boot menu to cd images. #package alltimezone #package allres # Includes a lot of resolution splash images for live-cd s #package allfirmware # Includes a lot of firmwares for live-cd s И thinstation.conf.buildtime ВНИМАНИЕ: Спойлер! [ Нажмите, чтобы развернуть ][ Нажмите, чтобы скрыть ] AUDIO_LEVEL=90 MIC_LEVEL=0 #X_DPI=100 #USE_XRANDR=TRUE #XRANDR_OPTIONS="-s 1680x1050" #MEMORY_CONSTRAINED="TRUE" SESSION_0_TYPE=xfwm4 SESSION_1_TYPE=chrome ICEWM_THEME=blueCrux SESSION_0_AUTOSTART=on SESSION_1_AUTOSTART=off SAMBA_SECURITY=user SAMBA_WORKGROUP=WORKGROUP NO_SESSION="poweroff" #SESSION_1_FIREFOX_HOMEPAGE=http://www.doncuppjr.net/projects XFWM4_COMPOSITING=true XFWM4_BRIGHTNESS="-33" DESKTOP_ICON_SIZE=48 DESKTOP_FONT_SIZE=8 SESSION_1_CHROME_HOMEPAGE=http://www.doncuppjr.net/projects GTK_THEME=Xfce XFWM4_THEME=Default XFWM4_RED=0 XFWM4_BLUE=0 XFWM4_GREEN=0 PANEL_PAGER=false PANEL_USER=false PANEL_REV_CLOCKSYSTRAY=true ICONS_THEME="gnome" ICONS_CUT_SIZES="256x256 scalable" #SERVER=192.168.21.100 #MENU_SHOWRES=off #MENU_SHOWAPPS=off #MENU_SHOWABOUT=off #MENU_SHOWLOGOUT=off #HIDE_CONTROLS=on #SCREEN_BLANK_TIME=0 #SCREEN_STANDBY_TIME=0 #SCREEN_SUSPEND_TIME=0 #SCREEN_OFF_TIME=0 #SCREEN_HORIZSYNC="30-70 | *" #DONT_VT_SWITCH_STATE=TRUE #DONT_ZAP_STATE=TRUE #ALWAYS_ENTER_SERVER=TRUE #FASTBOOT_URL=http://192.168.21.51 NET_USE=BOTH NET_USE_DHCP=on NET_HOSTNAME=ts_* NET_FILE_ENABLED=On NET_TELNETD_ENABLED=ON #Iskamed NET_FILE_METHOD=tftp #DEBUGPAUSE=TRUE #EGALAX_DEVICE=/dev/ttyS1 #EGALAX_DEVICE=usbauto #EGALAX_PARAMFILE=/boot/eeti.param #RECONNECT_PROMPT=AUTO TIME_ZONE=America/Los_Angeles NET_TIME_SERVER=us.pool.ntp.org NET_REMOTE_ACCESS_FROM="0.0.0.0" #X_DRIVER_OPTION1="HWcursor False" #X_DRIVER_OPTION2="PanelSize 1024x600" #WIRELESS_ESSID="Example" #WIRELESS_MODE="managed" #WIRELESS_WPAKEY="3x@mpl39@559hr@53" #WIRELESS_DRIVER="wext" #TFTP_BLOCKSIZE=8192 TFTP_BLOCKSIZE=1024 BIND_MOUNT0="home:/root" BIND_MOUNT1="boot:/boot" BIND_MOUNT2="tsdev:/thinstation" USB_STORAGE_SYNC=on |
Последнее редактирование: 21 Фев 2013 18:49 от mongol.
Администратор запретил публиковать записи гостям.
|
Re: Проблемы с железом 21 Фев 2013 19:17 #595
|
В thinstation.conf.buildtime пропишите
SESSION_0_TYPE=rdesktop SESSION_0_SCREEN=1 SESSION_0_RDESKTOP_SERVER=192.168.0.3 SESSION_0_RDESKTOP_OPTIONS="-u 'terminal10' -p '12345' -a 16" вместо SESSION_0_TYPE=xfwm4 Если нормально загрузится - бум разбираться с остальным. |
Нужна индивидуальная помощь - обращайтесь shweew[кобель]it-advisor.ru
Реквизиты для материальной поддержки проекта =>
Администратор запретил публиковать записи гостям.
|
Re: Проблемы с железом 21 Фев 2013 19:22 #596
|
mongol пишет:
Запустил в десктопе Thinstation эмулятор терминала и написал: ping 192.168.0.3 Я не вижу в build.conf ссылки на Вашу папку с файлами module.list ("список дров") и т.п.Получил ошибку: Network is untechable Получается, что Thinstation не видит сетку или дров на нее. Я так понял. Хочу отметить, что Thinstation будет исопльзоваться на 10-ти разных машинах, поэтому, дрова нужны разные. Читайте мануалы внимательно. |
Нужна индивидуальная помощь - обращайтесь shweew[кобель]it-advisor.ru
Реквизиты для материальной поддержки проекта =>
Последнее редактирование: 21 Фев 2013 19:35 от admin.
Администратор запретил публиковать записи гостям.
|
Re: Проблемы с железом 22 Фев 2013 11:09 #597
|
Я так понял, что thinstation.conf.buildtime - это для первой загрузки с tftp, потом делаем файлик module.list, создаем свою машину, ложим туда это файл, прописываем его в build.conf. Затем делаем ./build и готово?
|
Администратор запретил публиковать записи гостям.
|
Re: Проблемы с железом 22 Фев 2013 11:20 #598
|
mongol пишет:
...делаем ./build и готово? Как бы да. |
Нужна индивидуальная помощь - обращайтесь shweew[кобель]it-advisor.ru
Реквизиты для материальной поддержки проекта =>
Администратор запретил публиковать записи гостям.
|
Re: Проблемы с железом 22 Фев 2013 11:21 #599
|
Что-то я раскомментил все package xorg7 в build.conf и нег рузятся теперь иксы(
Не могу даже в консоль Ctrl+Alt+F3 зайти( |
Последнее редактирование: 22 Фев 2013 11:22 от mongol.
Администратор запретил публиковать записи гостям.
|
Re: Проблемы с железом 22 Фев 2013 11:31 #600
|
После того, как новую сборку собитраюсь делать, т.е. thinstation.conf.buildtime новый и build.conf новый написал, нужно делать команду ./build --allmodules ?
|
Администратор запретил публиковать записи гостям.
|
Re: Проблемы с железом 22 Фев 2013 11:50 #602
|
mongol пишет:
После того, как новую сборку собитраюсь делать, т.е. thinstation.conf.buildtime новый и build.conf новый написал, нужно делать команду ./build --allmodules ? ./build --allmodules только для получения module.list |
Нужна индивидуальная помощь - обращайтесь shweew[кобель]it-advisor.ru
Реквизиты для материальной поддержки проекта =>
Администратор запретил публиковать записи гостям.
|
Re: Проблемы с железом 22 Фев 2013 11:51 #603
|
admin пишет:
mongol пишет:
Что-то я не понял. я module.list доставал из машинки рабочей, которая грузилась с сервака.После того, как новую сборку собитраюсь делать, т.е. thinstation.conf.buildtime новый и build.conf новый написал, нужно делать команду ./build --allmodules ? ./build --allmodules только для получения module.listДелал вот так: ВНИМАНИЕ: Спойлер! [ Нажмите, чтобы развернуть ][ Нажмите, чтобы скрыть ] выполним команду hwlister.sh, которая сгенерирует один, два или три файла: module.list(всегда), vbe_modes.list(возможно) и firmware.list (может быть). Эти файлы сохраняются в корне загруженной файловой системы ТК. Забрать эти файлы можно, например, флешкой или дать всем право на запись в корневом каталоге TFTP-сервера, куда эти файлы загрузятся при вылнении команды hwlister.sh(или создать заранее эти файлы в корне TFTP-сервера и поставить бит записи только на эти файлы). создадим в каталоге ts/5.x/machine подкаталог, например, с именем test_tc и положим туда файлы, созданные командой hwlister.sh создадим новый параметр в файле build.conf - machine test_tc выполним сборку [root@TS_chroot]/ts/5.1# ./build Может, есть другой способ получить module.list ? |
Последнее редактирование: 22 Фев 2013 11:57 от mongol.
Администратор запретил публиковать записи гостям.
|
Re: Проблемы с железом 22 Фев 2013 11:59 #605
|
ЧТо нужно раскомментировать в файле build.conf, чтобы работали иксы и любые сетевые карты?
|
Администратор запретил публиковать записи гостям.
|
Re: Проблемы с железом 22 Фев 2013 11:59 #606
|
mongol пишет:
...Может, есть другой способ получить module.list ? А это не работает что ли? |
Нужна индивидуальная помощь - обращайтесь shweew[кобель]it-advisor.ru
Реквизиты для материальной поддержки проекта =>
Администратор запретил публиковать записи гостям.
|
Re: Проблемы с железом 22 Фев 2013 12:00 #607
|
mongol пишет:
ЧТо нужно раскомментировать в файле build.conf, чтобы работали иксы и любые сетевые карты? Не знаю, не пробовал. Скрее всего ./build --allmodules поможет, но ядро будет большое. |
Нужна индивидуальная помощь - обращайтесь shweew[кобель]it-advisor.ru
Реквизиты для материальной поддержки проекта =>
Последнее редактирование: 22 Фев 2013 12:06 от admin.
Администратор запретил публиковать записи гостям.
|
Re: Проблемы с железом 22 Фев 2013 12:14 #609
|
admin пишет:
mongol пишет:
Плевать, насколько оно большое. Главное, чтобы сетка работала, иксы и принтеры.ЧТо нужно раскомментировать в файле build.conf, чтобы работали иксы и любые сетевые карты? Не знаю, не пробовал. Скрее всего ./build --allmodules поможет, но ядро будет большое.Пока не получается вообще. |
Администратор запретил публиковать записи гостям.
|
Re: Проблемы с железом 22 Фев 2013 12:20 #610
|
Сейчас ошибка при загрузке по PXE.
Sysytem kernel error ... missing cernel modules or drivers ...XServer. Собираю по инструкции: z1kk0.blogspot.ru/2012/06/thinstation-5.html Может, кам ошибка? |
Последнее редактирование: 22 Фев 2013 12:29 от mongol.
Администратор запретил публиковать записи гостям.
|
Re: Проблемы с железом 22 Фев 2013 12:40 #611
|
thinstation.conf.buildtime
ВНИМАНИЕ: Спойлер! [ Нажмите, чтобы развернуть ][ Нажмите, чтобы скрыть ] AUDIO_LEVEL=90 MIC_LEVEL=0 #X_DPI=100 #USE_XRANDR=TRUE #XRANDR_OPTIONS="-s 1680x1050" #MEMORY_CONSTRAINED="TRUE" SESSION_0_TYPE=rdesktop SESSION_0_SCREEN=1 SESSION_0_RDESKTOP_SERVER=192.168.0.3 SESSION_0_RDESKTOP_OPTIONS="-u 'terminal10' -p '12345' -a 16" SESSION_1_TYPE=chrome ICEWM_THEME=blueCrux SESSION_0_AUTOSTART=on SESSION_1_AUTOSTART=off SAMBA_SECURITY=user SAMBA_WORKGROUP=WORKGROUP NO_SESSION="poweroff" #SESSION_1_FIREFOX_HOMEPAGE=http://www.doncuppjr.net/projects XFWM4_COMPOSITING=true XFWM4_BRIGHTNESS="-33" DESKTOP_ICON_SIZE=48 DESKTOP_FONT_SIZE=8 SESSION_1_CHROME_HOMEPAGE=http://www.doncuppjr.net/projects GTK_THEME=Xfce XFWM4_THEME=Default XFWM4_RED=0 XFWM4_BLUE=0 XFWM4_GREEN=0 PANEL_PAGER=false PANEL_USER=false PANEL_REV_CLOCKSYSTRAY=true ICONS_THEME="gnome" ICONS_CUT_SIZES="256x256 scalable" #SERVER=192.168.21.100 #MENU_SHOWRES=off #MENU_SHOWAPPS=off #MENU_SHOWABOUT=off #MENU_SHOWLOGOUT=off #HIDE_CONTROLS=on #SCREEN_BLANK_TIME=0 #SCREEN_STANDBY_TIME=0 #SCREEN_SUSPEND_TIME=0 #SCREEN_OFF_TIME=0 #SCREEN_HORIZSYNC="30-70 | *" #DONT_VT_SWITCH_STATE=TRUE #DONT_ZAP_STATE=TRUE #ALWAYS_ENTER_SERVER=TRUE #FASTBOOT_URL=http://192.168.21.51 NET_USE=BOTH NET_USE_DHCP=on NET_HOSTNAME=ts_* NET_FILE_ENABLED=On NET_FILE_METHOD=tftp NET_TELNETD_ENABLED=ON #DEBUGPAUSE=TRUE #EGALAX_DEVICE=/dev/ttyS1 #EGALAX_DEVICE=usbauto #EGALAX_PARAMFILE=/boot/eeti.param #RECONNECT_PROMPT=AUTO TIME_ZONE=America/Los_Angeles NET_TIME_SERVER=us.pool.ntp.org NET_REMOTE_ACCESS_FROM="0.0.0.0" #X_DRIVER_OPTION1="HWcursor False" #X_DRIVER_OPTION2="PanelSize 1024x600" #WIRELESS_ESSID="Example" #WIRELESS_MODE="managed" #WIRELESS_WPAKEY="3x@mpl39@559hr@53" #WIRELESS_DRIVER="wext" #TFTP_BLOCKSIZE=8192 TFTP_BLOCKSIZE=1024 BIND_MOUNT0="home:/root" BIND_MOUNT1="boot:/boot" BIND_MOUNT2="tsdev:/thinstation" USB_STORAGE_SYNC=on Build.conf ВНИМАНИЕ: Спойлер! [ Нажмите, чтобы развернуть ][ Нажмите, чтобы скрыть ] ################################################ ### --- Thinstation Build Config --- ### ################################################ # # # This is Thinstation s basic setup file. In this file you decide which # hardware, programs and features to be included in the Thinstation # boot image generated by running "./build". # # You can customize/limit the possibilities in the thinstation.conf # files later. # # Anything after a "#" is a comment. You activate "things" by removing # the "#" and remove "things" by putting a "#" in front of them. # # First we define which modules to include. Modules are hardware # drivers. NEVER include more than necessary - the more modules, the # longer boot time. ######################################################## ### --- Machine Modules to include in boot image --- ### ######################################################## # A machine profile is a set of modules for a specific set of hardware # components like a thinclient with adapters. It does not include any # filesystem modules, those need to be selected individualy. Making a # a machine profile is a two step process. First you will need to make # an allmodules build like "./build --allmodules" with the extensions-x # package included. Once the client machine is booted with that image # you can open and xterm or telnet in and run "hwlister.sh". hwlister.sh # will compile some lists and attempt to post them to the pxe server assigned # to the client. If the pxe server is this workstation and you are hosting # files directly out of this build env, you can then run # "./mkmachine SOME-MODEL" and the files will be put into the machine folder # under that model name. Now all you have to do is add a line to this file # like "machine SOME-MODEL" and you will no longer have to make # allmodules builds. If this is not the pxe server, you will have to # move stuff around on your own, but the most important files are # modules.list and firmware.list. ################################################ ### --- Modules to include in boot image --- ### ################################################ # Any modules may be added as "module" or "module_pkg". # If defined as a "module", the driver is included in the boot image. # If defined as a "module_pkg", the driver is added from outside the # image, such as from a tftp server. See note below for more details. # # Normally you should use "module". Only use "module_pkg" if you want # to dynamically load modules. # Note: If you create a module_pkg network driver, and decide to load it # from a tftp server, it won t work. This is because the image # won t have a network driver to get the module_pkg in the first # place. #!Hardware #!!Machine module list #machine m704 # Gigabyte m704 Rover PC #machine WYSE9150se # WYSE 9150se Thin Client #machine NT-A3500 # Foxconn AMD E-350 Barebone #machine NT-535 # Foxconn Intel D525 Barebone #machine Dell-FX170 # Dell FX170 D525 Atom Machine machine VMWare # A good set of modules for a VmWare Virtual Machine #machine Virtualbox-4.1 # A good set of modules for a Virtualbox Virtual Machine #machine VIA-Epia-CLE266 # VIA Epia/Eden based on the the CLE266 chip. Rather common in thin clients a few years old #machine classic_generic # Big list of modules that you can choose by unremarking them #machine IGEL-M300C # Igel CX700 Via #machine HP-t5135 # HP CX700 Via #machine iskamed #!!Wireless Stuff #package wpa_supplicant #package wireless #package wifi-connect #!!!Misc Modules #!!Filesystem Support # Every mounted device needs a filesystem, so choose which ones you need. module usb-storage #module autofs4 # Automount and autofs support module isofs # ISO9960 file system support for CDRoms module udf # CDRom UDF file system support module vfat # Fat and VFat file system support #module ntfs # NTFS file system support #module ext2 # Ext2 file system support #module ext3 # Ext3 file system support module ext4 # Ext4 file system support #module nfs # NFS file system support #module cifs # CIFS support (use either this or smbfs - not both) module squashfs ################################################# ### --- Packages to include in boot image --- ### ################################################# # A package is a program or utility. # Any packages may be added as "package" or "pkg". # If defined as a "package", the program is included in the boot image. # If defined as a "pkg", the program is added from outside the image. # Normally, you should use "package". Only use "pkg" if you want to # dynamically load programs. # --- Packages to include in boot image # --- Packages below may be "package" or "pkg" #!!Miscellaneous package ts-classic # The classic ts logic for network/netfiles/hostname/mounting/telnetd/telnet/playcd #package automount #package networkmanager #package udisks-glue package ntp # Utility to obtain date & time from network #package sound-esd # Enable sound-esd or sound-nasd if you want to be able to control #package sound-nasd # sound on your thin client from another computer or # your remote session. #package alsa-lib package alsa-utils #package gnome-media package gnome-network-properties package gnome-core package volumeicon #package kismet #package gst-plugins-base #package gst-plugins-good #package crystalhd #package libva #package iptables # IP Tables support #package cpufreq #package cpuspeed #package wine # Windows Application Execution Platform #!!X related # --- XOrg 7.6 package xorg7-apm package xorg7-ark package xorg7-chips package xorg7-cirrus package xorg7-glint package xorg7-i128 package xorg7-mach64 package xorg7-mga package xorg7-neomagic package xorg7-r128 package xorg7-rendition package xorg7-s3 package xorg7-s3virge package xorg7-savage package xorg7-siliconmotion package xorg7-sis package xorg7-sisusb package xorg7-sun package xorg7-tdfx package xorg7-tga package xorg7-trident package xorg7-tseng package xorg7-v4l package xorg7-vesa #A fallback driver that works with almost everything. Does allow resolution changes package xorg7-vmware package xorg7-ztv package xorg7-ati #ATI video driver for most modern ATI chipsets. Usually requires several firmwares package xorg7-nv #Old opensource nvidia driver package xorg7-nouveau #New opensource nvidia driver package xorg7-nvidia #Proprietary nvidia driver package xorg7-openchrome #Via Video Chipsets driver package xorg7-geode #Geode Video driver package xorg7-i740 #Intel video driver for really old chipsets package xorg7-intel #Intel video driver for most modern chipsets except the GMA3500/3600 package xorg7-fbdev #A fallback driver that works with almost everything. Does *not* allow resolution changes #!!Locale or localization files for keyboard and fonts. (Language/Country) #package locale-cs_CZ # Czech #package locale-da_DK # Danish #package locale-de_DE # German #package locale-en_GB # English-Great Britain package locale-en_US # English-US #package locale-es_ES # Spanish #package locale-fi_FI # Finnish #package locale-fr_BE # French Belgium #package locale-fr_CA # French Canadian #package locale-fr_CH # French Switzerland #package locale-fr_FR # French #package locale-hr_HR # Croation #package locale-hu_HU # Hungarian #package locale-it_IT # Italian #package locale-ja_JP # Japanese #package locale-nb_NO # Norwegian (bokmål) #package locale-pl_PL # Polish #package locale-pt_PT # Portuguese #package locale-pt_BR # Portuguese-Brazil #package locale-ru_RU # Russian #package locale-sv_SE # Swedish #package locale-tr_TR # Turkish #!Applications #!!Connection Package types. Choose *at least* one! package freerdp # X RDP Client - fork of rdesktop package rdesktop # X RDP client for Windows Terminal Services (ver 1.7) #package vncviewer # VNC client (vncviewer) package xorg7vnc # Remote Control Client Workstation #package ica # Citrix ICA client support #package tarantella # Tarantella client support #package xnest # XDM in a window client #package urxvt # Light Xterm Client (vt102) #package xterm # Xterm Client (vt220) #package ssh # Secure Shell client #package tn5250 # 5250 terminal emulator #package dillo # Dillo light web browser #package thinlinc # Cendio ThinLinc client support #package nx # No Machine NX client #package 2x # 2X client #package java # Java runtime #package firefox_lowmem # Firefox 3 for low resource machines #package firefox # Firefox current Web Browser package chrome # Google Chrome Web Browser #package kiosk # Rkiosk Plugin for Firefox #package flash_lowmem # Flash 9 browser plugin for firefox and low resource machines #package flash # Flash Current #package filezilla # FileZilla FTP Client for X #package git # GIT Version Control System #package gparted # Gnome Partition Manager package open-vm-tools #package medit # Notepad #package mplayer # DVD and video player #package vmview # VMware Open-View Client, no PCoIP #package vmviewpcoip # VMware Open-View Client, PCOIP #package xbmc # XBMC Media Center for X #package xpdf # X PDF Viewer #!!Window Managers. Choose no more than 1 window manager. # Not needed if you don t want to manage windows. #package openbox # A spartin clean/fast window manager. #package xdesktop-kiosk # A locked down desktop kiosk using the openbox wm (See packages/xdesktop-kiosk/build/conf for # more help. #package icewm # "ICEWM" window manager. Makes TS a light workstation. #package icewm-theme-xp #package icewm-themes # Extra IceWM themes #package icewm-theme-bernstein #package icewm-theme-bluecrux #package icewm-theme-liquid package xfwm4 #package xfwm4-extra package terminal # Terminal emulator for xfwm4 -- Pulls in xfwm4 package thunar # File Manager for xfwm4 -- Pulls in xfwm4 #!!Window Manager Utils #package idle-shutdown # Package that lets you specify automatic shutdown settings and logic. #package wbar # Adds icons to desktop #package idesk #package conky # embeds some infos in the background of the desktop. Hostname / IP / CPU ala BGINFO for windows #!!Other services #package www # Web access to client. From a browser: "http://<IP number>" # The standard page is for general user settings, administrative access # is on port 6800. #package lp_server # Remote printing daemon (JetDirect compatible) #package lpr # LPR Print Server, for use with samba-server package #package lprng # LPRng Print Server, supports network based printing #package sshd # Dropbear secure shell server #package tftpd # Built in tftpd server. Useful for making a tftpserver # for thinstation on a WAN over a slow link. #package samba-server # Samba server FS Support, allows you to share # local floppy/cdrom/hd/printer to other Windows # PCs. Needs supermount for removeable media. #package samba-client # Samba smbclient, gives a shell like environment to access an samba server #package hdupdate # Package for updating TS images on a hardisk over a network connection #package scp # Add ability to download files over internet using scp. This package # adds some networking based options for downloading configuration files or # in using hdupdate package. #package openvpn # OpenVPN Client Support #!!PCSCD Card Readers #package gemplus410 # Card reader Gemplus 410 (Serial) and Gemplus 430 (USB) #package ccidreader # Generic USB card reader #!!Miscellaneous package gtk-2.0 # Full gtk-2.0 plus clearlooks theme package icons-cursor # Anti Aliased Mouse Cursor Theme package icons-hicolor # Hi-Color icons for some applications and themes. Does not really contain any icons. package icons-gnome # gnome Hi-Color icons theme. Needed by most other icon themes. #package icons-tango # tango Hi-Color icons theme #package icons-neu # neu Hi-Color icons theme package fonts-misc #package fonts-TTF-liberation #package fonts-jis-misc # Japanese Industrial #package fonts-util #package fonts-cyrillic package fonts-Speedo-Bitstream package fonts-TTF-BH # This one works nicely most of the time and is small. package fonts-TTF-vera #package fonts-TTF-liberation #package fonts-75dpi-Adobe #package fonts-75dpi-Adobe-Utopia #package fonts-75dpi-BH #package fonts-75dpi-BH-Typewriter #package fonts-75dpi-Bitstream #package fonts-100dpi-Adobe #package fonts-100dpi-Adobe-Utopia #package fonts-100dpi-BH #package fonts-100dpi-BH-Typewriter #package fonts-100dpi-Bitstream package fonts-Type1-Adobe-Utopia package fonts-Type1-BH package fonts-Type1-Bitstream package fonts-Type1-IBM package fonts-Type1-xfree86 #package lshw # list hardware #package e3 # Basic vi like Editor #package rox # Basic File Manager #package wgetpaste # Upload Logiles to pastebin / better debug for Mailinglist / Forum Help #package debug # metapackage to include other debugging packages and stop during bootup to check things. package extensions # Adds various shell commands, will increase image size. #package extensions-x # Adds various utility s for the X Environment !!!! INCLUDES hwlister.sh !!!! #package eGalax # eGalax TouchKit Drivers/Utility for serial and usb touchscreens by EETI. #package installer # Wipes a drive, makes partitions and downloads thinstation from a pxe server #package devstation # Starts a tftp server that hosts files from the boot-images/pxe folder # Parameters ######################################## ### --- Miscellaneous Parameters --- ### ######################################## #!!Basic #param fastboot true # Mangles the filesystem a special way as to improve boot spead and reduce # memory utilization. Cool/Dangerous . Harder to dubug other packages. (Finishing Touch) # Set to 'true' to enable or 'lotsofmem' for slightly slower booting but no squash lag on app launch. param rootpasswd 12345 # Do Change! Console/telnet password for root # If this is enabled, Telnetd will be enabled. param xorgvncpasswd 12345 # VNC Access Password param storagepasswd 12345 # Password for storage server param dialuppasswd 12345 # Password for dialin account param sambapasswd 12345 # Password for samba shares when using user mode security #param kernelcmdline "radeon.modeset=0" # Add additional kernel command lines. e.g. disable radeon framebuffer #param stripelf yes # Strip extraneous information from elf binaries (Maybe not Safe) #param acpisupport disable # Tells the kernel not to load acpi modules. (Breaks some Intel Chipsets if disabled) #param uvesafb disable # Disable uvesafb (legacy option like modesetfb) #param extra_vid LVDS-1:d # Add an extra video= parameter to kernel cmd line (good for disabling outputs on video cards) param bootlogo true # Enable or Disable the use of the Boot splash. param boottheme default # Backgound picture during boot #param splash verbose # kernel splash setting (0=off, silent or verbose (default=silent) param splash silent param fbmtrr 0 # MTRR value for uvesafb (default = 0, 4 is the best) grep your log to make sure you have not set it to high #param fbnocrtc true # This is usually a good thing. param fbsm ywrap # Window scrolling method (redraw, ypan, ywrap) ywrap is best, but may not work correctly for all people #param fbvtotal 16 # Override Video Bios Reported Memory in MB #param fbmaxhf 67 # Override Video Negotiated Max Horizontal Frequency #param fbmaxvf 61 # Override Video Negotiated Max Vertical Frequency #param fbmaxclk 155 # Override Video Negotiated Max Clock Frequency #param fbnoedid true # Don t do video edid #param bootresolution 1024x600-32 # Resolution used during Thinstation boot. #param bootresolution 1024x768-32 # You can wright your own resolution mode here, if you know it. #param bootresolution 1152x864-32 param bootresolution 1280x768-32 #param bootresolution 1366x768-32 # Otherwise, you may want to refer to the vbe_modes.list you created with hwlister.sh #param bootresolution 1280x1024-32 # for modes that your card supports. #param bootresolution 1400x900-32 # It is also used by xrandr if no xrandr options are specified. #param bootresolution 1680x1050-32 #param bootresolution 1920x1080-32 #param bootresolution 1400x1050-32 param desktop file:./backgrounds/Hive_Lite.jpg # Custom image to load as desktop background param defaultconfig thinstation.conf.buildtime # The file with default setup. No other config file is found # during boot. param basename thinstation # Used for all config/tftp/scp file names param basepath ts5.0 # Used to determine path to tftp/scp files param baseurl www.doncuppjr.net # Used to determine url to wget files #param keyfile ./id_rsa # Path for private key file used for ssh/scp #param knownhosts ./known_hosts # Path for ssh known_hosts file for ssh/scp #param localpkgs false # to determine is PKG files are to be loaded locally param fulllocales true # Use full locale support for packages #param icaencryption false # Use ica encryption support, add 290k to image param haltonerror false # Will halt on error, default is true param hardlinkfs true param sametimestmp true # When enabled, the timestamps for all files and folders will be set to 00:00 of todays date in your timezone param initrdcmd "gzip -9" # Compression mode and level of initrd file. none, gzip -9, lzma -9 ,bzip2 -9 param bootverbosity 3 # Increased vebosity when booting TS # 0 no verbose messages # 1 boot # 2 network # 4 init # 8 kernel # 16 modules # 32 packages # 64 email bootlog file to SMTP server & user set in # thinstation.conf file. This will only work # if networking is working. # # Combinations can be used (e.g.12 does Kernel and Module Messages) #!!Advanced # Leave this alone unless you can t download (wget required on your Linux box): param downloads /downloads param bootimages "iso syslinux pxe" param syslinuxtheme "default" #param httpproxy http://192.168.1.2:8080 #param bootfssize 50% # Modify the size of the tmpfs filesystem #param livecd true # Adds a multi-resolution boot menu to cd images. #package alltimezone #package allres # Includes a lot of resolution splash images for live-cd s #package allfirmware # Includes a lot of firmwares for live-cd s |
Администратор запретил публиковать записи гостям.
|
Re: Проблемы с железом 22 Фев 2013 13:45 #612
|
mongol пишет:
Сейчас ошибка при загрузке по PXE. Смотрите лог на клиенте. Sysytem kernel error ... missing cernel modules or drivers ...XServer. Собираю по инструкции: z1kk0.blogspot.ru/2012/06/thinstation-5.html Может, кам ошибка? |
Нужна индивидуальная помощь - обращайтесь shweew[кобель]it-advisor.ru
Реквизиты для материальной поддержки проекта =>
Администратор запретил публиковать записи гостям.
|
Re: Проблемы с железом 22 Фев 2013 13:50 #613
|
Не могу посомтреть, потому, что машинка перезагружается(
Я правильно полнял, что файл modules используется только для определенной машины. А если собирать ./buils --allmodules, то образ будет лдя всех машин? |
Администратор запретил публиковать записи гостям.
|
Re: Проблемы с железом 22 Фев 2013 14:30 #614
|
mongol пишет:
...если собирать ./buils --allmodules, то образ будет лдя всех машин? Будет со всеми модулями. |
Нужна индивидуальная помощь - обращайтесь shweew[кобель]it-advisor.ru
Реквизиты для материальной поддержки проекта =>
Администратор запретил публиковать записи гостям.
|
Re: Проблемы с железом 22 Фев 2013 15:14 #615
|
Со всеми модулями, включенными в build.conf ?
А как влияет тогда файл thinstation.conf.buildtime на сборку со всеми модулями? |
Администратор запретил публиковать записи гостям.
|